Investigation of physico-chemical properties and microbial community during poultry manure co-composting process

Co-composting of poultry manure and rubber wood sawdust was performed with the ratio of 2:1(V/V) for a period of 60 days. An investigation was carried out to study the extracellular enzymatic activities and structural degradation utilizing Fourier transform infrared spectroscopy(FT-IR), thermogravimetry and differential thermal analysis(TG/DTA)and scanning electron microscopy(SEM). The microbial succession was also determined by using denaturing gel gradient electrophoresis(DGGE). The compost was able to reach its highest temperature of 71°C at day 3 and stabilized between 30 and 40°C for 8 weeks.CMCase, FPase and β-glucosidase acted synergistically in order to degrade the cellulosic substrate. The xylanase activities increased gradually during the composting and reached the peak value of 11.637 U/g on day 35, followed by a sharp decline. Both Li P and Mn P activities reached their peak values on day 35 with 0.431 and 0.132 U/g respectively. The FT-IR spectra revealed an increase in aromaticity and a decrease in aliphatic compounds such as carbohydrates as decomposition proceeded. TGA/DTG data exhibited significant changes in weight loss in compost samples, indicating degradation of organic matter. SEM micrographs showed higher amounts of parenchyma exposed on the surface of rubber wood sawdust at day 60, showing significant degradation. DGGE and 16 S r DNA analyses showed that Burkholderia sp., Pandoraea sp., and Pseudomonas sp. were present throughout the composting process. Ornithinibacillus sp. and Castellaniella ginsengisoli were only found in the initial stage of the composting, while different strains of Burkholderia sp. also occurred in the later stage of composting.     

Initiating automotive component reuse in Malaysia

As the production of local vehicles increases, the impact of end-of-life vehicles (ELVs) wastes to the environment will also increase. ELVs recovery including reuse, remanufacture, and recycle apparently become a strategy in solving this environmental problem. This study identifies the existing conditions of automotive reuse in Malaysia by conducting some interviews in selected local automotive and automotive component manufacturers. Results from the interviews indicated that reuse of automotive components in newly manufactured vehicles has never been practiced by the selected companies. However, there is interest among respondents in developing automotive components for after-market reuse. Some strategies were proposed in this study to initiate automotive components reuse in the local automotive manufacturers including the establishment of the end-of-life directive, enhance research and development on design for reuse and increase reusability and economic benefits of reuse.     

Time-lapse resistivity investigation of salinity changes at an ex-promontory land: a case study of Carey Island, Selangor, Malaysia

Time-lapse resistivity measurements and groundwater geochemistry were used to study salinity effect on groundwater aquifer at the ex-promontory-land of Carey Island in Malaysia. Resistivity was measured by ABEM Terrameter SAS4000 and ES10-64 electrode selector. Relationship between earth resistivity and total dissolved solids (TDS) was derived, and with resistivity images, used to identify water types: fresh (ρ ( e ) > 6.5 Ω m), brackish (3 Ω m < ρ ( e ) < 6.5 Ω m), or saline (ρ ( e ) < 3 Ω m). Long-term monitoring of the studied area's groundwater quality via measurements of its time-lapse resistivity showed salinity changes in the island's groundwater aquifers not conforming to seawater-freshwater hydraulic gradient. In some aquifers far from the coast, saline water was dominant, while in some others, freshwater 30 m thick showed groundwater potential. Land transformation is believed to have changed the island's hydrogeology, which receives saltwater pressure all the time, limiting freshwater recharge to the groundwater system. The time-lapse resistivity measurements showed active salinity changes at resistivity-image bottom moving up the image for two seasons' (wet and dry) conditions. The salinity changes are believed to have been caused by incremental tide passing through highly porous material in the active-salinity-change area. The study's results were used to plan a strategy for sustainable groundwater exploration of the island.     

Organochlorine levels in human blood from residents in areas of limited pesticide use in Sudan

Ninety-nine human blood samples were collected from the riverine region of northern Sudan and the traditional and mechanized rain-fed areas of western and eastern Sudan, representing areas of limited pesticide use in Sudan. Blood samples were analyzed for organochlorine pesticides by gas liquid chromatography (GLC) followed by electron-capture detection (ECD). p,p′-DDE (a metabolite of DDT), heptachlor epoxide, β-hexachlorocyclohexane (β-HCH), and dieldrin were detected in all locations surveyed. The level of total organochlorine burden was highest in the traditional rain-fed area, followed by the mechanized rain-fed area, and the riverine area. A highly significant correlation was observed between total organochlorine blood burden and the age of the donors (r = 0.608**).     

Critical success factors of sustainable manufacturing practices in Malaysian automotive industry

The purpose of this study is to examine the critical success factors of sustainable manufacturing practices (SMPs) in Malaysian automotive industry. The questionnaires were designed and distributed to the 50 respondents. The pilot study sample consists of 26 respondents from 50 questionnaires, with an average response rate of 52%. The results of reliability analysis show that social responsibility is critical factor influencing the direct SMPs implementation success. By implementing SMPs in Malaysian automotive industry, it can assist company to improve the quality of management. Thus, this study recommends that the future research explore the influence of SMPs on sustainable performance in Malaysian automotive industry.     

