灰色协调度模型在产业用水系统分析中的应用

揭示产业用水系统的时空动态发展规律，探讨其内部的协调关系，是开展节水型社会建设规划，实现水资源可持续利用的关键。然而，目前对产业用水系统的协调性分析还缺乏较为有效的理论和方法。以往在利用协调度模型进行用水系统有序度研究时，通常采用两段叙述的线性分段函数表示，较不适用于描述产业用水系统内部要素的非线性结构。因此，针对产业用水系统的特性，利用灰关联原理建立有序度函数，以建立更适于用水系统分析的灰色协调度模型。利用该模型对上海市1997~2005年产业用水系统进行实证研究，结果显示：上海市产业用水系统基本有序，发展比较协调，其用水综合效益较大，但距离最优状态尚有潜力可挖；其中，农业用水子系统的发展较为欠缺，在未来用水规划中应予以重视。     

电感耦合等离子体质谱法在环境监测中的应用

针对ICP-MS技术的使用特点及其近年来在环境监测领域的应用进行综合阐述，并对ICP-MS技术的发展前景作出简单的评述。     

典型西南工业城市柳州市核心区大气污染物时空分布与气象因素研究

为研究柳州市核心区大气污染物浓度时空变化规律与气象因素之间的关系,统计分析了2018年全年研究区内6个自动监测站点PM_(2.5)、PM_(10)、SO_2、NO_2、O_3和CO的浓度监测数据和气象站气象数据,并对28次超标日污染物来源进行了解析.结果显示:①核心区颗粒污染物污染较为严重,且以PM_(2.5)为主的细颗粒污染物仍为柳州市主要的大气污染物;各污染物月均浓度季节差异显著,除NO_2外柳州大气污染物浓度下降明显,指示柳州市多项节能减排综合整治措施成效显著;PM_(2.5)、PM_(10)、CO受早晚高峰期影响,浓度日变化均呈双峰型;NO_2在不同季节峰型不同,作为O_3前体物其浓度日变化与O_3相反,呈现"早峰午谷"的变化趋势.②通过对污染物浓度插值发现,由于核心区主要工商业区位于西部且处于主导风向下风向,故PM_(2.5)和SO_2浓度西北高、东南低,PM_(10)、NO_2和CO浓度西南高、东北低;核心区东部的山区为O_3生成带来大量前体物,使O_3浓度东南高、西北低.③由于气候特征,核心区春、夏季主要气象因素均为降水量;秋季的主要气象因素是风速,风速与污染物的负相关关系表明了风的扩散效应;冬季大部分污染物与气象因素的相关性不显著,表明人为因素对污染物的影响大于气象因素;核心区大气污染物主要来源于局地排放和区域传输,且南北主导风向对大气污染影响最大.④HYSPLIT模型结果指示柳州超标日大气污染物主要来自于珠三角地区,且陆源颗粒物浓度普遍比海洋源高,来自南部的远距离输送气流颗粒物含量最低,表明远距离输送为影响颗粒物传播的主要原因.     

沱江沉积物中有机氯农药分布特征及其与藻类有机质的关系和生态风险评估

使用气相色谱-质谱联用仪分析了长江支流沱江流域48个表层沉积物中有机氯农药（organochlorine pesticides,OCPs）的残留水平,探讨了其分布和组成特征及其与总有机碳（total organic carbon,TOC）、藻类有机质之间的关系,以及评估其生态风险.结果表明沱江流域表层沉积物中OCPs的总含量为3.17~127 ng·g^-1,其中六六六（hexachlorocyclohexane,HCHs）类农药的含量为2.83~86.0 ng·g^-1,滴滴涕（dichlorodiphenyltrichloroethane,DDTs）类农药的含量为0.340~40.9 ng·g^-1.OCPs空间分布特点为：上游 < 中游 < 下游 < 支流.HCHs和DDTs的组成成分分析表明,沱江流域存在林丹输入的现象,主要来自于历史残留,这与绝大多数流域的DDTs的输入状况相似.OCPs含量与TOC、藻类有机质含量之间存在着极显著的正相关性关系,表明藻类有机质在TOC对沉积物中的OCPs分配中起更为重要的作用.生态风险评估表明,沱江流域表层沉积物的有机氯农药存在较大的生态风险,可能对河流的底栖生物及生态环境造成明显的影响.     

