蔬菜作物施用耐氨固氮菌的增产效果

研究在小区试验条件下,施用耐氨固氮型的催娩克氏菌和阴沟肠杆菌混合菌剂对蔬菜生长和产量的影响。结果表明,施用耐氨固氮菌可促进蔬菜生长,提高产量并改善品质,供试蔬菜的平均增产率达20％,增产效果明显。     

广东省主要土类的三卤甲烷生成潜能(THMFP)

通过振荡浸出实验,测定了广东省几种主要土类的三卤甲烷生成潜能(THMFP),比较了土壤浸提液中溶解态(可过滤态)有机物与悬浮态(不可过滤态)有机物在形成三卤甲烷(THMs)中的作用,并对影响土壤THMFP的各种因素进行讨论结果表明:①各主要土类表层土中,未过滤浸提液的整体THMFP(b-THMFP)含量范围为:0.7～36.8μg/g土,中值为10.6μg/g土;过滤浸提液的THMFP(指可溶性有机物的THMFP,即d-THMFP)含量范围为:0.5～21.2μg/g土,中值为3.9μg/g土;其中,19号石灰土的b-THMFP和d-THMFP最高,20号紫色土的b-THMFP最低,5号赤红壤的d-THMFP最低.②总体上,悬浮态有机物对THMs生成量有较大的正贡献.③影响土壤THMFP的因素主要是有机质含量、各种氧化物含量、土壤发生层次、植被等.     

双酚A促进粪肠球菌中信息素调控质粒pCF10介导的耐药基因接合转移

粪肠球菌是一种在自然水体中广泛存在的革兰氏阳性细菌。信息素调控质粒介导的接合转移是造成粪肠球菌耐药基因快速扩散的重要方式。双酚A是一种内分泌干扰物,因其在工业中大量应用造成其在水环境中的广泛分布。本文以信息素调控质粒中比较有代表性的pCF10质粒作为研究对象,研究了双酚A对粪肠球菌中耐药基因接合转移的影响,证实了双酚A可以促进pCF10质粒介导的耐药基因接合转移,且这一结果同双酚A作用浓度和作用时间相关。双酚A影响耐药基因的扩散,是通过促进编码正调控信息素的ccfA基因表达实现的。本文旨在深入理解双酚A影响抗生素抗性基因扩散的环境行为,为耐药基因控制及双酚A环境效应的评估提供理论支持。     

高效氨氧化菌群富集、驯化及其动态变化规律分析

利用选择性培养基对氨氧化菌群进行了连续驯化,得到了氨氮去除效率稳定的氨氧化菌群。采用平板菌落计数法结合聚合酶链式反应-变性梯度凝胶电泳(PCR-DGGE)技术考察了氨氧化菌群在连续传代过程中数量及群落结构的动态变化,并考察了pH值、碳源(HCO3-)浓度和氨氮浓度等因素对氨氧化菌群去除氨氮效率的影响。结果表明,通过连续驯化,氨氧化菌的比例由最初的1.8%提高到了31.3%。在碳源浓度为1.5 mg/L,NH4+-N初始浓度为200 mg/L,pH值为8的条件下,菌群对氨氮的去除率达99%以上。     

O3-H2O2氧化法处理印染废水

采用O₃-H₂O₂氧化法对印染废水进行氧化处理,比较了O₃氧化法和O₃-H₂O₂氧化法对印染废水的处理效果,考察了初始废水pH、H₂O₂加入量、O₃流量和反应时间对废水的色度去除率和COD去除率的影响。实验结果表明：O₃-H₂O₂氧化法对废水的COD和色度的去除效果比O₃氧化法更好;在初始废水pH为11、H₂O₂加入量为13mmol/L、O₃流量为6g/h、反应时间为60min的最佳工艺条件下,处理后废水COD为61.50mg/L,COD去除率为95.73%,废水色度为5倍,色度去除率为99.75%,TOC为37.84mg/L,TOC去除率为85.10%,BOD₅为22.76mg/L,BOD₅去除率为90.20%,BOD₅/COD为0.37。     

金荞麦药理作用研究进展

金荞麦能抗菌消炎、抑制肿瘤,同时还可以增强巨噬细胞的吞噬功能,提高机体的免疫能力;药理实验证明金荞麦还具有降脂降糖、祛痰镇咳和抑制血小板聚集等作用.参36.     

