Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

The Chemistry of Soils, Rocks and Plant Bioindicators in Three Ecosystems of the Holy Cross Mountains, Poland

In June of 2000, biogeochemical study was carried out in three ecosystems of the Holy Cross Mountains (south-central Poland). This paper presents element concentrations and stable sulfur (and in one site lead) isotope ratios in rocks, detailed soil profiles, and plant bioindicators including epiphytic lichen Hypogymnia physodes (L.) Nyl., mosses (Pleurozium schreberi (Brid.) Mitt., Hypnum cupressiforme Hedw. S. Str., Hylocomium splendens (Hedw.) B.S.G.), Scots pine (Pinus sylvestris L.), common birch (Betula pendula Roth.), aspen (Populus tremula L.) and English oak (Quercus robur L.). Chemical analyses were performed with ICP-AES and AAS methods in the accredited laboratory (Central Chemical Laboratory of the Polish Geological Institute in Warsaw). The principal objective of this study was to compare the chemical composition of rocks, soils and selected plant bioindicators between investigation sites using the same methods of sample collection, preparation and analyses. The results of this study have shown that there is a high variability in concentrations of elements in plant bioindicators from the same sites that can not be explained only by soil properties or anthropogenic influence. This conclusion indicates that for biomonitoring purposes (especially with vascular plants) we cannot neglect individual features of the species examined.     

Experimental research of oily sawdust air gasification

This article shows oily sawdust gasification research on countercurrent installation. Experimental research was on a laboratory scale. The main purpose of the experiment was combustible gas production with higher CH₄ concentration. Gas concentrations like CO, CO₂, CH₄, H₂, and C_nH_m determine syngas composition. The technological parameter’s value defines experimental conditions. Value of this was fuel to air ratio. With fuel to air ratio change, syngas composition was a differential phenomenon where it depended on the process parameters like temperature. Additionally, evaluation of methane formation from CO, H₂, and CO₂ was done. Methanization coefficients were based on CO and CO₂ hydrogenation reactions. Component’s activity was in analogs way to syngas components changed.

     

Two sampling strategies for an overview of pesticide contamination in an agriculture-extensive headwater stream

Two headwaters located in southwest France were monitored for 3 and 2 years (Auvézère and Aixette watershed, respectively) with two sampling strategies: grab and passive sampling with polar organic chemical integrative sampler (POCIS). These watersheds are rural and characterized by agricultural areas with similar breeding practices, except that the Auvézère watershed contains apple production for agricultural diversification and the downstream portion of the Aixette watershed is in a peri-urban area. The agricultural activities of both are extensive, i.e., with limited supply of fertilizer and pesticides. The sampling strategies used here give specific information: grab samples for higher pesticide content and POCIS for contamination background noise and number of compounds found. Agricultural catchments in small headwater streams are characterized by a background noise of pesticide contamination in the range of 20–70 ng/L, but there may also be transient and high-peak pesticide contamination (2000–3000 ng/L) caused by rain events, poor use of pesticides, and/or the small size of the water body. This study demonstrates that between two specific runoff events, contamination was low; hence the importance of passive sampler use. While the peak pesticide concentrations seen here are a toxicity risk for aquatic life, the pesticide background noise of single compounds do not pose obvious acute nor chronic risks; however, this study did not consider the risk from synergistic “cocktail” effects. Proper tools and sampling strategies may link watershed activities (agricultural, non-agricultural) to pesticides detected in the water, and data from both grab and passive samples can contribute to discussions on environmental effects in headwaters, an area of great importance for biodiversity.     

Potential impacts of climate change on agricultural land use suitability of the Hungarian counties

Central and Eastern European countries are a hotspot area when analyzing the impacts of climate change on agricultural and environmental sectors. This paper conducts a socio-economic evaluation of climate risks on crop production in Hungary, using panel data models. The region has a special location in the Carpathian basin, where the spatial distribution of precipitation varies highly from humid conditions in the western part to semiarid conditions in eastern Hungary. Under current conditions, crop systems are mainly rainfed, and water licences are massively underexploited. However, water stress projected by climate change scenarios could completely change this situation. In the near future (2021–2050), most of the crops examined could have better climatic conditions, while at the end of the century (2071–2100), lower yields are expected. Adaptation strategies must be based on an integrated evaluation which links economic and climatic aspects, and since the results show important differences in the case of individual systems, it is clear that the response has to be crop and region specific.     

