Assessing the Collection of Urban Solid Wastes: A Step Towards Municipality Benchmarking

The assessment of collection systems for municipal wastes is becoming an issue of increasing importance among local authorities. This paper contributes to this task by addressing and discussing a set of parameters that are characterizing certain aspects of the efficiency and effectiveness of the waste collection process. Case-study area for testing this set is the Thessaloniki Urban Area in Northern Greece. Specifically, a set of four evaluation indicators is initially discussed and quantified for each of the 14 considered municipalities, while the multiple-criteria decision support method of Analytical Hierarchy Process is finally applied to globally rank the municipalities. As a result, a classification of all examined municipalities is derived and various conclusions are drawn on certain efficiency and effectiveness aspects of waste collection systems.     

Influence of Building Density and Roof Shape on the Wind and Dispersion Characteristics in an Urban Area: A Numerical Study

The Computational Fluid Dynamics code CFX-TASCflow is used for simulating the wind flow and pollutant concentration patterns in two-dimensional wind-tunnel models of an urban area. Several two-dimensional multiple street canyon configurations are studied corresponding to different areal densities and roof shapes. A line source of a tracer gas is placed at the bottom of one street canyon for modelling street-level traffic emissions. The flow fields resulting from the simulations correspond to the patterns observed in street canyons. In particular and in good agreement with observations, a dual vortex system is predicted for a deep flat-roof street canyon configuration, while an even more complex vortex system is evidenced in the case of slanted-roof square street canyons. In agreement with measurement data, high pollutant concentration levels are predicted either on the leeward or the windward side of the street canyon, depending on the geometrical details of the surrounding buildings.     

Development and Use of Integrated Air Quality Management Tools in Urban Areas with the Aid of Environmental Telematics

Contemporary urban air quality management requires the use of appropriate systems which include air quality models, a Geographical Information System (GIS) and a combination of expert systems and decision support tools, while at the same time possessing the capability to receive information from in situ measurements. Until recently, the relation between Information Technology capabilities and the system's design and architecture were poorly addressed, mainly due to technological limitations posed. Moreover, air quality management scenario design issues were partially considered, because of the difficulty in aggregating complex, air quality related issues, in a comprehensive and effective manner, from the end users point of view. In the present paper the use of Environmental Telematics is discussed as a framework for the development of urban air quality management systems, while a comprehensive approach for the application and evaluation of relevant scenarios is presented.     

Measuring combined exposure to environmental pressures in urban areas: an air quality and noise pollution assessment approach

This study presents a methodological scheme developed to provide a combined air and noise pollution exposure assessment based on measurements from personal portable monitors. Provided that air and noise pollution are considered in a co-exposure approach, they represent a significant environmental hazard to public health. The methodology is demonstrated for the city of Thessaloniki, Greece. The results of an extensive field campaign are presented and the variations in personal exposure between modes of transport, routes, streets and transport microenvironments are evaluated. Air pollution and noise measurements were performed simultaneously along several commuting routes, during the morning and evening rush hours. Combined exposure to environmental pollutants is highlighted based on the Combined Exposure Factor (CEF) and Combined Dose and Exposure Factor (CDEF). The CDEF takes into account the potential relative uptake of each pollutant by considering the physical activities of each citizen. Rather than viewing environmental pollutants separately for planning and environmental sustainability considerations, the possibility of an easy-to-comprehend co-exposure approach based on these two indices is demonstrated. Furthermore, they provide for the first time a combined exposure assessment to these environmental pollutants for Thessaloniki and in this sense they could be of importance for local public authorities and decision makers. A considerable environmental burden for the citizens of Thessaloniki, especially for VOCs and noise pollution levels is observed. The material herein points out the importance of measuring public health stressors and the necessity of considering urban environmental pollution in a holistic way.     

Economic damages of ozone air pollution to crops using combined air quality and GIS modelling

This study aims at presenting a combined air quality and GIS modelling methodological approach in order to estimate crop damages from photochemical air pollution, depict their spatial resolution and assess the order of magnitude regarding the corresponding economic damages. The analysis is conducted within the Greater Thessaloniki Area, Greece, a Mediterranean territory which is characterised by high levels of photochemical air pollution and considerable agricultural activity. Ozone concentration fields for 2002 and for specific emission reduction scenarios for the year 2010 were estimated with the Ozone Fine Structure model in the area under consideration. Total economic damage to crops turns out to be significant and estimated to be approximately 43 M€ for the reference year. Production of cotton presents the highest economic loss, which is over 16 M€, followed by table tomato (9 M€), rice (4.2 M€), wheat (4 M€) and oilseed rape (2.8 M€) cultivations. Losses are not spread uniformly among farmers and the major losses occur in areas with valuable ozone-sensitive crops. The results are very useful for highlighting the magnitude of the total economic impacts of photochemical air pollution to the area’s agricultural sector and can potentially be used for comparison with studies worldwide. Furthermore, spatial analysis of the economic damage could be of importance for governmental authorities and decision makers since it provides an indicative insight, especially if the economic instruments such as financial incentives or state subsidies to farmers are considered.     