污水处理一体化装置的研究现状与展望

污水处理一体化装置具有投资省、占地少、能耗低、处理效果好及管理简便等优点,是现代污水处理的新方向,有着广阔的应用前景。本文结合几种典型的污水处理工艺对污水处理一体化装置进行了概括性的介绍与展望。     

Chemical characteristics of fine particulate matters measured during severe winter haze events in Ulaanbaatar,Mongolia

In order to investigate the chemical characteristics of atmospheric aerosol measured during a severe winter haze event, 12-hr PM_2.5 (particulate matter with an aerodynamic diameter ≤2.5 μm) samples were collected at an urban site in Ulaanbaatar, Mongolia, from January 9 to February 17, 2008. On average, 12-hr PM_2.5 mass concentration was 105.1 ± 34.9 μg/m³. Low PM_2.5 mass concentrations were measured when low pressure developed over central Mongolia. The 12-hr average organic mass by carbon (OMC) varied from 6.4 to 132.3 μg/m³, with a mean of 54.9 ± 25.4 μg/m³, whereas elemental carbon (EC) concentration ranged from 0.1 to 3.6 μgC/m³, with a mean of 1.5 ± 0.8 μgC/m³. Ammonium sulfate was found to be the most abundant water-soluble ionic component in Ulaanbaatar during the sampling period, with an average concentration of 11.3 ± 5.0 μg/m³. In order to characterize the effect of air mass pathway on fine particulate matter characteristics, 5-day back-trajectory analysis was conducted, using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. The haze level was classified into three categories, based on the 5-day air mass back trajectories, as Stagnant (ST), Continental (CT), and Low Pressure (LP) cases. PM_2.5 mass concentration during the Stagnant condition was approximately 2.5 times higher than that during the Low Pressure condition, mainly due to increased pollutant concentration of OMC and secondary ammonium sulfate.

Implications: Mongolia is experiencing rapid rates of urbanization similar to other Asian countries, resulting in air pollution problems by the growing number of automobiles and industrialization. Ulaanbaatar, capital of Mongolia, is inherently vulnerable to air pollution because of its emission sources, topography, and meteorological characteristics. Very limited measurements on chemical characteristics of particulate matter have been carried out in Ulaanbaatar, Mongolia.     

Effect of amorphous silica and silica sand on removal of chromium(VI) by zero-valent iron

The effect of two surfaces (amorphous silica and silica sand) on the reduction of chromium(VI) by zero-valent iron (Fe(0)) was investigated using batch reactors. The amendment of both surfaces significantly increased the rate and extent of Cr(VI) removal. The rate enhancement by amended surfaces is presumed to result from scavenging of Fe(0)-Cr(VI) reaction products by the provided surfaces, which minimized surface deactivation of Fe(0). The rate enhancing effect was greater for silica compared to sand, and the difference is attributed to silica's higher surface area, greater affinity for reaction products and pH buffering effect. For a given mass of Fe(0), the reactivity and longevity of Fe(0) to treat Cr(VI) increased with increasing dose of silica. Elemental analyses of the reacted iron and silica revealed that chromium removed from the solution was associated with both surfaces, with its mass distribution being approximately 1:1 per mass of iron and silica. The overall result suggests reductive precipitation was a predominant Cr(VI) removal pathway, which involves initial reduction of Cr(VI) to Cr(III), followed by formation of Cr(III)/Fe(III) hydroxides precipitates.