中国菌糠露天焚烧污染物排放时空分布特征

基于我国2000~2017年食用菌年产量数据,采用排放因子法估算了菌糠露天焚烧的污染物排放量,利用Mann-Kendall法和聚类分析法分析了排放量的时空分布特征,使用回归分析法预测了污染物的排放趋势.结果表明：（1）2000~2017年全国菌糠露天焚烧污染物排放量持续上升,PM_2.5、CO₂、CO、CH₄、NMVOCs、PAHs、NO_x、SO₂累积排放量分别为1.40×10⁶,3.48×10⁸,1.99×10⁷,8.43×10⁵,2.08×10⁶,3.00×10⁴,6.34×10⁵,8.29×10⁴t;（2）污染物排放量较高的省区包括山东、黑龙江、浙江、湖南、江苏、福建和河南,排放量较低的省区包括贵州、宁夏、天津、北京、新疆、重庆、甘肃;（3）预计2021年菌糠焚烧污染物总排放量高达4.25×10⁷t,其对生物质焚烧污染物总排放量的贡献率约为19.82%.我国菌糠露天焚烧污染物排放规模较大,应予以重点关注.     

岩溶地下河污染物运移模型对比研究

两区模型（TRM）和暂时存储模型（TSM）为两种常用的岩溶地下河（管道）污染物运移模型,为了更好表征岩溶地下河污染物运移过程,开展模型对比研究.采用两种模型拟合室内管道示踪实验穿透曲线,从概念模型框架、模型优缺点、参数校正过程和物理意义、参数敏感性等方面对比分析两种模型的异同.结果表明,OTIS软件提供TSM的数值解,而CXTFIT软件提供TRM的解析解,但两者均能通过下游不同位置的穿透曲线分段表征地下河不同阶段的污染物运移过程.两种模型的物理意义相近,均可近似描述岩溶地下河中溶质的暂时性存储现象,较好地拟合溶质运移曲线.采用TSM可校正得到暂时存储区的横截面积,但采用TRM只能获得非流动区所占的比例.两种模型中弥散系数和传质/交换系数的敏感度较低,并且弥散系数的变化对穿透曲线拖尾无显著影响.研究结果为岩溶地下河污染物运移模型的选取与应用提供了依据.     

Revealing the changes of bacterial community from water source to consumers tap: A full-scale investigation in eastern city of China

This study profiled the bacterial community variations of water from four water treatment systems, including coagulation, sedimentation, sand filtration, ozonation-biological activated carbon filtration (O₃-BAC), disinfection, and the tap water after the distribution process in eastern China. The results showed that different water treatment processes affected the bacterial community structure in different ways. The traditional treatment processes, including coagulation, sedimentation and sand filtration, reduced the total bacterial count, while they had little effect on the bacterial community structure in the treated water (before disinfection). Compared to the traditional treatment process, O₃-BAC reduced the relative abundance of Sphingomonas in the finished water. In addition, ozonation may play a role in reducing the relative abundance of Mycobacterium. NaClO and ClO₂ had different effects on the bacterial community in the finished water. The relative abundance of some bacteria (e.g. Flavobacterium, Phreatobacter and Porphyrobacter) increased in the finished water after ClO₂ disinfection. The relative abundance of Mycobacterium and Legionella, which have been widely reported as waterborne opportunistic pathogens, increased after NaClO disinfection. In addition, some microorganisms proliferated and grew in the distribution system, which could lead to turbidity increases in the tap water. Compared to those in the finished water, the relative abundance of Sphingomonas, Hyphomicrobium, Phreatobacter, Rheinheimera, Pseudomonas and Acinetobacter increased in the tap water disinfected with NaClO, while the relative abundance of Mycobacterium increased in the tap water disinfected with ClO₂. Overall, this study provided the detailed variation in the bacterial community in the drinking water system.     