Integrated Assessment of Air Pollution Abatement Strategies in Urban Areas: Application to the Greater Athens Area

This paper presents an integrated system for the assessmentof technical and non-technical measures that are putforward in order to reduce air pollution levels in urbanareas. In contrast to the majority of the currentlyemployed assessment tools, this system allows for theevaluation of any proposed air pollution control measure interms of its combined impact on air quality and socialwelfare, by correlating the environmental and economicaspects of alternative air pollution abatement solutions.Based on the multi-pollutant, multi-effect concept, thesystem presented aims in providing policy-makers with areliable tool for the objective assessment of the mostcost-effective packages of measures, the latter beingallocated according to the particular features and needs ofthe areas examined.     

NATO/CCMS Pilot study workshop on air pollution trarfsport and diffusion over coastal urban areas

The NATO/CCMS Pilot Study “Air pollution transport and diffusion over coastal urban areas” held an international workshop in Athens, 3–5 May 1993. The objective of this workshop was to develop guidelines for it reference experiment in a coastal urban area. It was intended that the guidelines would be sufficiently general that they could be applied to any coastal urban area, but Athens was bome in mind as a suitable candidate location. On the first day of the workshop, invited speakers delivered their lectures on different issues of dispersion in urban coastal areas. The second day was devoted to discussions in working groups focusing on key issues, such as, emissions' inventory, meteorological measurements, surface pollutant concentration measurements, aircraft measurements, remote sensing and model evaluation. On the final half-day the rapporteur from each working group reported on its work. Their reports are briefly summarized in the present paper.     

Optimising reverse logistics network to support policy-making in the case of Electrical and Electronic Equipment

Due to the rapid growth of Waste Electrical and Electronic Equipment (WEEE) volumes, as well as the hazardousness of obsolete electr(on)ic goods, this type of waste is now recognised as a priority stream in the developed countries. Policy-making related to the development of the necessary infrastructure and the coordination of all relevant stakeholders is crucial for the efficient management and viability of individually collected waste. This paper presents a decision support tool for policy-makers and regulators to optimise electr(on)ic products’ reverse logistics network. To that effect, a Mixed Integer Linear Programming mathematical model is formulated taking into account existing infrastructure of collection points and recycling facilities. The applicability of the developed model is demonstrated employing a real-world case study for the Region of Central Macedonia, Greece. The paper concludes with presenting relevant obtained managerial insights.     

Depth of manual dismantling analysis: A cost–benefit approach

This paper presents a decision support tool for manufacturers and recyclers towards end-of-life strategies for waste electrical and electronic equipment. A mathematical formulation based on the cost benefit analysis concept is herein analytically described in order to determine the parts and/or components of an obsolete product that should be either non-destructively recovered for reuse or be recycled. The framework optimally determines the depth of disassembly for a given product, taking into account economic considerations. On this basis, it embeds all relevant cost elements to be included in the decision-making process, such as recovered materials and (depreciated) parts/components, labor costs, energy consumption, equipment depreciation, quality control and warehousing. This tool can be part of the strategic decision-making process in order to maximize profitability or minimize end-of-life management costs. A case study to demonstrate the models’ applicability is presented for a typical electronic product in terms of structure and material composition. Taking into account the market values of the pilot product’s components, the manual disassembly is proven profitable with the marginal revenues from recovered reusable materials to be estimated at 2.93–23.06 €, depending on the level of disassembly.     

On the Performance and Applicability of Nonlinear Two-Equation Turbulence Models for Urban Air Quality Modelling

It is well known that the commonly used k- turbulence models yield inaccurate predictions for complex flow fields. One reason for this inaccuracy is the misrepresentation of Reynolds stress differences. Nonlinear turbulence models are capable to overcome this weakness while being not considerably more complex. However no comprehensive studies are known which analyze the performance of nonlinear turbulence models for three-dimensional flows around building-shaped structures. In the present study the predictions of the flow around a surface-mounted cube using three nonlinear two-equation turbulence models are discussed. The results are compared with predictions of the standard k- turbulence model and wind tunnel measurements. It is shown that the use of nonlinear turbulence models can be beneficial in predicting wind flows around buildings.