Studies on feeding repellents for fishes and shellfishes

The present study on chemotaxis activity was conducted between May 1989 and March 1990. In order to establish a chemotaxis index, with special reference to a repellence index of food for black abalone Haliotis discus, a logistic curve y=g/{1+ exp [-r(j-a)]}, where g, r and a are constants, was applied to time-courses of abalone responses to fresh and spoiled algal extracts. The time-courses were respresented by the number of individuals (y _i) displaying three behaviors (entering. leaving and remaining in a test compartment with algal sample) over time (j=1 to 10, 2-min intervals). Repellence and attraction specimens were prepared from a homogenate of green laver Ulva pertusa allowed to spoil for 2, 4 and 6 d at 40°C, and from fresh homogenate, respectively. Of 32 time-courses (estimated according to a method whereby the observed number was weighted by j for each behavior, involving 30 individuals), 32 entered, 19 left and 19 remained time-courses fitted the curve at the 0.10 level, as determined by a chi-square test. A general evaluation of repellence and attraction, determined by observable behavior, agreed well with the difference in a between the dummy (control) and specimen curves, and with the ratio of a in the dummy curve to a in the specimen curve, for logistic curves fitted to the entred time-course. The difference was >0 and the ratio was >1 in the repellence index, and <0 or <1 respectively in the attraction index. The validity of the indexes was ascertained using food specimens prepared from three kinds of algae.     

Asymmetric hydrogenation using modified ion exchange resin-palladium catalysts

The Science of Nature -     

Transition of human and livestock waste management in rural Hanoi: a material flow analysis of nitrogen and phosphorus during 1980–2010

Journal of Material Cycles and Waste Management - Human and livestock waste, i.e., excreta, were intensively used in crop cultivation in Asia over the years. However, rapid economic growth induced...     

Analytical survey of arsenic in geothermal waters from sites in Kyushu,Japan, and a method for removing arsenic using magnetite

The objective of this study was to survey the cation and anion contents of geothermal waters to gather fundamental information on geographical variations. Sixteen sites in hot spring areas on the island of Kyushu in Japan were studied. The study focused on the arsenic content of the samples. Very high arsenic concentrations (more than 0.1 mg/l) were detected in most of the geothermal waters sampled. High contents of boron and fluoride (more than 1.0 mg/l) were also detected in some samples. Arsenic removal was performed on a laboratory scale using columns packed with a magnetite-type adsorbent. The reduction of arsenic contamination to a concentration of less than 0.01 mg/l could be achieved in the early stages of adsorption (bed volume = 200).     

Historical and geographical aspects of the increasing perfluorooctanoate and perfluorooctane sulfonate contamination in human serum in Japan

Perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA) have recently received attention due to their widespread contamination in the environment, as well as in wildlife and humans. We measured the PFOS and PFOA concentrations in historically recorded human serum samples at an age range between 20 and 59 years collected in Kyoto, 20 persons per each time point (n=100), and also the PFOS and PFOA concentrations in human serum samples at an age range between 20 and 59 years from 10 locations throughout Japan (n=200). The historical samples collected from 1983 to 1999 demonstrated that the PFOA concentrations in males and females from Kyoto have increased 4.4-fold and 4.3-fold at a rate of increase of 0.49 ng/ml/year and 0.42 ng/ml/year, respectively. In contrast, serum concentrations of PFOS reached a plateau in the late 1980s. There are also regional differences in both the PFOS and PFOA serum concentrations. The concentrations in serum [geometric mean (geometric standard deviation)] (ng/ml) in 2003-2004 ranged from 7.6(1.6) in the town of Matsuoka in Fukui prefecture to 27.8(1.6) in Kyoto city, and ranged from 2.3(1.5) in Matsuoka to 14.5(1.3) in Osaka city for PFOS and PFOA, respectively.     

