Biodegradation kinetics of surfactants in seawater.

In this paper, a general kinetic model for degradation processes of surfactants is proposed. The model equation is v = K2S2 + K1S + K0, where v is the substrate consumption rate in the biodegradation process, S is the surfactant concentration in the medium and K2, K1, and K0 are kinetic constants. From this general expression, different simplified equations can be obtained (where K0 = 0; K2 and K0 = 0; K2 = 0; K2 and K1 = 0), which are representative of the process for different operating conditions. This model was tested by measuring the degradation of two different surfactants (Sodium dodecyl benzene sulfonate, LAS; and Sodium dodecyl sulfate, DSNa) under two different temperatures (5 and 20 degrees C). Values predicted by the model are close to experimental data obtained.     

Evaluation of the effect of different sampling time periods and ambient air pollutant concentrations on the performance of the Radiello diffusive sampler for the analysis of VOCs by TD-GC/MS

The effect of different sampling exposure times and ambient air pollutant concentrations on the performance of Radiello? samplers for analysis of volatile organic compounds (VOCs) is evaluated. Quadruplicate samples of Radiello? passive tubes were taken for 3, 4, 7 and 14 days. Samples were taken indoors during February and March 2010 and outdoors during July 2010 in La Canonja (Tarragona, Spain). The analysis was performed by automatic thermal desorption (ATD) coupled with capillary gas chromatography (GC)/mass spectrometry detection (MS). The results show significant differences (t-test, p < 0.05) between the amounts of VOCs obtained from the sum of two short sampling periods and a single equivalent longer sampling period for 65% of all the data. 17% of the results show significantly larger amounts of pollutant in the sum of two short sampling periods. Back diffusion due to changes in concentrations together with saturation and competitive effects between the compounds during longer sampling periods could be responsible for these differences. The other 48% of the results that are different show significantly larger amounts in the single equivalent longer sampling period. The remaining 35% of the results do not show significant differences. Although significant differences are observed in the amount of several VOCs collected over two shorter sampling intervals compared to the amount collected during a single equivalent longer sampling period, the ratios obtained are very close to unity (between 0.7 and 1.2 in 75% of cases). We conclude that Radiello? passive samplers are useful tools if their limitations are taken into account and the manufacturer's recommendations are followed.     

Study of the levels of N‐methylcarbamate pesticides in waters of the river Huelva

A study on the levels of N‐methylcarbamate pesticides and some degradation products in waters of the river Huelva was carried out. This river constitutes the main water supply of the city of Seville at the south west of Spain with a population of almost one million inhabitants. N‐methylcarbamates were extracted from the water by using C‐18 solid phase cartridges. High performance liquid chromatography with UV detection was used to carry out the determinations. Residues of carbaryl, methiocarb sulphoxide and α‐naphthol were found in some of the analysed water samples.     

Regional integration and local change: road paving, community connectivity, and social–ecological resilience in a tri-national frontier, southwestern Amazonia

Initiatives for global economic integration increasingly prioritize new infrastructure in relatively remote regions. Such regions have relatively intact ecosystems and provide valuable ecosystem services, which has stimulated debates over the wisdom of new infrastructure. Most prior research on infrastructure impacts highlights economic benefits, ecological damage, or social conflicts. We suggest a more integrative approach to regional integration by appropriating the concepts of connectivity from transport geography and social?Cecological resilience from systems ecology. Connectivity offers a means of observing the degree of integration between locations, and social?Cecological resilience provides a framework to simultaneously consider multiple consequences of regional integration. Together, they offer a spatial analysis of resilience that considers multiple dimensions of infrastructure impacts. Our study case is the southwestern Amazon, a highly biodiverse region which is experiencing integration via paving of the Inter-Oceanic Highway. Specifically, we focus on the ??MAP?? region, a tri-national frontier where Bolivia, Brazil, and Peru meet and which differs in the extent of highway paving. We draw on a tri-national survey of more than 100 resource-dependent rural communities across the MAP frontier and employ indicators for multiple dimensions of connectivity and social?Cecological resilience. We pursue a comparative analysis among regions and subregions with differing degrees of community connectivity to markets in order to evaluate their social?Cecological resilience. The findings indicate that connectivity and resilience have a multifaceted relationship, such that greater community connectivity corresponds to greater resilience in some respects but not others. We conclude by noting how our findings integrate those from heretofore largely disparate literatures on infrastructure. The integration of transport geography with resilience thought thus stands to advance the study of infrastructure impacts.     

Using solar and ultraviolet light to degrade PCBs in sand and transformer oils

The present study describes the effect of the operating variables in the sensitized solar photolysis of sandy sediments contaminated by polychlorinated biphenyls (PCBs) in alkaline isopropanol. PCBs were almost completely removed in two weeks with stoichiometric release of chloride and biphenyl (BP) by a mechanism of reductive dechlorination. The concentration of the sensitizer (acetone) was the variable found to have most influence on the process. Under the same conditions, only partial dechlorination of the PCBs (34%) was observed in dielectric fluids without generating biphenyl to any appreciable extent. Direct photolysis (ultraviolet light at 254nm) of dielectric oils dissolved in alkaline isopropanol lead to 92% removal of PCBs in 60min. The observed mechanism was again that of reductive dechlorination, with stoichiometric release of chloride, and the accumulation of biphenyl, quaterphenyl and condensation products of biphenyl with isopropanol.     

