Environmental monitoring of historical change in arsenic deposition with tree bark pockets

ICP-MS analysis recorded historical change (c. 1846 to 2002) in the arsenic concentration of bark included within the trunks (tree bark pockets) of two Japanese oak trees (Quercus crispula), collected at an elevated location approximately 10 km from the Ashio copper mine and smelter, Japan. The arsenic concentration of the bark pockets was 0.016 +/- 0.003 microg cm(-2) c. 1846 (n = 5) and rose 50-fold from c. 1875 to c. 1925, from approximately 0.01 to 0.5 microg cm(-2). The rise coincided with increased copper production in Ashio from local sulfide ores, from 46 tons per year in 1877 to 16,500 tons per year in 1929. Following a decline in arsenic concentration and copper production, in particular during the Second World War, a second peak was observed c. 1970, corresponding to high levels of production from both local (6,000 tons per year) and imported (30,000 tons per year) ores, smelted from 1954. Compared to the local ores, the contribution of arsenic from imported ores appeared relatively low. Arsenic concentrations declined from c. 1970 to the present following the closure of the mine in 1974 and smelter in 1989, recording 0.058 +/- 0.040 microg cm(-2) arsenic (n = 5) in surface bark collected in 2002. The coincident trends in arsenic concentration and copper production indicated that the bark pockets provided an effective record of historical change in atmospheric arsenic deposition.     

Building a place-responsive society through inclusive local projects and networks

This paper presents the story of a project undertaken by researchers who are active participants in the national Australian debate over place and belonging. It arose from the desire to ground this debate, which brings issues of ecological sustainability, reconciliation and multiculturalism together, in more localised action aimed at building a 'place-responsive society'. The project was carried out as a case study in a region that combines part of the Sydney metropolitan area and the separate 'city' of the Blue Mountains, and involved a consultative committee and then a regional forum of conservationists, environmental educators and community workers. The researchers explored existing place-oriented initiatives in the region and developed practical projects for the future, most notably a proposal for 'totemic species' work within schools involving local Aboriginal people. The research demonstrated, more than anything else, that indigenous Australian approaches to 'place awareness' and nature conservation remain highly relevant in contemporary Australia. It also showed that bioregional awareness and the notion of place responsiveness can add value to more traditional approaches to nature conservation and environmental education. There are opportunities to galvanise local action that can integrate community and environmental work and revitalise professional practice in both areas, but the effort involves working constantly with difference and conflict.     

The case for carbon leakage and border adjustments: where do economists stand?

Environmental Economics and Policy Studies - While the EU is working toward the implementation of the world’s first Carbon Border Adjustment (CBA) Mechanism, a gap remains between the ways in...     

Evaluation of two models of a slipmeter

The aim of the study was to compare the performances of the Brungraber Mark II (BM II) and Mark III (BM III) slipmeters. Friction measurements with the two slipmeters were conducted in a laboratory using four footwear materials, four floor types, and three surface conditions. Both the coefficient of friction (COF) values obtained with the slipmeters and the force platform-based COF values were measured. The COF measured with the BM II was slightly higher than that measured with the BM III with a R² of 0.83. A comparison of the averaged normal force between the two slipmeters showed that the BM II generated a significantly higher normal force than the BM III at a low COF and the difference of the normal force between the two slipmeters decreased when the COF value was increased. The regression analysis results in this study showed that the force platform-based COF values were closer to the COF values obtained with the BM III than with the BM II. The R² values for the regression model between the COF values obtained from the slipmeter and the force platform were 0.90 and 0.79 for the BM II and BM III, respectively.     

Monitoring of carbon monoxide in residences with bulk wood pellet storage in the Northeast United States

The interest in biomass fuel is continuing to expand globally and in the northeastern United States as wood pellets are becoming a primary source of fuel for residential and small commercial systems. Wood pellets for boilers are often stored in basement storage rooms or large bag-type containers. Due to the enclosed nature of these storage areas, the atmosphere may exhibit increased levels of carbon monoxide. Serious accidents in Europe have been reported over the last decade in which high concentrations of carbon monoxide (CO) have been found in or near bulk pellet storage containers. The aim of this study was to characterize the CO concentrations in areas with indoor storage of bulk wood pellets. Data was obtained over approximately 7 months (December 2013 to June 2014) at 25 sites in New Hampshire and Massachusetts: 16 homes using wood pellet boilers with indoor pellet storage containers greater than or equal to 3 ton capacity; 4 homes with wood pellet heating systems with outdoor pellet storage; 4 homes using other heating fuels; and a university laboratory site. CO monitors were set up in homes to collect concentrations of CO in the immediate vicinity of wood pellet storage containers, and data were then compared to those of homes using fossil fuel systems. The homes monitored in this study provided a diverse set of housing stock spanning two and a half centuries of construction, with homes built from 1774 to 2013, representing a range of air exchange rates. The CO concentration data from each home was averaged hourly and then compared to a threshold of 9 ppm. While concentrations of CO were generally low for the homes studied, the need to properly design storage locations for pellets is and will remain a necessary component of wood pellet heating systems to minimize the risk of CO exposure.

