An Analysis of Biomedical Waste Incineration

The California Air Resources Board (ARB) completed a series of source tests of eight operating biomedical waste incinerators (BMWI) under conditions of typical operation. The emissions of certain metals, and chlorinated dioxins and furans in the flue gases of BMWI are relatively high in comparison to emissions from other combustion sources, such as hazardous waste or municipal waste incinerators of modern design. This study reports on an analysis of the status of the existing regulatory framework and the California data base. Clarification of definitional issues at the federal level is needed to effectively treat BMWI management issues. Although few relationships among combustion parameters and emissions were uncovered, patterns of emissions were evident, suggesting commonality and relationships among the waste stream constituents and emissions. Potential implications for future research, operation of BMWI, controls and source reduction and waste segregation strategies are also discussed.     

The use of silver as a selective precipitant for I in radioactive waste management

¹²⁹I is one of the more hazardous nuclides occurring in radioactive waste. In the form of I⁻, its most likely speciation, it is poorly sorbed on most geologic media. Several workers have suggested the use of silver to precipitate I⁻ as the insoluble AgI, in a cemented waste form, or as a “getter”. The efficacy of this procedure is examined by experiment, in conjunction with thermodynamic predictions.The addition of AgNO₃ to Portland cement leads to coprecipitation with C-S-H, with low Ag solubilities ( 10 μmg/L); 2–;3 orders of magnitude lower than predicted (from Ag₂O). AgI is stable in these matrices, with low aqueous I concentrations (<2 mg/L). In 85% BFS-15% OPC pastes, AgI is unstable due to redox and complexation reactions, with much I⁻ passing into solution; concentrations up to 900 mg/L were observed. It is shown that repository conditions, on closure, are also likely to induce solubilisation of I⁻ from AgI. It is concluded that the use of Ag is unlikely to significantly improve the immobilisation properties of the near field for radioiodine.     

Glacier protection laws: Potential conflicts in managing glacial hazards and adapting to climate change

The environmental, socioeconomic and cultural significance of glaciers has motivated several countries to regulate activities on glaciers and glacierized surroundings. However, laws written to specifically protect mountain glaciers have only recently been considered within national political agendas. Glacier Protection Laws (GPLs) originate in countries where mining has damaged glaciers and have been adopted with the aim of protecting the cryosphere from harmful activities. Here, we analyze GPLs in Argentina (approved) and Chile (under discussion) to identify potential environmental conflicts arising from law restrictions and omissions. We conclude that GPLs overlook the dynamics of glaciers and could prevent or delay actions needed to mitigate glacial hazards (e.g. artificial drainage of glacial lakes) thus placing populations at risk. Furthermore, GPL restrictions could hinder strategies (e.g. use of glacial lakes as reservoirs) to mitigate adverse impacts of climate change. Arguably, more flexible GPLs are needed to protect us from the changing cryosphere.     

Stabilization of chloro-organics using organophilic bentonite in a cement-blast furnace slag matrix.

The application of cement-based stabilisation/solidification treatment to organic-containing wastes is made difficult by the adverse effect of organics on cement hydration. The use of organophilic clays as pre-solidification adsorbents of the organic compounds can reduce this problem because of the high adsorption power of these clays and their compatibility with the cementitious matrix. This work presents an investigation of the effect on hydration kinetics, physico-mechanical properties and leaching behaviour of cement-based solidified waste forms containing 2-chlorophenol and 1-chloronapthalene adsorbed on organophilic bentonites. These were prepared by cation exchange with benzyldimethyloctadecylammonium chloride and trimethyloctadecylammonium chloride. The binder was a 30% pozzolanic cement, 70% granulated blast furnace slag mixture. Several binder-to-bentonite ratios and different concentrations of the organics on the bentonite were used. Kinetics of hydration were studied by measurement of chemically bound water and by means of thermal and calorimetric analyses. Microstructure and other physico-mechanical properties of the solidified forms were studied by means of mercury intrusion porosimetry, scanning electron microscopy and unconfined compressive strength measurement. Leaching was checked by two different leaching tests: one dynamic, on monolithic samples, and the other static, on powdered samples. This study indicates that the incorporation of the organic-loaded bentonite in the binder matrix causes modifications in the hardened samples by altering cement hydration. The effects of the two organic contaminants are differentiated.     

