Genotoxicity assessment of acute exposure of chlorpyrifos to freshwater fish Channa punctatus (Bloch) using micronucleus assay and alkaline single-cell gel electrophoresis

Chlorpyrifos (O,O-diethyl O-3,5,6-trichloro-2-pyridylphosphorothioate) is one of the organophosphate pesticides widely used in agricultural practices throughout world and irreversible inhibitor of cholinesterase in all animal species. Limited efforts have been made to study acute genotoxic effects of chlorpyrifos (CPF) in different tissues of fish using genotoxic biomarkers. Therefore, the present investigation was aimed to study the induction of DNA damage by CPF in freshwater teleost fish Channapunctatus using micronucleus assay (MN assay) and alkaline single-cell gel electrophoresis (comet assay). The value of LC(50) - 96 h of CPF was determined as 811.98 microgl(-1) for C. punctatus, in a semi-static system and on the basis of LC(50) value three acute concentrations viz., 203, 406 and 609 microgl(-1) were determined. The fishes were exposed to the different concentrations of CPF for 96 h and samplings were done at regular intervals for assessment of the MN frequencies and DNA damage. In general, significant effects (P<0.01) from both concentrations and time of exposure were observed in exposed fishes. It was found that the micronucleus induction was highest on 96 h at all concentrations in the peripheral blood. Similar trend was observed for the DNA damage measured in terms of the percentage of tail DNA in the lymphocyte and gill cells. This study explored the combined use of micronucleus assay and comet assay for in vivo laboratory studies using fresh water fish for screening the genotoxic potential of xenobiotics.     

Informal e-waste recycling: environmental risk assessment of heavy metal contamination in Mandoli industrial area,Delhi, India

Nowadays, e-waste is a major source of environmental problems and opportunities due to presence of hazardous elements and precious metals. This study was aimed to evaluate the pollution risk of heavy metal contamination by informal recycling of e-waste. Environmental risk assessment was determined using multivariate statistical analysis, index of geoaccumulation, enrichment factor, contamination factor, degree of contamination and pollution load index by analysing heavy metals in surface soils, plants and groundwater samples collected from and around informal recycling workshops in Mandoli industrial area, Delhi, India. Concentrations of heavy metals like As (17.08 mg/kg), Cd (1.29 mg/kg), Cu (115.50 mg/kg), Pb (2,645.31 mg/kg), Se (12.67 mg/kg) and Zn (776.84 mg/kg) were higher in surface soils of e-waste recycling areas compared to those in reference site. Level exceeded the values suggested by the US Environmental Protection Agency (EPA). High accumulations of heavy metals were also observed in the native plant samples (Cynodon dactylon) of e-waste recycling areas. The groundwater samples collected form recycling area had high heavy metal concentrations as compared to permissible limit of Indian Standards and maximum allowable limit of WHO guidelines for drinking water. Multivariate analysis and risk assessment studies based on total metal content explains the clear-cut differences among sampling sites and a strong evidence of heavy metal pollution because of informal recycling of e-waste. This study put forward that prolonged informal recycling of e-waste may accumulate high concentration of heavy metals in surface soils, plants and groundwater, which will be a matter of concern for both environmental and occupational hazards. This warrants an immediate need of remedial measures to reduce the heavy metal contamination of e-waste recycling sites.     

Role of microbes,metabolites and effector compounds in host–microbiota interaction: a pharmacological outlook

Environmental Chemistry Letters - Microbial cells react with intestinal surfaces and produce enzymes and metabolites that influence&nbsp;human health, host metabolism and immunity. Gut...     

Generation pattern of sulfur containing gases from anaerobically digested sludge cakes.

Eleven dewatered sludge cakes collected from anaerobic digesters at different treatment plants were evaluated for the amount, type, and pattern of odorous gas production. All but one of the sludge cakes were from mesophilic anaerobic digesters. One was from a thermophilic digester. The pattern and quantities of sulfur gases were found to be unique for each of the samples with regard to the products produced, magnitude, and subsequent decline. The main odor-causing chemicals were volatile sulfur compounds, which included hydrogen sulfide, methanethiol, and dimethyl sulfide. Volatile sulfur compound production peaked in 3 to 8 days and then declined. The decline was a result of conversion of organic sulfur compounds to sulfide. In one side-by-side test, a high-solids centrifuge cake generated more odorous compounds than the low-solids centrifuge cake. The data show that anaerobic digestion does not eliminate the odor potential of anaerobically digested dewatered cakes.     

Fluoride distribution in groundwater and survey of dental fluorosis among school children in the villages of the Jhajjar District of Haryana,India

Fluoride concentration of groundwater reserves occurs in many places in the world. A critical area for such contamination in India is alluvial soil of the plain region, consisting of five blocks (Jhajjar, Bahadurgarh, Beri, Matanhail, and Sahalawas) of the Jhajjar District adjacent to the National Capital Territory of India, New Delhi. The purpose of this study was to assess the association between water fluoride levels and prevalence of dental fluorosis among school children of the Jhajjar District of Haryana, India. The fluoride content in underground drinking water sources was found to vary in villages. Hence, the villages were categorized as high-fluoride villages (1.52–4.0 mg F/l) and low/normal-fluoride villages (0.30–1.0 mg F/l). The source of dental fluorosis data was school-going children (7–15 years) showing different stages and types of fluorosis who were permanent resident of these villages. The fraction of dental fluorosis-affected children varied from 30% to 94.85% in the high-fluoride villages and from 8.80% to 28.20% in the low/normal-fluoride villages. The results of the present study revealed that there existed a significant positive correlation between fluoride concentration in drinking water and dental fluorosis in high-fluoride villages (r = 0.508; p < 0.001) and insignificant correlation in low-fluoride villages.     

