Suitability assessment of groundwater for drinking, irrigation and industrial use in some North Indian villages

The study comprised suitability assessment of groundwater for drinking, irrigation, and industrial use. A total of 34 groundwater samples were collected from Rewari town and its perimeter from the land chiefly used for agriculture. Physico-chemical characterization of the samples revealed that groundwater from most of the sources was not fit for drinking owing to a high concentration of calcium, magnesium, hardness and fluoride. Suitability for irrigation, too, was low since most of the sources had high value of sodium adsorption ratio (SAR), residual sodium carbonate (RSC), soluble sodium percentage (SSP) and magnesium hazard which can render salinity and alkali hazard to soils on long term use in irrigation. No source of water was found to be suitable for industrial application since it had high concentration of calcium carbonate which can precipitate very easily. It was observed that sodium, sulphate, and chloride were the chief ions present in water and based on the abundance of ions and their correlation type, most of the groundwater samples are of sodium sulphate and/or sodium chloride type. The high concentration of the chemical constituents is attributed to the lithologic composition of the area. It was observed that the water of deep meteoric percolation type was of sodium sulphate type and the shallow of sodium chloride type.     

Heavy metal contamination in the Delhi segment of Yamuna basin

Concentration of heavy metals (Cd, Ni, Zn, Fe, Cu, Mn, Pb, Cr, Hg and As) in the waters of River Yamuna and in the soil of agricultural fields along its course in Delhi are reported from 13 sites, spread through the Delhi stretch of Yamuna, starting from the Wazirabad barrage till the Okhla barrage. Varying concentration of heavy metals was found. Peaks were observed in samples collected downstream of Wazirabad and Okhla barrage, indicating the anthropogenic nature of the contamination. The Wazirabad section of the river receives wastewater from Najafgarh and its supplementary drains, whereas the Shahdara drain releases its pollution load upstream of the Okhla barrage. Average heavy metal concentration at different locations in the river water varied in the order of Fe>Cr>Mn>Zn>Pb>Cu>Ni>Hg>As>Cd. The river basin soil shows higher level of contamination with lesser variation than the water samples among sampling locations, thereby suggesting deposition over long periods of time through the processes of adsorption and absorption. The average heavy metal concentration at different locations in soil varied in the order of Fe>Mn>Zn>Cr>Pb>Ni>Hg>Cu>As>Cd.     

Assessment of heavy metals and their interrelationships with some physicochemical parameters in eco-efficient rivers of Himalayan region

Most precious and world famed Himalayan rivers like Ganga, Yamuna, and their tributaries are originated from Uttarakhand state of India. Over the years, increased industrial activities and urban growth along the rivers and lakes have resulted in increased load over the water bodies. In the present study, a comparison of characteristics of water quality with respect to heavy metals (Fe, Zn, Cu, and Pb) and their interrelationships with some physiological parameters during different seasons of year 2010 has been made in the water bodies flowing through the two geographical regions, namely Garhwal and Kumaon regions of the Himalayan State of India. All observed values of Pb, 02 observation of the Cu, and 59 observations of Fe are found exceed with the WHO standard for drinking water; 83 observations of Pb, 110 observations of Cu, and 59 observations of Fe are found exceed with the Bureau of Indian Standards. However, none of the observation of Zn is found exceeding with the standard limit. Cu shows the highest concentration 7.30 mg/l among all observations and also its higher concentration in Kumaon rivers. All the metals show negative correlation with dissolved oxygen and pH. Fe in river Yamuna system and Zn in Kumaon rivers show significant temporal variations at 90 % level of significance (LOS). However, no significant temporal difference of remaining metals is observed even at 95 % LOS. All metals except Fe in river Yamuna system show very significant variation in spatial distribution in different river systems at 95 % LOS.     

Identification of Swamp Deer (<Emphasis Type="Italic">Cervus duvauceli duvauceli</Emphasis> Cuvier) Potential Habitat in Jhilmil Jheel Conservation Reserve,Uttarakhand, India Using Multi-Criteria Analysis

The present study aims to identify the potential habitat for swamp deer (Cervus duvauceli duvauceli Cuvier) in Jhilmil Jheel Conservation Reserve in the Uttarakhand province of India using multi-criteria analysis. The study area represents one of the last remnant habitats of the flagship species, the swamp deer in Uttarakhand, which is considered as vulnerable. The study showed that only 6.08% of the study area (225 km²) was highly suitable to suitable for the swamp deer. An area of 135.52 km² (60.23%) turned out to be moderately suitable. Within the officially designated Conservation Reserve (area 37.84 km²), 10.91% (4.13 km²) area was found highly suitable to suitable, while 74.19% (28.07 km²) happens to be moderately suitable. Only 14 km² area, which was found as suitable habitat for swamp deer falls short of the space required by a population of 134 animals. The problem could be mitigated if the agricultural land (2.47 km²) adjacent to the Jhilmil Jheel is brought under the Reserve management. This would provide additional area to meet the fodder requirement. The study brings out a particularly grim situation with limited options for conservation and management of the swamp deer in the Indo-Gangetic plains. It also emphasizes the role of geospatial techniques in quick appraisal of habitat attributes and identification of potential sites for protected areas.     