An analysis of biomedical waste incineration.

The California Air Resources Board (ARB) completed a series of source tests of eight operating biomedical waste incinerators (BMWI) under conditions of typical operation. The emissions of certain metals, and chlorinated dioxins and furans in the flue gases of BMWI are relatively high in comparison to emissions from other combustion sources, such as hazardous waste or municipal waste incinerators of modern design. This study reports on an analysis of the status of the existing regulatory framework and the California data base. Clarification of definitional issues at the federal level is needed to effectively treat BMWI management issues. Although few relationships among combustion parameters and emissions were uncovered, patterns of emissions were evident, suggesting commonality and relationships among the waste stream constituents and emissions. Potential implications for future research, operation of BMWI, controls and source reduction and waste segregation strategies are also discussed.     

Recent Industrial Applications of Lignin: A Sustainable Alternative to Nonrenewable Materials

Lignin represents a vastly under-utilized natural polymer co-generated during papermaking and biomass fractionation. Different types of lignin exist, and these differ with regard to isolation protocol and plant resource (i.e., wood type or agricultural harvesting residue). The incorporation of lignin into polymeric systems has been demonstrated, and this depends on solubility and reactivity characteristics. Several industrial utilization examples are presented for sulfur-free, water-insoluble lignins. These include materials for automotive brakes, wood panel products, biodispersants, polyurethane foams, and epoxy resins for printed circuit boards.     

A simulation analysis of continental shelf food webs

Energy flow through continental shelf food webs was examined using a simulation model. The model structure expands the two traditional marine food chains of phytoplankton-zooplankton-pelagic fish and benthos-demersal fish into a complex web which includes detritus, dissolved organic matter (DOM), bacteria, protozoa, and mucus net feeders. Simulation of energy flux for different shelf systems using the expanded web revealed that heterotrophic microorganisms and their predators account for a significant component of the energy flux in the continental shelf ecosystem. Contrary to previous models, where all phytoplankton were considered to be grazed by zooplankton, our simulation results indicate that only slightly more than 50% of the annual net primary production is grazed. A substantial quantity of the phytoplankton production directly becomes detritus. Bacteria mineralize detritus and DOM produced by phytoplankton and other components of the food web, converting these to biomass with high efficiency. Consequently, the model predicts that planktonic bacterial production is equivalent to zooplankton production. Exclusion of the bacteria requires the assumption that all DOM is either exported from the system or consumed by another component of the food web. Neither of these assumptions can be supported by present knowledge of the dynamics of DOM in the sea. Model simulations were also employed to test the hypothesis that production exceeds consumption on continental shelves, resulting in exports of 50% of the annual primary production. Simulations of shelves with high rates of primary production resulted in a particulate export of 27% and realistic estimates of secondary production. Results of other simulations suggest that shelves with lower primary production cannot export production and still maintain the macrobenthos and their predators. General properties about continental shelves can also be inferred from the model. From simulations of shelves of differing primary production, nanoplankton are predicted to account for a greater proportion of the primary production in nutrient limited systems. Benthic production appears to be related to both the quantity of primary production and the sinking rates of the phytoplankton. The model indicates that zooplankton fecal inputs to the shelf benthos are only a small portion of the total detrital flux, leading to the prediction that fecal pellets are of little significance in determining benthic production. Finally, the model generates production efficiencies that are highly variable depending on the type of system and kind of populations involved. We argue that the assumed ecological efficiency of 10% should be abandoned for continental shelves and other ecosystems.