Evaluation of membrane bioreactor process capabilities to meet stringent effluent nutrient discharge requirements.

A six-stage membrane bioreactor (MBR) pilot plant was operated to determine and demonstrate the capability of this process to produce a low-nutrient effluent, consistent with the nutrient reduction goals for the Chesapeake Bay. Biological nitrogen removal was accomplished using a multistage configuration with an initial anoxic zone (using the carbon in the influent wastewater), an aerobic zone (where nitrification occurred), a downstream anoxic zone (where methanol was added as a carbon source), and the aerated submerged membrane zone. The capability to reliably reduce effluent total nitrogen to less than 3 mg/L as nitrogen (N) was demonstrated. A combination of biological (using an initial anaerobic zone) and chemical (using alum) phosphorus removal was used to achieve effluent total phosphate concentrations reliably less than 0.1 mg/L as phosphorus (P) and as low as 0.03 mg/L as P. Alum addition also appeared to enhance the filtration characteristics of the MBR sludge and to reduce membrane fouling. Aeration of the submerged membranes results in thickened sludge with a high dissolved oxygen concentration (approaching saturation), which can be recycled to the main aeration zone rather than to an anoxic or anaerobic zone to optimize biological nutrient removal. Biological nutrient removal was characterized using the International Water Association Activated Sludge Model No. 2d. The stoichiometry of chemical phosphorus removal was also consistent with conventional theory and experience. The characteristics of the solids produced in the MBR were compared with those of a parallel full-scale conventional biological nitrogen removal process and were generally found to be similar. These results provide valuable insight to the design and operating characteristics of MBRs intended to produce effluents with very low nutrient concentrations.     

Status and Environmental Impact of Emissions from Thermal Power Plants in India

The main emissions from coal combustion at thermal power plants are carbon dioxide (CO₂), nitrogen oxides, sulfur oxides, chlorofluorocarbons (CFCs), and airborne inorganic particles such as fly ash and soot; CO₂, methane, and CFCs are greenhouse gases. These emissions are considered to be partially responsible for harmful global climate change. This review summarizes the status of thermal power plants in India and their various types of emissions that directly or indirectly produce harmful effects on the environment and human health. Moreover, it focuses on various types of preventive measures used to avoid/minimize emissions.     

Volatile Organic Compounds in Ambient Air at Four Residential Locations in Seoul, Korea

To investigate the environmental behavior of volatile organic compounds (VOCs) in urban areas, their concentrations were measured at four urban monitoring sites (namely, N, S, E, and W) in Seoul, Korea (February to December 2009). A total of 27 compounds were quantified that consist of four chemical groups: aromatic (AR), halogenated aromatic, halogenated paraffin, and halogenated olefin. Results were evaluated by focusing on these four functional groups just mentioned and their summation term as total VOC (TVOC) along with several individual species (mainly AR species, that is, benzene, toluene, ethylbenzene, and xylene). The highest concentration of chemical groups was found from AR (71.1±42.1?ppbC), while that for individual species confirmed the dominance of toluene (7.48±3.88?ppb). The analysis of spatial distribution indicated that high TVOC levels were recorded at sites N and W, while it was not so significant such as S and E in terms of TVOC budget. Seasonal variation of these VOCs was characterized by the peak values in December to reflect the combined effects of pronounced source activities and meteorological conditions. Analysis of spatial variations in VOC levels between the four urban sites indicated that their distributions are tightly affected by local source processes in each area.     

Diagnosis and Repair of Excessively Emitting Vehicles

Abstract

Between 1991 and 1993, the California Air Resources Board (CARB) selected 1,115 vehicles from all across the South Coast Air Basin to evaluate the effectiveness of the state's existing biennial motor vehicle Inspection/Maintenance (I/M) or Smog Check program. The vehicles were chosen to represent the population of cars that "should fail" properly conducted inspections. The cars were emissions-tested at baseline and sent undercover to licensed I/M garages throughout the basin. Federal Test Procedure (FIT) emissions were measured again for cars that were repaired. In the second year of the study, the vehicles that could be reproduced were tested at the CARB to measure the level of emissions deterioration and any underhood changes in emission control systems. In the third year, the cycle of emissions testing and undercover inspections and repair was repeated.

This paper uses data from the study to explore the relationships between super emitting vehicles (defined here as vehicles whose emissions are several times California certification standards) and diagnostics and repair of their underhood emissions control systems. Also examined is their appearance and improvement during a three-year period that includes two cycles of inspection and repair. An important finding is that once normalized to account for differences in certification standards, the super emitting vehicles do not have a unique signature in terms of their underhood emission control system failure modes, mileage, or age, when compared with the average vehicle expected to fail a Smog Check inspection. However, they are more likely to be identified, diagnosed, and repaired effectively than other vehicles, although they continue to reappear over time.     

The effect of digestion and dewatering on sudden increases and regrowth of indicator bacteria after dewatering

Several investigators have reported higher densities of indicator bacteria after dewatering of anaerobically digested biosolids. The increases appear to occur at two points in the biosolids process: the first, referred to as "sudden increase", occurs immediately after dewatering; the second, "regrowth", occurs during storage over longer periods. The objectives of this study were to examine the effect of digestion and dewatering processes on sudden increase and regrowth of fecal coliform and E. coli. Samples were collected from five thermophilic and five mesophilic digestion processes, with either centrifuge or belt filter press dewatering. Sudden increase typically was observed in the thermophilic processes with centrifuge dewatering and was not observed in the mesophilic processes with either centrifuge or belt filter press dewatering. Regrowth was observed in both thermophilic and mesophilic processes with centrifuge dewatering but not belt filter press dewatering.