A discussion to promote global sustainability techniques for motivating plastic waste to minimize carbon footprints

This paper emphasizes the significant challenges facing the sustainable environment, including managing and handling plastic waste and reducing carbon footprints. To tackle these challenges, it is essential to identify people's awareness levels of waste handling techniques and their pro-environmental behaviors. The study focuses on Guwahati, one of the most important cities in Northeast India, which generates increasing plastic waste daily. The paper aims to identify the factors contributing to the reduction of carbon footprints resulting from plastic waste management activities. The data collected from 1326 respondents was analyzed using factor analysis, and the reliability of the dataset was confirmed using Cronbach's alpha (0.84 for the awareness level of waste management techniques and 0.780 for the prevalent mode of plastic waste management techniques). KMO (0.796), Bartlett's test of sphericity (p < 0.001), and determinant score (0.019) were used to assess the data adequacy and factorability of the dataset, and the results were found to be satisfactory. Principal component analysis, exploratory factor analysis, and varimax orthogonal rotation method were used to identify high-loaded factors by reducing the number of variables. The results showed that two highly loaded components, namely awareness level of waste management techniques (AWMT) and prevalent mode of plastic waste management techniques (PWMT), explained 27.53% and 24.34% of the total variance, respectively, with eigenvalues of 3.35 and 2.88. The regression model confirmed the statistical significance of these factors (p < 0.001) and their relationship with the dependent variable, greenhouse reduction (GHGR). The study proposes that minimizing carbon footprints in the environment can be achieved by focusing on a limited number of controllable factors such as AWMT and PWMT. This study provides valuable insights to the authorities in controlling waste generation and achieving a pollution-free environment.     

Sustainable options of post treatment of UASB effluent treating sewage: A review

The upflow anaerobic sludge blanket (UASB) process is reported to be a sustainable technology for domestic wastewaters treatment in developing countries and for small communities. However, the inability of UASB process to meet the desired disposal standards has given enough impetus for subsequent post treatment. In order to upgrade the UASB based sewage treatment plants (STPs) to achieve desired effluent quality for disposal or for reuse, various technological options are available and broadly differentiated as primary post-treatment for the removal of organic and inorganic compounds and suspended matter; secondary post-treatment for the removal of hardly degradable soluble matter, colloidal and nutrients; and polishing systems for removals of pathogens. Hence, this paper discusses the different systems for the treatment of UASB reactor effluent treating sewage. Additionally, a comparative review, an economic evaluation of some of the emerging options was conducted and based on the extensive review of different integrated combination, i.e. UASB-different aerobic systems, a treatment concept based on natural biological mineralization route recognized as an advanced technology to meet all practical aspects to make it a sustainable for environmental protection, resource preservation and recovering maximum resources.     

Evolution in mitigation approaches for petroleum oil-polluted environment: recent advances and future directions

Environmental Science and Pollution Research - Increasing petroleum consumption and a rise in incidental oil spillages have become global concerns owing to their aquatic and terrestrial toxicity....     

Combating Desertification: Building on Traditional Knowledge Systems of the Thar Desert Communities

The Thar Desert of western India is known for its rich and ancient culture system and traditions. The communities have long been part of the Thar Desert ecosystem and have evolved specific strategies to live in harmony with its hostile environment. This culture has provided several miracle plants of immense food and medicinal value to modern civilisation. The ancient rural livelihood knowledge system reflects time-tested techno-scientific knowledge with a proven track record of sustainability, especially during natural hazards like drought and famines. In addition, several of the traditional skills of local communities in arts and crafts, music and instruments have made modern man aware of the art and techniques of sustainably utilising local biological resources and preserving their biodiversity along with using waste products of the forests, without harming the desert ecosystem. Traditional cultural and socio-religious values are fast dwindling under the impact of materialistic approach, industrialisation and development. This paper endeavours to illustrate the need to assist and propagate indigenous rural livelihood systems rather than mindlessly replace or abandon them as a result of state bureaucracies.