Detection of dicofol and related pesticides in human breast milk from China, Korea and Japan

Previously, we demonstrated that the concentrations of DDTs were greater in breast milk collected from Chinese mothers than from Japanese and Korean mothers. To investigate dicofol as a possible source of the DDTs in human breast milk, we collected breast milk samples from 2007 to 2009 in China (Beijing), Korea (Seoul, Busan) and Japan (Sendai, Takarazuka and Takayama). Using these breast milk samples, we quantified the concentrations of dichlorobenzophenone, a pyrolysis product of dicofol (simply referred to as dicofol hereafter), dichlorodiphenyltrichloroethane and its metabolites (DDTs) using GC-MS. Overall, 12 of 14 pooled breast milk samples from 210 mothers contained detectable levels of dicofol (>0.1 ng g⁻¹ lipid). The geometric mean concentration of dicofol in the Japanese breast milk samples was 0.3 ng g⁻¹ lipid and significantly lower than that in Chinese (9.6 ng g⁻¹ lipid) or Korean breast milk samples (1.9 ng g⁻¹ lipid) (p < 0.05 for each). Furthermore, the ΣDDT levels in breast milk from China were 10-fold higher than those from Korea and Japan. The present results strongly suggest the presence of extensive emission sources of both dicofol and DDTs in China. However, exposure to dicofol cannot explain the large exposure of Chinese mothers to DDTs because of the trace levels of dicofol in the ΣDDTs. In the present study, dicofol was confirmed to be detectable in human breast milk. This is the first report to identify dicofol in human samples.     

Confirmation of polychlorinated biphenyl (PCB) distribution in the blood and verification of simple quantitative method for PCBs based on specific congeners

We measured the concentration of each polychlorinated biphenyl (PCB) congener in whole blood, plasma and blood cells, and investigated the distribution of PCBs in human blood using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). The PCB concentrations in plasma and whole blood in terms of lipid concentrations were almost equal, with a correlation coefficient of r = 0.972. In the blood, the ratio of PCBs in blood cells to those in plasma was generally about 1:9 and the congener distribution patterns in blood cells and plasma were similar.We performed verification of a simple mass screening method by obtaining information on the main PCB congeners for investigations on human accumulation and exposure. The total concentration of the seven PCB congeners (UNEP-7) proposed to the United Nations Environment Programme (UNEP) by Muir and Morita was about 50% of the total concentration of all PCB congeners, and UNEP-30 was about 80%. The seven main congeners in the blood (MCB-7) showed a value that was about 60%, and MCB-30 showed a value that was about 90%. Determinations with the main congeners in the blood showed a correlation of r = 0.990 or more between the main eight congeners (MCB-7 plus #74) and the total PCB concentration for all congeners. The results suggest that, although total PCB concentration can be effectively estimated from the main seven congeners, the main eight congeners would be preferable, and that the use of these congeners in the simple mass screening method would be effective for populations in areas uncontaminated by PCBs.     

Effect of different soil layers on porewater to remediate acidic surface environment at a close mine site

This paper describes the chemistry of porewater when constructing different soil layers on acidic weathered rock of a closed mine to remediate the surface environment. Three cases were set on a flat surface of the site, all under different layer systems. Case 1 was only composed of weathered rocks. A top neutralization layer was constructed on the weathered rocks in case 2, whereas both an upper low-permeable and middle neutralization layers were constructed on the weathered rocks in case 3. The low-permeable layer of 30?cm thick consists of clay, and the neutralization layer of 30?cm thick consists of the mixture of the weathered rock and calcium carbonate as a neutralizer. Porewater sampling systems and soil sensors to measure temperature, water content, and electrical conductivity were set at different depths. In case 1, steadily high concentrations of heavy metals were observed regardless of the depth, and the pH ranged from 2 to 4. In cases 2 and 3, a dramatic decrease in concentrations of heavy metals was observed, even below the neutralization layer. For both cases, pH values were circumneutral. There were no significant seasonable changes in heavy metals concentrations and pH of porewater by considering the temperature and precipitation. In addition, the water content of the layers in case 3 fluctuated more mildly than that in cases 1 and 2, indicating that the low-permeable layer reduced the rate of infiltration. Therefore, a significant reduction in the load of heavy metals released from the site can be achieved by both implementing neutralization and low-permeable layers.     

Rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass tar

The rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass tar was carried out in a hydrogen atmosphere at 1073 K and 973 K. The assumed oligomers were partially pyrolyzed epoxy resin with biomass tar as solvent for the resin. The product distributions obtained from rapid hydropyrolysis of phenol and bisphenol-A are shown. We also discuss the effects of reaction temperature and hydrogen partial pressure on the product yield. In particular, more phenol was produced from bisphenol-A at 973 K than at 1073 K. The yield of methane, which was the final hydropyrolysis product, increased with increasing hydrogen partial pressure, whereas benzene and phenol were believed to behave as intermediate products in the hydropyrolysis reaction. The results suggest that phenol could be obtained with high selectivity from tar by optimizing the reaction conditions.