Implications: This paper is an assessment of carbon monoxide (CO) exposure from bulk wood pellet storage in homes in New Hampshire and Massachusetts. Understanding the CO concentrations in homes allows for better designs for storage bins and ventilation for storage areas. Hence, uniform policies for stored wood pellets in homes, schools, and businesses can be framed to ensure occupant safety. Currently in New York State rebates for the installation of wood pellet boilers are only provided if the bulk pellet storage is outside of the home, yet states such as New Hampshire, Vermont, and Maine currently do not have these restrictions.     

Effects of nitrogen application rate and a nitrification inhibitor dicyandiamide on methanotroph abundance and methane uptake in a grazed pasture soil

Methane-oxidizing bacteria (methanotrophs) in the soil are a unique group of methylotrophic bacteria that utilize methane (CH₄) as their sole source of carbon and energy which limit the flux of methane to the atmosphere from soils and consume atmospheric methane. A field experiment was conducted to determine the effect of nitrogen application rates and the nitrification inhibitor dicyandiamide (DCD) on the abundance of methanotrophs and on methane flux in a grazed pasture soil. Nitrogen (N) was applied at four different rates, with urea applied at 50 and 100 kg N ha^?1 and animal urine at 300 and 600 kg N ha^?1. DCD was applied at 10 kg ha^?1. The results showed that both the DNA and selected mRNA copy numbers of the methanotroph pmoA gene were not affected by the application of urea, urine or DCD. The methanotroph DNA and mRNA pmoA gene copy numbers were low in this soil, below 7.13?×?10³ g^?1 soil and 3.75?×?10³ μg^?1 RNA, respectively. Daily CH₄ flux varied slightly among different treatments during the experimental period, ranging from ?12.89 g CH₄ ha^?1 day^?1 to ?0.83 g CH₄ ha^?1 day^?1, but no significant treatment effect was found. This study suggests that the application of urea fertilizer, animal urine returns and the use of the nitrification inhibitor DCD do not significantly affect soil methanotroph abundance or daily CH₄ fluxes in grazed grassland soils.     

Local economic development — the changing public/private sector relationship

The paper examines changing approaches to local economic development in the period since 1974. Initially, it proposes an ‘orthodox’ model of local economic development policies which emphasised the provision of a better industrial fabric, and of financial assistance to small, inner city firms. It suggests three recent directions of change in emphasis from this orthodox model: help in the creation of new entrepreneurs; replacement of public sector by private sector action; local authority shareholding in local firms by use of Enterprise Boards. Each approach makes different assumptions about the public/private sector relationship, the last two involve a more explicitly ideological stance on this issue.     

Linking rights and standards: the process of developing "rights-based" minimum standards on food security, nutrition and food aid

This article examines the recent revision of the Sphere Minimum Standards in disaster response relating to food security, nutrition and food aid. It describes how the revision attempted to incorporate the principles of the Humanitarian Charter, as well as relevant human rights principles and values into the Sphere Minimum Standards. The initial aim of the revision was to ensure that the Sphere Minimum Standards better reflected the principles embodied in the Humanitarian Charter. This was later broadened to ensure that key legal standards and principles from human rights and humanitarian law were considered and also incorporated, in part to fill the "protection gap" within the existing standards. In relation to the food security, nutrition and food aid standards, it was agreed by participants in the process that the human right to adequate food and freedom from hunger should be incorporated. In relation to more general principles underlying the Humanitarian Charter, itself drawn largely from human rights and humanitarian law, it was agreed that there was a need to strengthen "protection" elements within the standards and a need to incorporate the basic principles of the right to life with dignity, non-discrimination, impartiality and participation, as well as to explore the relevance of the concept of the progressive realisation of the right to food. The questions raised in linking rights to operational standards required thought, on the one hand, about whether the technical standards reflected a deep understanding of the values expressed within the legal instruments, and whether the existing standards were adequate in relation to those legal rights. On the other hand, it also required reflection on how operational standards like Sphere could give concrete content to human rights, such as the right to food and the right to be free from hunger. However, there remain challenges in examining what a rights-based approach will mean in terms of the role of humanitarian agencies as duty-bearers of rights, given that the primary responsibility rests with state governments. It will also require reflection on the modes and mechanisms of accountability that are brought to bear in ensuring the implementation of the Minimum Standards.     

A GCMSD/ECD method for the simultaneous determination of toxaphene and toxaphene congeners

The methodology presented combines mass selective detection technology for routine automated total toxaphene determinations with electron capture detection confirmation of congener results. Total toxaphene values were calculated using a custom developed series of data analysis macroinstructions (macros) that eliminate potential interferences and collate peak areas. These macros create multi-level calibration tables with results automatically corrected for surrogate and performance standards. It is possible to produce congener data that provides results from both detectors in one report from a single injection.