Identification of Mn-oxide minerals in some soils from Devon,UK, and their varying capacity to adsorb Co and Cu

A number of Mn-oxide minerals in soils from a farm in North Devon have been tentatively identified using a combination of advanced analytical techniques: scanning electron microscopy (SEM), scanning electron microprobe (SEMP), X-ray diffraction (XRD) and bulk chemical analysis by wet digestion followed by inductively-coupled plasma spectrometry (ICP). The minerals lithiophorite and hollandite are thought to occur throughout the study area although there is considerable geographical variation in the proportions of minerals present. Bimessite, vernadite, romanechite, todorokite and cryptomelane may also be present, although in smaller amounts. The use of SEMP, together with a simple sorption experiment, has allowed a study of the extent of uptake of Co and Cu by different Mn-oxide minerals. Lithiophorite appears to take up Co and Cu more effectively than hollandite within a pH range of 4–6.     

Gelatin embedding and diagnostic ultrasound in the examination of the fetal and neonatal brain

We describe a new method for the post-mortem examination of the fetal central nervous system. The brain is immobilized in gelatin prior to ultrasonic examination. Correlation with prenatal ultrasound is excellent and subsequent pathological examination is enhanced and facilitated.     

Occupational exposure to power frequency fields in some electrical transformation stations in Romania.

The aim of this study is to investigate the levels of electric and magnetic power frequency fields at 8 electrical transformation stations in the North-East counties of Romania and to check their compliance with standards. Spot measurements were carried out on both electric and magnetic fields under overhead conductors of 110-, 220- and 380-kV installations. The magnetic field levels were several orders of magnitude below the reference level for occupational exposure set by ICNIRP (International Commission on Non-Ionizing Radiation) or by Romanian regulations. In contrast, the electric field levels were about the same order of magnitude as the reference levels. In 2 electrical stations the reference level of 10 kV/m was exceeded at specific locations within the outdoor installations area. However, the additional reference level for short-time exposure included in Romanian regulations, 30 kV/m, was not exceeded.     

Who changes consumption following residential energy evaluations? local programs need all income groups to achieve kyoto targets

The government of Canada ratified the Kyoto Protocol on 17 December 2002, but over 100 Canadian municipalities had joined the International Council for Local Environmental Intitatives' (ICLEI) Cities for Climate Protection (CCP) campaign up to a decade earlier. A low-cost home energy rating system (HERS) evaluation and individualized energy plan was provided to 420 households in Kitchener, Ontario, from September 2000 to August 2001. To assess the impact of the energy efficiency program, natural gas consumption in the year prior to the evaluation was compared with that in the year following. Overall, a 5% reduction was achieved, but individual responses varied widely. Situational and psychological factors were evaluated for three groups of households: the conservers, the consumers and the steady middle group. Conservers (30% of households) had higher initial energy consumption levels and achieved two-thirds of the potential savings identified by the energy evaluation. Consumers (12% of households) had higher ownership rates of high-efficiency furnaces and water heaters and demonstrated the rebound effect of increased demand for energy services following the evaluation. Low-income groups were the most likely to behave as conservers (42%) while high-income groups were the least likely to be conservers (13%) and the most likely to be consumers. Local programs need to be inclusive of all income groups to increase participation and implementation rates by systematically reducing barriers (financial, knowledge, trust) or increasing incentives (financial, regulatory or social) if the desired goal (e.g. Kyoto target) is to be achieved.     

Using long-term data for a reintroduced population to empirically estimate future consequences of inbreeding

