Urbanisation-driven land degradation and socioeconomic challenges in peri-urban areas: Insights from Southern Europe

Climate change and landscape transformation have led to rapid expansion of peri-urban areas globally, representing new ‘laboratories’ for the study of human–nature relationships aiming at land degradation management. This paper contributes to the debate on human-driven land degradation processes by highlighting how natural and socioeconomic forces trigger soil depletion and environmental degradation in peri-urban areas. The aim was to classify and synthesise the interactions of urbanisation-driven factors with direct or indirect, on-site or off-site, and short-term or century-scale impacts on land degradation, focussing on Southern Europe as a paradigmatic case to address this issue. Assuming complex and multifaceted interactions among influencing factors, a relevant contribution to land degradation was shown to derive from socioeconomic drivers, the most important of which were population growth and urban sprawl. Viewing peri-urban areas as socio-environmental systems adapting to intense socioeconomic transformations, these factors were identified as forming complex environmental ‘syndromes’ driven by urbanisation. Based on this classification, we suggested three key measures to support future land management in Southern European peri-urban areas.     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

Evaluation of vehicular emissions reduction strategies using a novel hybrid method integrating BWM,Q methodology and ER approach

Environment, Development and Sustainability - Road transportation is the main source of greenhouse gas (GHG) emissions in Iran. Different road transport emissions reduction strategies (RTERS) can...     

Preparation and investigation of poly(methylmethacrylate) nano-capsules containing haloxyfop-R-methyl and their release behavior

Abstract

In this study, the preparation and characterization of haloxyfop-R-methyl herbicide loaded in poly(methylmethacrylate) (PMMA) nano-capsules by emulsion polymerization and its release behavior were investigated. The chemical characterizations of PMMA/haloxyfop-R-methyl nano-capsules were confirmed by FT-IR spectroscopy method, and the surface morphology was studied by field emission scanning electron microscopy and transmission electron microscopy. Also, the herbicide loading and encapsulation efficiency were analyzed for the herbicide-loaded nano-capsules. The release rate of PMMA/haloxyfop-R-methyl nano-capsules was determined by UV-visible spectroscopy. The thermal properties and thermal stability of nano-capsules were explored by the thermal gravimetric analysis method. The diameter of the nano-capsules was in the range of 100–300?nm. Increasing the amount of herbicide in nano-formulations significantly affected the surface of the nano-capsules and reduced their surface smoothness. Triton-X100 was identified as the best surfactant for the preparation of nano-capsules, and the sample containing the lowest herbicide content showed the best performance in terms of encapsulation and loading efficiency. This sample showed a steady-state release rate during the six days.     

Upper trapezius fatigue in carpet weaving: the impact of a repetitive task cycle

Introduction. Shoulder disorders are one of the most prevalent musculoskeletal disorders among carpet weavers. The most important cause of these disorders is muscle fatigue. The aim of the present study is to investigate the effect of carpet weaving characteristics on upper trapezius (UTr) muscle fatigue during a task cycle. Method. In this cross-sectional study, 9 women and 3 men participated. During an 80-min cycle of carpet weaving, a times-series model was applied to assess electromyography amplitude and frequency changes. Result. According to the joint analysis of electromyogram spectrum and amplitude method, the participants experienced 0% force decrease, 0.9% recovery, 18% force increase and 72% fatigue in the left UTr. Furthermore, the rates of force decrease, recovery, force increase and fatigue in the right UTr were 18%, 18%, 18% and 45%, respectively. Fatigue in the right and the left UTr was reported to be the dominant state during one carpet weaving task cycle. Conclusion. Task cycle appears to have a significant impact on UTr fatigue in participants, and UTr fatigue can be considered a serious risk factor in shoulder musculoskeletal disorders. Hence, further studies should focus on better workstations and work–rest periods during various subtasks.     

Magnetic Cr(VI) Ion Imprinted Polymer for the Fast Selective Adsorption of Cr(VI) from Aqueous Solution

In this study, a novel magnetic Cr(VI) ion imprinted polymer (Cr(VI)-MIIP) was successfully synthesized and used as a selective sorbent for the adsorption of Cr(VI) ions from aqueous solution. It can be synthesized through the combination of an imprinting polymer and magnetic nanoparticles. The high selectivity achieved using MIIP is due to the specific recognition cavities for Cr(VI) ions created in Cr(VI)-MIIP. Also, the magnetic properties that could be obtained using magnetic nanoparticles, helps to separate adsorbent with an external magnetic field without either additional centrifugation or filtration procedures. The magnetic Fe₃O₄ nanoparticles (MNPs) were synthesized using an improved co-precipitation method and modified with tetraethylorthosilicate (TEOS) before imprinting. The magnetic Cr(VI) ion imprinted polymer was prepared through precipitation copolymerization of 4-vinylpyridine as the complexing monomer, 2-hydroxyethyl methacrylate as a co-monomer, the Cr⁶⁺ anion as a template, and ethylene glycol dimethacrylate (EGDMA) as a cross-linker in the presence of modified magnetite nanoparticles. This novel synthesized sorbent was characterized using different techniques. Batch adsorption experiments were performed to evaluate the adsorption conditions, selectivity, and reusability. The results showed that the maximum adsorption capacity was 39.3 mg g^?1, which was observed at pH 3 and at 25?°C. The equilibrium time was 20 min, and the amount of adsorbent which gave the maximum adsorption capacity was 1.7 g L^?1. Isotherm studies showed that the adsorption equilibrium data were fitted well with the Langmuir adsorption isotherm model and the theoretical maximum adsorption capacity was 44.86 mg g^?1. The selectivity studies indicated that the synthesized sorbent had a high single selectivity sorption for the Cr(VI) ions in the presence of competing ions. Thermodynamic studies revealed that the adsorption process was exothermic (\(\Delta H\)?<?0) and spontaneous (\(\Delta G\)?<?0). In addition, the spent MIIP can be regenerated up to five cycles without a significant decrease in adsorption capacity.     

The effect of biochar on severity of soil water repellency of crude oil-contaminated soil

Environmental Science and Pollution Research - Crude oil contamination adversely affects soil water repellency. In this study the effect of biochar on this soil characteristic has been investigated...     

Evaluation of the potential of Sasobit® to reduce required heat energy and CO2 emission in the asphalt industry

Warm-mix asphalt (WMA) has been gaining popularity in the asphalt industry primarily because of its ability to lower the energy required to blend asphalt mixes, which in turn results in less fuel consumption, slower aging of the asphalt binder and reduced emission of greenhouse gases. This paper evaluates the effects of different quantities of a WMA additive known as Sasobit^® on the required heat energy and the amount of CO₂ produced to increase the temperature of two aggregates from three sources and one binder from 25 °C to the point of mixing. The results showed that incorporating 1% Sasobit^® can potentially reduce the required heat energy and amount of CO₂ produced by 2.8% and 3.0%, respectively, for all aggregate types and sources investigated. The paper also presented design charts that enable energy policy makers and engineers to select the appropriate Sasobit^® content to produce the most cost effective asphalt mixture with less environmental impact. The design charts show that 1.6% Sasobit^® content is the most suitable proportion to be blended into the asphalt binder without compromising pavement resistance against fatigue failure. Two similar aggregates from different sources may exhibit similar specific gravities, but their specific heat capacities can vary widely. These differences have a significant effect on the required heat energy, asphalt production cost and the amount of emissions released into the environment.