Novel synthesis blends between bacterial polyesters and acrylic rubber: A study on enzymatic biodegradation

The biodegradability of a multicomponent system based on biotechnological occurring polyester (poly(-hydroxybutyrate-co--hydroxyvalerate) (PHBV)) with inclusion of acrylate elastomer (polybutylacrylate) (PBA) was investigated. A bacterium which produced extracellular enzymes that degrades PHBV even when blended with PBA was isolated and tentatively designated asAureobacterium saperdae. It was observed, by morphological investigation, that, while the bacterial degradation was permitted for PBA content of 20% by weight, it was inhibited for PBA content of 30%, owing to the occurrence of a rubbery layer that prevents to the bacteria an easy accessibility in the PHBV-rich regions. In fact, owing the bacterial growth, only PHBV was metabolized, whereas no degradation of PBA was detected for blend samples. It was confirmed that the degradation proceeded via surface erosion of PHBV also in the blends. Finally, mechanical tests on PHBV/PBA specimens as a function of degradation extent have shown different behavior of the blends at different the PBA content. Thermal analysis of blends and PHBV has been reported, too     

Serum PAPP-A measurements in first-trimester screening for Down syndrome

Serum PAPP-A measurements taken from 254 women in the first trimester are reported. Eleven chromosomal abnormalities were detected. The mean serum PAPP-A levels in cases of Down syndrome were 0.44 MOM at 9 weeks gestation, 0.15 MOM at 10 weeks, and 0.29 MOM at 11 weeks. The PAPP-A level at 10 weeks was below those of pregnancies which aborted spontaneously. At 11 weeks, the pregnancies with Down syndrome recorded the lowest PAPP-A levels at that gestation. On this small sample, offering chorionic villus sampling to women with singleton pregnancies and a PAPP-A level below 0.3 MOM (approximately 6.5 per cent of this at-risk group) would have detected all the Down syndrome fetuses at 10 weeks and 50 per cent at 11 weeks without selecting those cases destined to abort. This suggests that serum PAPP-A should continue to be investigated as a potential first-trimester screening test for Down syndrome.     

Using corporate social responsibility benchmarking framework to identify and assess corporate social responsibility trends of real estate companies owning and developing shopping centres

Shopping centres that include retail activities have come in for criticism as to their environmental, architectural and social impacts. However, the sector has been applying corporate social responsibility (CSR) practices. In an attempt to identify the best practices regarding CSR and trends therein we developed a CSR benchmarking of companies from the real estate sector owning and developing shopping centres. Based on information from websites, annual, environmental and sustainability reports, and customer services department’s information, in 2004 and 2010, a comparative CSR benchmarking was performed on 23 real estate companies with shopping centres based in Europe, China, Australia and the USA. The CRS benchmarking framework focused on reported CSR practices and included categories and sub-categories of evaluation in four domains: (1) external results, (2) internal results, (3) management processes and (4) learning and innovation. The framework was inspired by the sustainability balanced scorecard structure. The United Kingdom real estate sector’s companies studied did relatively well when evaluated by the framework used in this study. The highest ranked real estate companies applied sustainable or environmental buildings standards and did show a commitment to transparency and CSR disclosure. The positive evolution of CSR practices in the 23 companies studied in 2004 and 2010 may reflect efforts to improve competitiveness and the reputation of the companies with shopping centres through CSR initiatives.     

The presence of vanadium in groundwater of southeastern extreme the pampean region Argentina Relationship with other chemical elements

Changes in the quality of groundwater resources are related to the presence and concentration of contaminants, especially trace elements such as arsenic, boron, fluoride and vanadium. Vanadium is a rare element naturally abundant, generally found in combination with other elements. Vanadium pentoxide is known to have aneugenic effects. Thus, a study was carried out to assess the presence of vanadium in the groundwater of the southeastern pampean region of Argentina, which constitutes the main water supply for the local population. Statistical and correlational analyses were applied to identify possible interrelationships between vanadium and another chemical elements. Vanadium was found in all groundwater samples. The minimum and maximum vanadium concentrations found were 0.05 mg/l and 2.47 mg/l, respectively. Vanadium is significantly correlated with other trace elements such as arsenic, fluoride and boron. The interrelationship between vanadium and the presence of volcanic glass in sediments is not significant as expected.     

Use of principal component analysis to profile temporal and spatial variations of chlorinated solvent concentration in groundwater

This work aims at evaluating spatial distribution patterns of concentration variations for chlorinated solvents in groundwater, based on principal component analysis and geographic information system (GIS) tools. The study investigates long-time series of chlorinated solvent concentrations in groundwater measured for 18 contaminated industrial sites. The characterization of contaminant plumes and delineation of pollutant sources are essential for choosing appropriate monitoring and remediation strategies, as contaminated groundwaters are characterized by complex patterns of spatial and temporal concentration variability, with wide unpredictable fluctuations over time. The present work describes the results of a new exploratory statistical method called the Variability Index Method (VIM) applied to environmental data to assess the performance of using concentration variations as molecular tracers to reveal aquifer dynamics, industrial impacts, and point sources for contamination plumes. The application of this method provides a useful assessment of controls over contaminant concentration variations as well as support for remediation techniques.     