Cross-sectional biomonitoring study of pesticide exposures in Queensland,Australia, using pooled urine samples

A range of pesticides are available in Australia for use in agricultural and domestic settings to control pests, including organophosphate and pyrethroid insecticides, herbicides, and insect repellents, such as N,N-diethyl-meta-toluamide (DEET). The aim of this study was to provide a cost-effective preliminary assessment of background exposure to a range of pesticides among a convenience sample of Australian residents. De-identified urine specimens stratified by age and sex were obtained from a community-based pathology laboratory and pooled (n = 24 pools of 100 specimens). Concentrations of urinary pesticide biomarkers were quantified using solid-phase extraction coupled with isotope dilution high-performance liquid chromatography–tandem mass spectrometry. Geometric mean biomarker concentrations ranged from <0.1 to 36.8 ng/mL for organophosphate insecticides, <0.1 to 5.5 ng/mL for pyrethroid insecticides, and <0.1 to 8.51 ng/mL for all other biomarkers with the exception of the DEET metabolite 3-diethylcarbamoyl benzoic acid (4.23 to 850 ng/mL). We observed no association between age and concentration for most biomarkers measured but noted a “U-shaped” trend for five organophosphate metabolites, with the highest concentrations observed in the youngest and oldest age strata, perhaps related to age-specific differences in behavior or physiology. The fact that concentrations of specific and non-specific metabolites of the organophosphate insecticide chlorpyrifos were higher than reported in USA and Canada may relate to differences in registered applications among countries. Additional biomonitoring programs of the general population and focusing on vulnerable populations would improve the exposure assessment and the monitoring of temporal exposure trends as usage patterns of pesticide products in Australia change over time.     

Characterization and determination of the odorous charge in the indoor air of a waste treatment facility through the evaluation of volatile organic compounds (VOCs) using TD–GC/MS

Municipal solid waste treatment facilities are generally faced with odorous nuisance problems. Characterizing and determining the odorous charge of indoor air through odour units (OU) is an advantageous approach to evaluate indoor air quality and discomfort. The assessment of the OU can be done through the determination of volatile organic compounds (VOCs) concentrations and the knowledge of their odour thresholds. The evaluation of the presented methodology was done in a mechanical–biological waste treatment plant with a processing capacity of 245.000 tons year^?1 of municipal residues. The sampling was carried out in five indoor selected locations of the plant (Platform of Rotating Biostabilizers, Shipping warehouse, Composting tunnels, Digest centrifugals, and Humid pre-treatment) during the month of July 2011. VOC and volatile sulphur compounds (VSCs) were sampled using multi-sorbent bed (Carbotrap, Carbopack X, Carboxen 569) and Tenax TA tubes, respectively, with SKC AirCheck 2000 pumps. The analysis was performed by automatic thermal desorption (ATD) coupled with a capillary gas chromatography (GC)/mass spectrometry detector (MSD). One hundred and thirty chemical compounds were determined qualitatively in all the studied points (mainly alkanes, aromatic hydrocarbons, alcohols, aldehydes, esters, and terpenes), from which 86 were quantified due to their odorous characteristics as well as their potentiality of having negative health effects. The application of the present methodology in a municipal solid waste treatment facility has proven to be useful in order to determine which type of VOC contribute substantially to the indoor air odorous charge, and thus it can be a helpful method to prevent the generation of these compounds during the treatment process, as well as to find a solution in order to suppress them.     

Determining indoor air quality and identifying the origin of odour episodes in indoor environments

A methodology for identifying volatile organic compounds (VOC) and determining air quality of indoor air has been developed. The air samples are collected using pump samplers by the inhabitants when they perceive odorous and/or discomfort episodes. Glass multi-sorbent tubes are connected to the pump samplers for the retention of VOC. The analysis is performed by automatic thermal desorption (ATD) coupled with gas chromatography-mass spectrometry (GC/MS). This methodology can be applied in cases of sick building syndrome (SBS) evaluation, in which building occupants experience a series of varied symptoms that appear to be linked to time spent in the building. Chemical pollutants concentrations (e.g., VOC) have been described to contribute to SBS. To exemplify the methodology, a qualitative determination and an evaluation of VOC present were performed in a dwelling where the occupants experienced the SBS symptoms. Higher total VOC (TVOC) value was detected in episodes in indoor air (1.33 ( 1.53 mg/m3) compared to outdoor air (0.71 ( 0.46 mg/m3). The concentrations of individual VOCs, such as ethanol, acetone, isopropanol, 1-butanol, acetic acid, acetonitrile and 1-metoxy-2-propanol, were also higher than the expected for a standard dwelling. The external source of VOC was found to be a not declared activity of storage and manipulation of solvents located at the bottom of a contiguous building.