Environmental impacts of residual Municipal Solid Waste incineration: A comparison of 110 French incinerators using a life cycle approach

Incineration is the main option for residual Municipal Solid Waste treatment in France. This study compares the environmental performances of 110 French incinerators (i.e. 85% of the total number of plants currently in activity in France) in a Life Cycle Assessment perspective, considering 5 non-toxic impact categories: climate change, photochemical oxidant formation, particulate matter formation, terrestrial acidification and marine eutrophication. Mean, median and lower/upper impact potentials are determined considering the incineration of 1 tonne of French residual Municipal Solid Waste. The results highlight the relatively large variability of the impact potentials as a function of the plant technical performances. In particular, the climate change impact potential of the incineration of 1 tonne of waste ranges from a benefit of ?58 kg CO₂-eq to a relatively large burden of 408 kg CO₂-eq, with 294 kg CO₂-eq as the average impact. Two main plant-specific parameters drive the impact potentials regarding the 5 non-toxic impact categories under study: the energy recovery and delivery rate and the NO_x process-specific emissions. The variability of the impact potentials as a function of incinerator characteristics therefore calls for the use of site-specific data when required by the LCA goal and scope definition phase, in particular when the study focuses on a specific incinerator or on a local waste management plan, and when these data are available.     

Compostability of Poly(lactide): Degradation in an Inert Solid Medium

Commercial poly(lactide) degradation was studied in an inert solid medium simulating compost conditions, with the aim to achieve a complete carbon balance of the polymer degradation. The mineralisation rate at the end of the test was compared to those obtained for poly(lactide) degradation in compost. It was shown that the mineralisation rate after 45 days of degradation was quite lower in inert solid medium than in compost but the standard deviation of data was enhanced. A protocol for both extraction and quantification of the carbon included in the different degradation by-products was proposed and the carbon balance of the polymer degradation was followed during the test with a satisfactory accuracy. The non-degraded PLA material was recovered during the test, hence the evolution of the glass transition temperature and the molecular weight was followed. A two-step degradation mechanism was highlighted in inert solid medium, showing the fundamental role of abiotic reactions for PLA degradation in compost.     

Rapid removal of flutriafol in water by zero-valent iron powder

A study of the effect of zero-valent iron (ZVI) powder is carried out for the first time on the degradation of flutriafol ((RS)-2,4'-difluoro-alpha-(1H-1,2,4-triazol-1-ylmethyl)-benzhydryl alcohol, C(16)H(13)F(2)N(3)O), a bifluorinated soil and water persistent triazole pesticide using a laboratory scale device consisting of a 20 ml pyrex serum vials fixed to a Vortex agitator. Different amounts of ZVI powder (10-50 g l(-1)) at pH 6.6 and room temperature were investigated. Experiments showed an observed degradation rate k(obs) directly proportional to the surface of contact of flutriafol with ZVI. Flutriafol degradation reactions demonstrated first order kinetic with a half-live of about 10.8+/-0.5 min and 3.6+/-0.2 min when experiments were conducted at [ZVI]=10 g l(-1) into oxygenated and anoxic solutions, respectively. Three analytical techniques were employed to monitor flutriafol degradation and to understand solution and by-products behaviors: (1) A UV-Vis spectrophotometer; (2) a high performance liquid chromatography (HPLC) coupled with a photo diode array (PDA) and fluorescence detectors; (3) a similar HPLC coupled with a PDA and a mass spectrometer detectors equipped with an atmospheric pressure photoionization source. Results showed a complete disappearance of flutriafol after 20 min of contact with ZVI, the loss of fluorescence properties of the final by-products, the defluorination of the triazole pesticide via hydroxylation reaction and finally the hydrogenation of the triazole ring.     

Assessment of potential health risk for inhabitants living near a former lead smelter. Part 1: metal concentrations in soils, agricultural crops, and homegrown vegetables

Soil contamination by metals engenders important environmental and health problems in northern France where a smelter (Metaleurop Nord) was in activity for more than a century. This study aims to look at the long-term effects of the smelter after its closedown by combining data on the degree of soil contamination and the quality of the crops grown (agricultural crops and homegrown vegetables) in these soils for a better assessment of the local population’s exposure to Cd, Pb, and Zn. Seven years after the Metaleurop Nord closedown, (1) the agricultural and urban topsoils were strongly contaminated by Cd, Pb, and Zn; (2) the kitchen garden topsoils were even more polluted than the agricultural soils, with great variability in metal concentrations within the gardens studied; (3) a high proportion of the agricultural crops for foodstuffs did not conform with the European legislation; (4) for feedstuffs, most samples did not exceed the Cd and Pb legislation limits, indicating that feedstuffs may be an opportunity for most agricultural produce; and (5) a high proportion of the vegetables produced in the kitchen gardens did not conform with the European foodstuff legislation. The high contamination level of the soils studied continues to be a risk for the environment and the population’s health. A further investigation (part 2) assesses the associated potential health risk for local inhabitants through consumption of homegrown vegetables and ingestion of soil particles by estimating the site-specific human health assessment criteria for Cd and Pb.     

Catalytic degradation of chlorothalonil in water using bimetallic iron-based systems

Modified zero valent iron (MZVI) was used to study the transformation of a chlorothalonil (CLT) solution and the variation of the observed degradation rate of the reduction reactions. This was carried out when transition metals e.g. Pd, Cu and Co plated on the surface of micrometric iron particles (< 150 microm) were used as reducing catalytic agents for pesticide removal. Reactions were undertaken under both oxic and anoxic conditions in the presence and the absence of a phosphate buffer solution (PBS). Results of batch studies in nitrogen sparged solutions revealed that incomplete slow dechlorination merely occurred with zero valent iron (ZVI), however, complete rapid dechlorination reactions took place with MZVI especially Fe/Pd. Dechlorination was depicted by studying UV absorbance and MS spectra of CLT and all corresponding by-products. Typical blue shifts (deltalambda = 4-6 nm/chlorine atom) were observed at the same time as chlorine cluster isotopes disappeared. After the plating process, metal loading was controlled by analyzing the remaining metal in the solution by atomic absorption spectroscopy. Experiments showed that CLT degradation mechanism is faster in nitrogen sparged solutions in the absence of PBS. Time needed for complete removal of 2.08 +/- 0.19 microM CLT solution was about 2 h when experiments were conducted with ZVI (t1/2 = 15.0 min) and about 10 min when the reaction was carried out under the same conditions with Fe/Pd 1% (t1/2 = 1.0 min). Degradation rates for all bimetallic systems were determined showing that Pd is the more exciting catalytic transition metal followed by Cu and Co. Furthermore, MZVI method showed obvious advantage to traditional CLT treatment methods.     

Base-neutral extractable organic pollutants in biota and sediments from Lake Pontchartrain

A study was conducted to screen the three passes that link Lake Pontchartrain to the Gulf of Mexico via Lake Borne for the presence of EPA base-neutral (BN) priority pollutants and any other pollutants detected in significant concentration. Biota and sediment samples were collected and analytical procedures were developed for the trace analysis of BN organics in these matrices. Compounds identified include alkanes (normal, branched, cyclic), alkenes, aromatics, alkylated aromatics, polynuclear aromatic hydrocarbons and their alkylated derivatives, phthalates, ketones, furans, thiophenes, phenols, amines, nitriles, thiazoles, amides, aldehydes, alcohols, free fatty acids, fatty acid methyl and ethyl esters, phosphates, sterols. Concentrations were in the parts-per-billion range.