High efficiencies in the electrochemical oxidation of an anthraquinonic dye with conductive-diamond anodes

Oxidation of anthraquinonic dye Acid Blue 62 by electrolysis with conductive-diamond electrodes is studied in this work. COD, TOC, and color have been selected to monitor the degradation of the molecule as a function of several operating inputs (current density, pH, temperature, and NaCl concentration). Results show that the electrochemical oxidation of this model of large molecules follows a first order kinetics in all the conditions assessed, and it does not depend on the pH and temperature. The occurrence of chloride ions in wastewaters increases the rate of color and COD removal as a consequence of the mediated oxidation promoted by the chlorinated oxidizing species. However, chloride occurrence does not have an influence on the mineralization rate. First-order kinetic-constants for color depletion (attack to chromophores groups), oxidation (COD removal), and mineralization (TOC removal) were found to depend on the current density and to increase significantly with its value. A single model was proposed to explain these changes in terms of the mediated oxidation processes. Rate of mineralization remained very close to that expected for a purely mass transfer-controlled process. This was explained assuming that mediated oxidation does not have a significant influence on the mineralization in spite it has some effect on intermediate oxidation stages. The efficiency of the oxidation was found to depend mainly on the concentration of COD being negligible the effect of the other inputs assessed except for the occurrence of chloride ions. Opposite, the efficiency of mineralization depends on concentration of TOC and current density and it did not depend on the chloride occurrence. This observation was found to have an important influence on the power required to remove a given percentage of the initial TOC or COD. To decrease COD efficiently, the occurrence of chloride in the solution is very important, while to remove TOC efficiently, it is more important to work at low current densities and chloride effect is negligible. Energy consumption could be decreased by folds using the proper conditions.     

Towards optimal sampling schedules for integral pumping tests

Ethanol use as a gasoline additive is increasing, as are the chances of groundwater contamination caused by gasoline releases involving ethanol. To evaluate the impact of ethanol on dissolved hydrocarbon plumes, a field test was performed in which three gasoline residual sources with different ethanol fractions (E0: no ethanol, E10: 10% ethanol and E95: 95% ethanol) were emplaced below the water table. Using the numerical model BIONAPL/3D, the mass discharge rates of benzene, toluene, ethylbenzene, xylenes, trimethylbenzenes and naphthalene were simulated and results compared to those obtained from sampling transects of multilevel samplers. It was shown that ethanol dissolved rapidly and migrated downgradient as a short slug. Mass discharge of the hydrocarbons from the E0 and E10 sources suggested similar first-order hydrocarbon decay rates, indicating that ethanol from E10 had no impact on hydrocarbon degradation. In contrast, the estimated hydrocarbon decay rates were significantly lower when the source was E95. For the E0 and E10 cases, the aquifer did not have enough oxygen to support complete mineralization of the hydrocarbon compounds to the extent suggested by the field-based mass discharge. Introducing a heterogeneous distribution of hydraulic conductivity did little to overcome this discrepancy. A better match between the numerical model and the field data was obtained assuming partial degradation of the hydrocarbons to intermediate compounds. Besides depending on the ethanol concentration, the impact of ethanol on hydrocarbon degradation appears to be highly dependent on the availability of electron acceptors.     

Nonparametric functional data estimation applied to ozone data: prediction and extreme value analysis

The study of extreme values and prediction of ozone data is an important topic of research when dealing with environmental problems. Classical extreme value theory is usually used in air-pollution studies. It consists in fitting a parametric generalised extreme value (GEV) distribution to a data set of extreme values, and using the estimated distribution to compute return levels and other quantities of interest. Here, we propose to estimate these values using nonparametric functional data methods. Functional data analysis is a relatively new statistical methodology that generally deals with data consisting of curves or multi-dimensional variables. In this paper, we use this technique, jointly with nonparametric curve estimation, to provide alternatives to the usual parametric statistical tools. The nonparametric estimators are applied to real samples of maximum ozone values obtained from several monitoring stations belonging to the Automatic Urban and Rural Network (AURN) in the UK. The results show that nonparametric estimators work satisfactorily, outperforming the behaviour of classical parametric estimators. Functional data analysis is also used to predict stratospheric ozone concentrations. We show an application, using the data set of mean monthly ozone concentrations in Arosa, Switzerland, and the results are compared with those obtained by classical time series (ARIMA) analysis.     

Hydraulic response and nitrogen retention in bioretention mesocosms with regulated outlets: part II--nitrogen retention

We observed dissolved nitrogen retention in vegetated bioretention mesocosms using different media with varying hydraulic conductivities. Elevated outlets were installed to regulate hydraulic response, with one treatment left free draining. The treatments (three replicates each) were loaded weekly with 50 cm of effluent averaging 2.47 mg/L nitrogen oxides (NOx) and 4.67 mg/L total nitrogen for 1 year. The NOx and total nitrogen retention by the outlet regulated treatments was significantly greater than the unregulated treatment. The systems then were dosed 6 times with 53 cm of synthetic stormwater averaging 0.77 mg/ L NOx and 1.46 mg/L total nitrogen, applied over 90 minutes. The outlet regulated treatment retained 68% NOx and 60% total nitrogen, while the corresponding free draining treatment retained 25% NOx and 27% total nitrogen. Over the following winter, the outlet regulated treatment retained 50% NOx and 73% total nitrogen, while the corresponding free draining treatment exported 17% more NOx, while retaining 50% total nitrogen.