Using consequence analysis on some chlorine operation hazards and their possible effects on neighborhoods in central Taiwan

The applications of chlorine have been broadly used in many industrial products, such as bleaching agents, synthetic rubbers, plastics, disinfectants, iron chlorides, fire refractory materials, insecticides, and anti-freezers, etc. According to the Taiwan Environmental Protection Administration (TEPA), more than 30 thousand tons were used in the year 2000. In addition, there were more than 12 reported incidents from 2000 to 2003—mostly on using chlorine as disinfectants (five) and as process agents (four).

This study investigated 15 chlorine operation plants in central Taiwan. These chlorine usages included bleaching agents, disinfectants, iron chloride, synthesizing rubber plastics, and others. Thirteen plants were located in the industrial parks and two were in or near residential zones. The consequence analysis were used three different methods to analyze the worst-case scenarios (WCSs) and alternative release case scenarios (ACSs) in order to compare impact zones for applying various active and passive mitigation systems, such as confined space, scrubber, water-spray, and so no. For two plants in or near residential zones, multi-layers mitigation systems and operation limits should be implemented in order to enforce more stringent protection measures. However, there was no specific regulation for chlorine plants operated at different locations, such as industrial parks or residential zones. In order to reduce chemical accidents and their impacts on public safety, our results suggest that source mitigation/management and warning systems should be adopted simultaneously.     

Preparation of activated carbons from raw and biotreated agricultural residues for removal of volatile organic compounds

Activated carbons with diverse physical and chemical properties were produced from four agriculture residues, including raw barley husk, biotreated barley husk, rice husk, and pistachio shell. Results showed that with adequate steam activation (30-90 min, 50% H2O(g),/50% N2), activated carbons with surface areas between 360 and 950 m2 g(-1) were developed. Further increases in the activation time destroyed the pore structure of activated carbons, which resulted in a decrease in the surface area and pore volume. Biotreated agricultural residues were found to be suitable precursors for producing mesoporous activated carbons. The oxygen content of activated carbons increased with increasing activation time. Results from X-ray photoelectron spectroscopy examination further suggested that H2O molecules react with the carbon surface, enhancing the deconvoluted peak area of carbonyl and carboxyl groups. Equilibrium adsorption of toluene indicated that the adsorption capacities increased with an increase in the inlet toluene concentration and a decrease in temperature. The adsorption isotherms were successfully fitted with Freundlich, Langmuir, and Dubinin-Radushkevich equations. Activated carbons derived from agricultural residues appear to be more applicable to adsorb volatile organic compounds at a low concentration and high-temperature environment.     

Pah characteristics in ambient air within a steel industrial complex

Ambient air samples at ten sites in an iron and steel industrial complex were collected from June to December for analyzing polycyclic aromatic hydrocarbons (PAHs). Sixteen species of PAH components in air samples were identified. The results indicate that both gaseous phase and particle‐bound PAHs at the top of the cokemaking plants are unusually high. The profiles of particle‐bound PAHs indicate that the predominant species at the top of, the coke oven batteries are those of high molecular weight components. The major components of particle‐bound PAHs at sampling sites near the fenceline, however, include the medium molecular weight components. The PAH profiles of air samples within the industrial complex show a strong similarity to those of cokemaking plant samples. The concentrations and the specific content of benzo(a)pyrene in the iron and steel industrial complex are higher than those values measured in urban area, petrochemical industry park, and open‐air burning area.     

Thermal hazard analysis of triacetone triperoxide (TATP) by DSC and GC/MS

Thermal degradation of triacetone triperoxide (TATP) was studied using differential scanning calorimetry (DSC) and gas chromatography/mass spectrometry (GC/MS). TATP, a potential explosive material, is powerful organic peroxide (OP) that can be synthesized by available chemicals, such as acetone and hydrogen peroxide in the laboratory or industries. The thermokinetic parameters, such as exothermic onset temperature (T₀) and heat of decomposition (ΔH_d), were determined by DSC tests. The gas products from thermal degradation of TATP were identified using GC/MS technique.In this study, H₂O₂ was mixed with propanone (acetone) and H₂SO₄ catalysis that produced TATP. The T₀ of TATP was determined to be 40 °C and E_a was calculated to be 65 kJ/mol. A thermal decomposition peak of H₂O₂ was analyzed by DSC and two thermal decomposition peaks of H₂O₂/propanone were determined. Therefore, H₂O₂/propanone mixture was applied to mix acid that was discovered a thermal decomposition peak (as TATP) in this study. According to risk assessment and analysis methodologies, risk assessment of TATP for the environmental and human safety issue was evaluated as 2-level of hazard probability rating (P) and 6-level of severity of consequences ratings (S). Therefore, the result of risk assessment is 12-point and was evaluated as “Undesirable” that should be enforced the effect of control method to reduce the risk.     

Continuous monitoring of ambient polycyclic aromatic hydrocarbons near open‐air burning of metal scraps

Airborne concentrations of PAH in the vicinity of the source region with open‐air burning of metal scraps were measured between February, 1992 and November, 1993. The activity of open‐air burning decreased significantly since 1993 due to prohibition regulation. Both gaseous phase and particle‐bound PAH were measured at five sampling sites, which included one reference sampling site far away from the source region. Both values of gaseous and particle‐bound PAH concentrations, which were measured in the vicinity of source region, decreased clearly during the two years monitoring period. It shows that the uncontrolled open‐air burning of metal scraps was a significant emission source of airborne PAH in the study area. The profiles of various species of PAH were also compared. A large decrease in benzo(a)pyrene was observed in the source region.     

pH indications in aqueous organic photodecompositions with carbonyl and hydroxyl groups

A pH variation pattern during organic compound (ethylene glycol, phenol, and glucose) decomposition under UV/H2O2 of different schemes was observed. This method was successfully applied to reflect the organic carbon oxidation progress, especially the rapid chemical oxygen demand (COD) decrease timing in the later mineralization stage. The results were demonstrated in a sequential feed-batch advanced oxidation reactor, showing that pH can be used as an alternative indicator to provide complete oxidation and cycle time information.