Inbreeding depression is an important long-term threat to reintroduced populations. However, the strength of inbreeding depression is difficult to estimate in wild populations because pedigree data are inevitably incomplete and because good data are needed on survival and reproduction. Predicting future population consequences is especially difficult because this also requires projecting future inbreeding levels and their impacts on long-term population dynamics, which are subject to many uncertainties. We illustrate how such projections can be derived through Bayesian state-space modeling methods based on a 26-year data set for North Island Robins (Petroica longipes) reintroduced to Tiritiri Matangi Island in 1992. We used pedigree data to model increases in the average inbreeding level (F ) over time based on kinship of possible breeding pairs and to estimate empirically N_e/N (effective/census population size). We used multiple imputation to model the unknown components of inbreeding coefficients, which allowed us to estimate effects of inbreeding on survival for all 1458 birds in the data set while modeling density dependence and environmental stochasticity. This modeling indicated that inbreeding reduced juvenile survival (1.83 lethal equivalents [SE 0.81]) and may have reduced subsequent adult survival (0.44 lethal equivalents [0.81]) but had no apparent effect on numbers of fledglings produced. Average inbreeding level increased to 0.10 (SE 0.001) as the population grew from 33 (0.3) to 160 (6) individuals over the 25 years, giving a ratio of 0.56 (0.01). Based on a model that also incorporated habitat regeneration, the population was projected to reach a maximum of 331–1144 birds (median 726) in 2130, then to begin a slow decline. Without inbreeding, the population would be expected stabilize at 887–1465 birds (median 1131). Such analysis, therefore, makes it possible to empirically derive the information needed for rational decisions about inbreeding management while accounting for multiple sources of uncertainty.     

Transport of simazine in unsaturated sandy soil and predictions of its leaching under hypothetical field conditions

The potential contamination of groundwater by herbicides is often controlled by processes in the vadose zone, through which herbicides travel before entering groundwater. In the vadose zone, both physical and chemical processes affect the fate and transport of herbicides, therefore it is important to represent these processes by mathematical models to predict contaminant movement. To simulate the movement of simazine, a herbicide commonly used in Chilean vineyards, batch and miscible displacement column experiments were performed on a disturbed sandy soil to quantify the primary parameters and processes of simazine transport. Chloride (Cl(-)) was used as a non-reactive tracer, and simazine as the reactive tracer. The Hydrus-1D model was used to estimate the parameters by inversion from the breakthrough curves of the columns and to evaluate the potential groundwater contamination in a sandy soil from the Casablanca Valley, Chile. The two-site, chemical non-equilibrium model was observed to best represent the experimental results of the miscible displacement experiments in laboratory soil columns. Predictions of transport under hypothetical field conditions using the same soil from the column experiments were made for 40 years by applying herbicide during the first 20 years, and then halting the application and considering different rates of groundwater recharge. For recharge rates smaller than 84 mm year(-1), the predicted concentration of simazine at a depth of 1 m is below the U.S. EPA's maximum contaminant levels (4 microg L(-1)). After eight years of application at a groundwater recharge rate of 180 mm year(-1) (approximately 50% of the annual rainfall), simazine was found to reach the groundwater (located at 1 m depth) at a higher concentration (more than 40 microg L(-1)) than the existing guidelines in the USA and Europe.     

Dual mechanochemical immobilization of heavy metals and decomposition of halogenated compounds in automobile shredder residue using a nano-sized metallic calcium reagent

Simultaneous immobilization of heavy metals and decomposition of halogenated organic compounds in different fractions of automobile shredder residue (ASR) were achieved with a nano-sized metallic calcium through a 60-min ball milling treatment. Heavy metal (HM) immobilization and chlorinated/brominated compound (CBC) decomposition efficiencies both reached 90–100 %, after ball milling with nanometallic calcium/calcium oxide (Ca/CaO) dispersion, regardless of ASR particle size (1.0, 0.45–1.0, and 0.250 mm). Concentrations of leachable HMs substantially decreased to a level lower than the regulatory standard limits (Co and Cd 0.3 mg L⁻¹; Cr 1.5 mg L⁻¹; Fe, Pb, and Zn 3.0 mg L⁻¹; Mn and Ni 1 mg L⁻¹) proposed by the Korean hazardous waste elution standard regulatory threshold. Scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) element maps/spectra showed that while the amounts of HMs and CBCs detectable in ASR significantly decreased, the calcium mass percentage increased. X-ray powder diffraction (XRD) patterns indicate that the main fraction of enclosed/bound materials on ASR includes Ca-associated crystalline complexes that remarkably inhibit HM desorption and simultaneously transform dangerous CBCs into harmless compounds. The use of a nanometallic Ca/CaO mixture in a mechanochemical process to treat hazardous ASR (dry conditions) is an innovative approach to remediate cross-contaminated residues with heavy metals and halogenated compounds.