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Direct synthesis of dimethyl ether(DME) by CO_2 hydrogenation has been investigated over three hybrid catalysts prepared by different methods:co-precipitation,sol-gel,and solid grinding to produce mixed Cu,ZnO,ZrO_2 catalysts that were physically mixed with a commercial ferrierite(FER) zeolite.The catalysts were characterized by N_2 physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),temperature programmed desorption of CO_2(CO_2-TPD),temperature programmed desorption of NH_3(NH_3-TPD),and temperature programmed H2 reduction(H_2-TPR).The results demonstrate that smaller CuO and Cu crystallite sizes resulting in better dispersion of the active phases,higher surface area,and lower reduction temperature are all favorable for catalytic activity.The reaction mechanism has been studied using in situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS).Methanol appears to be formed via the bidentate-formate(b-HCOO) species undergoing stepwise hydrogenation,while DME formation occurs from methanol dehydration and reaction of two surface methoxy groups.     

UV/H2O2 oxidation of tri(2-chloroethyl) phosphate: Intermediate products, degradation pathway and toxicity evaluation

Tri(2-chloroethyl) phosphate (TCEP) with the initial concentration of 5 mg/L was degraded by UV/H₂O₂ oxidation process. The removal rate of TCEP in the UV/H₂O₂ system was 89.1% with the production of Cl^? and PO₄^3? of 0.23 and 0.64 mg/L. The removal rate of total organic carbon of the reaction was 48.8% and the pH reached 3.3 after the reaction. The oxidative degradation process of TCEP in the UV/H₂O₂ system obeyed the first order kinetic reaction with the apparent rate constant of 0.0025 min^?1 (R²=0.9788). The intermediate products were isolated and identified by gas chromatography-mass spectrometer. The addition reaction of HO? and H₂O and the oxidation reaction with H₂O₂ were found during the degradation pathway of 5 mg/L TCEP in the UV/H₂O₂ system. For the first time, environment risk was estimated via the “ecological structure activity relationships” program and acute and chronic toxicity changes of intermediate products were pointed out. The luminescence inhibition rate of photobacterium was used to evaluate the acute toxicity of intermediate products. The results showed that the toxicity of the intermediate products increased with the increase of reaction time, which may be due to the production of chlorine compounds. Some measures should be introduced to the UV/H₂O₂ system to remove the highly toxic Cl-containing compounds, such as a nanofiltration or reverse osmosis unit.     

Ozone pollution characteristics and sensitivity analysis using an observation-based model in Nanjing, Yangtze River Delta Region of China

Ground-level ozone (O₃) has become a critical pollutant impeding air quality improvement in Yangtze River Delta region of China. In this study, we present O₃ pollution characteristics based on one-year online measurements during 2016 at an urban site in Nanjing, Jiangsu Province. Then, the sensitivity of O₃ to its precursors during 2 O₃ pollution episodes in August was analyzed using a box model based on observation (OBM). The relative incremental reactivity (RIR) of hydrocarbons was larger than other precursors, suggesting that hydrocarbons played the dominant role in O₃ formation. The RIR values for NO_X ranged from –0.41%/% to 0.19%/%. The O₃ sensitivity was also analyzed based on relationship of simulated O₃ production rates with reductions of VOC and NO_X derived from scenario analyses. Simulation results illustrate that O₃ formation was between VOCs-limited and transition regime. Xylenes and light alkenes were found to be key species in O₃ formation according to RIR values, and their sources were determined using the Positive Matrix Factorization (PMF) model. Paints and solvent use was the largest contributor to xylenes (54%), while petrochemical industry was the most important source to propene (82%). Discussions on VOCs and NO_X reduction schemes suggest that the 5% O₃ control goal can be achieved by reducing VOCs by 20%. To obtain 10% O₃ control goal, VOCs need to be reduced by 30% with VOCs/NO_X larger than 3:1.