Remobilization of polychlorinated biphenyls from sediment and its consequences for their transport in river waters

A laboratory experiment was performed to examine the remobilization of indicator polychlorinated biphenyls (iPCBs) from sediments and its results were applied to the real-world data for explaining the transport of PCBs in river. Seven PCB concentrations were determined in three series of model water–sediment systems (3 g of river sediment, three different volumes of distilled water (0.5, 0.25, and 0.15 ml), and 5 mg of biocide) after 11 days of incubation. Solid-phase extraction was used for separation of analytes from the aqueous phase and solvent extraction for isolation of analytes from the sediments, respectively. The extracts were analyzed for individual iPCB congeners using gas chromatography–mass spectrometry method. For each series of the experiment, the concentrations of PCBs in aqueous phase were similar. The average sediment/water partition coefficient value was 10⁴?l/kg. The solubility of individual PCB congeners in water did not influence the desorption of PCBs from the sediment. Although the dominant form of PCBs in a water–sediment system occurs as suspended and colloidal fractions, these compounds are transported mostly in a dissolved form. Suspended and colloidal matter is a major sink for PCBs in low-energy aquatic environments. In contrast, the dissolved PCBs are readily transported in running waters. The mobilization of PCBs from sediments to aqueous phase, with respect to their solubility in water, seems to be limited, thus reducing the risk of secondary pollution.     

Heterozygosity‐Fitness Correlations and Inbreeding Depression in Two Critically Endangered Mammals

The relation among inbreeding, heterozygosity, and fitness has been studied primarily among outbred populations, and little is known about these phenomena in endangered populations. Most researchers conclude that the relation between coefficient of inbreeding estimated from pedigrees and fitness traits (inbreeding‐fitness correlations) better reflects inbreeding depression than the relation between marker heterozygosity and fitness traits (heterozygosity‐fitness correlations). However, it has been suggested recently that heterozygosity‐fitness correlations should only be expected when inbreeding generates extensive identity disequilibrium (correlations in heterozygosity and homozygosity across loci throughout the genome). We tested this hypothesis in Mohor gazelle (Gazella dama mhorr) and Iberian lynx (Lynx pardinus). For Mohor gazelle, we calculated the inbreeding coefficient and measured heterozygosity at 17 microsatellite loci. For Iberian lynx, we measured heterozygosity at 36 microsatellite loci. In both species we estimated semen quality, a phenotypic trait directly related to fitness that is controlled by many loci and is affected by inbreeding depression. Both species showed evidence of extensive identity disequilibrium, and in both species heterozygosity was associated with semen quality. In the Iberian lynx the low proportion of normal sperm associated with low levels of heterozygosity was so extreme that it is likely to limit the fertility of males. In Mohor gazelle, although heterozygosity was associated with semen quality, inbreeding coefficient was not. This result suggests that when coefficient of inbreeding is calculated on the basis of a genealogy that begins after a long history of inbreeding, the coefficient of inbreeding fails to capture previous demographic information because it is a poor estimator of accumulated individual inbreeding. We conclude that among highly endangered species with extensive identity disequilibrium, examination of heterozygosity‐fitness correlations may be an effective way to detect inbreeding depression, whereas inbreeding‐fitness correlations may be poor indicators of inbreeding depression if the pedigree does not accurately reflect the history of inbreeding. Correlaciones Heterocigosidad‐ Adaptabilidad y Depresión Endogámica en Dos Especies de Mamíferos Críticamente en Peligro     

Seasonal distribution patterns of juvenile loggerhead sea turtles (<Emphasis Type="Italic">Caretta caretta</Emphasis>) following capture from a shipping channel in the Northwest Atlantic Ocean

Thirty-four juvenile loggerhead sea turtles captured by trawling from the Charleston, South Carolina (USA), shipping channel (32°42′N; −79°47′W) between May 2004 and August 2007 were tagged with satellite transmitters to assess the extent to which they remained near the capture location given their collection along a seasonal migratory corridor. Seventy-five percent of juveniles were classified as seasonal residents. Migrants predominantly swam north in the spring and nomads wandered south in the summer, but predictive indicators for non-resident status were not identified. All but one juvenile generally remained south of 34°N, within 40 km of shore, and in waters <30 m deep throughout the year. Nine of 14 loggerhead sea turtles monitored during the winter remained exclusively over the continental shelf, three briefly occurred in oceanic habitats, and two foraged extensively in oceanic habitats. Residents distributed >15 km from shore between spring and autumn were three times as likely to occur in oceanic habitats in winter. Modest seasonal movements contrasted with adults tagged at similar latitudes and with juveniles tagged further north and suggest distinct foraging groups within a regional foraging ground.