Life cycle inventory of the commercial production of compost from oil palm biomass: a case study

This paper compared the life cycle inventory (LCI) obtained from three commercial oil palm biomass composting projects in Malaysia which use the open windrow composting system. The LCI was obtained and calculated based on the functional unit of 1 t of compost produced. The input of the inventory are the feed materials such as empty fruit bunches (EFB) and palm oil mill effluent (POME); and utilities which include electricity generated at palm oil mill and diesel used. Composting 2.0–2.5 t of EFB and 5.0–7.5 t of POME required diesel from 218.7 to 270.2 MJ and electricity from 0 to 6.8 MJ. It is estimated that the composting emitted from 0.01 to 0.02 t CO_2eq/t_compost mainly from diesel used to operate machineries. Composting saved 65 % of time required for a complete degradation of POME when compared to ponding system, and 89 % of time required for a complete degradation of EFB compared to mulching. In terms of land required, it required 36 % less land as compared to ponding for POME and 99 % less land as compared to mulching for EFB. Based on the case study, diesel was found to be the main contributor to the environmental impact. There is a potential of upgrading the process to be more economical and environmental friendly. Using electricity as the source of energy has a lower footprint for the composting process. Instead of using raw POME, studies had reported that using treated POME either from anaerobic ponding or digested tank can accelerate the composting process.     

Behaviour moderates climate warming vulnerability in high-rocky-shore snails: interactions of habitat use, energy consumption and environmental temperature

High-rocky-shore intertidal animals are predicted to be generally more vulnerable to climate warming than lower-shore species, because their thermal tolerances lie closer to maximum environmental temperatures (T _e). However, this prediction is based on taxonomically and ecologically limited information. The present study investigated the effect of habitat use on climate warming vulnerability of the tropical high-shore snail, Echinolittorina malaccana (from Brunei Darussalam, 5°N), which aestivates in sun-exposed or shaded habitats. The thermal regimes of these habitats differed vastly, but snails showed similar daily energy consumption in either habitat, due to temperature-insensitive metabolism (TIM) between 35 and 46 °C in the sun-resting snails. However, maximum T _e values in the shade and the sun were 35 and 46 °C, respectively, suggesting that sun-resting snails, which presently experience temperatures near the incipient lethal temperature range (46–56 °C), should be more threatened by further warming than shade-resting snails, which have an 11 °C ‘safety margin’. Thus, vulnerability of high-shore species to climate warming could be moderated by availability of shaded habitat, making predictions for these species more complex than previously realized.     

Biosafety Act 2007: Does It Really Protect Bioethical Issues Relating To GMOS

Despite the (serious) global concerns about the safety and genetic stability of genetically modified organisms, the Malaysian National Biosafety Board (NBB) has recently approved the field testing for genetically modified (GM) male mosquitoes. With this development, bioethical issues, which in some respect could adversely impinge on the social, economic and environmental aspects of the society, have surfaced, and these concerns must be addressed by the authorities concerned. In reviewing this application, the National Biosafety Board has followed the requirements of the Biosafety Act 2007, which was created to strike a balance between promoting biotechnology and at the same time protecting against its potential environmental and human health risks in Malaysia. However, the 2007 Act fails to adequately take into account any bioethical issues in spite of the inclusion of a provision on socio-economic consideration. As part of an ongoing doctoral research project, and by way of an instrumental critique of the 2007 Act, the present paper attempts to address the role and function of the Malaysia biosafety legal framework in governing bioethical concerns relating to Genetically Modified Organisms (GMOs) within the current biotechnology background in Malaysia. Additionally, the paper suggests that the ambiguity of the provisions contained within the 2007 Act in governing such concerns, representing wider societal interests and welfare, in some ways might defeat the balancing role that this act was originally intended to fulfil.     

Takakura composting method for food wastes from small and medium industries with indigenous compost

Environmental Science and Pollution Research - The current work aimed to study the physical, chemical and biological properties of food wastes generated from small and medium industries by using...     

Key indicator tools for shallow slope failure assessment using soil chemical property signatures and soil colour variables

Slope failure has become a major concern in Malaysia due to the rapid development and urbanisation in the country. It poses severe threats to any highway construction industry, residential areas, natural resources and tourism activities. The extent of damages that resulted from this catastrophe can be lessened if a long-term early warning system to predict landslide prone areas is implemented. Thus, this study aims to characterise the relationship between Oxisols properties and soil colour variables to be manipulated as key indicators to forecast shallow slope failure. The concentration of each soil property in slope soil was evaluated from two different localities that consist of 120 soil samples from stable and unstable slopes located along the North-South Highway (PLUS) and East-West Highway (LPT). Analysis of variance established highly significant difference (P < 0.0001) between the locations, the total organic carbon (TOC), soil pH, cation exchange capacity (CEC), soil texture, soil chromaticity and all combinations of interactions. The overall CIELAB analysis leads to the conclusion that the CIELAB variables lightness L*, c* (Chroma) and h* (Hue) provide the most information about soil colour and other related soil properties. With regard to the relationship between colour variables and soil properties, the analysis detected that soil texture, organic carbon, iron oxide and aluminium concentration were the key factors that strongly correlate with soil colour variables at the studied area. Indicators that could be used to predict shallow slope failure were high value of L*(62), low values of c* (20) and h* (66), low concentration of iron (53 mg kg^?1) and aluminium oxide (37 mg kg^?1), low soil TOC (0.5%), low CEC (3.6 cmol/kg), slightly acidic soil pH (4.9), high amount of sand fraction (68%) and low amount of clay fraction (20%).