Renewable Resources in an Overlapping Generations Economy Without Capital

We incorporate a renewable resource into an overlapping generations model without capital and with quasi-linear preferences. Besides being an input for production the resource serves as a store of value. We characterize the dynamics, efficiency, and stability of the steady-state equilibria. The stability properties are sensitive to the type of resource growth. For constant growth there is only one steady-state equilibrium which is stable and efficient. In the general case of the concave growth function, there are usually at least two steady-state equilibria, one of which is stable and the other one unstable. The unstable steady state is efficient, but the stable one may or may not be. We study the robustness of our results by assuming a logarithmic utility function. We show that for the Cobb–Douglas production function the steady state is unique and stable regardless of whether the equilibrium is efficient or inefficient. Our analytical results are illustrated by numerical calculations.     

Characterization of organic compounds in aerosol particles from a coniferous forest by GC-MS

Atmospheric aerosol particles were collected in a Finnish Scots pine forest as part of a European Union project. Sampling was done in March-April 2003 with a high-volume sampler. Dynamic ultrasonic-assisted solvent extraction and gas chromatography-mass spectrometry (GC-MS) were applied to the analysis of aerosol samples for analytes such as n-alkanes, polycyclic aromatic hydrocarbons (PAH), oxidized polycyclic aromatic hydrocarbons (oxy-PAHs), sesquiterpenes (SQT) and oxidized sesquiterpenes (oxy-SQT). The highest concentrations were found for the n-alkanes, which were present in a wide range (C11-C32) indicating both biogenic and anthropogenic sources. PAH compounds were found in every sample while oxy-PAH compounds were present in low concentrations in a few samples. A few oxidized monoterpenes, most notably (-)-verbenone and pinonaldehyde, were found in several samples in concentrations clearly exceeding the PAH concentrations. The effect of temperature could be seen in most samples, where the concentrations of n-alkanes declined with decreasing temperatures. Particle formation events were accompanied by higher concentrations of heavy n-alkanes, verbenone and pinonaldehyde.     

Management of process performance at low water temperatures in respect of filamentous organisms

The management of sludge-settling properties in Nordic conditions is of importance during the low temperature (spring) season because of the peak settler load. A survey was made in 10 Finnish waste water treatment plants(WWTP‘ s) and the total extended filament length and DSVI in haft of the plants exceeded the limits, which indicates sludge bulking( 15 km/g SS and 150 ml/g respectively). The dominant organism was Microthrix parvicella, the abundance of which was 59.22% of total extended filament length on average.Chemicals were tested to control the filaments, and it was found that special attention has to be paid to maintaining the nitrification at low temperature. A dosage of(H2O2-besed) oxidants controlled the growth of Microthrix parvicella effectively and rapidly, whereas with the use of aluminium hydroxidechloride a 2 to 5-week period was needed to decrease the filament length.     

Influence of no-tillage on the distribution and lability of phosphorus in Finnish clay soils

No-tillage (NT) is a method adopted to reduce erosion and particulate phosphorus (P) load from arable land to watercourses. However, it has been found to increase the loss of dissolved P with surface runoff, but the reasons for that have rarely been examined in detail. The objective of the present study was to determine the chemical factors explaining this response by investigating the impact of NT on the type and distribution of P reserves as well as on organic carbon (C) in the 0–35 cm topsoil layer of clay soil profiles (Vertic Cambisols). Soil samples were taken from two experimental fields (Jokioinen and Aurajoki) at 0–5, 5–20 and 20–35 cm depths in conventionally tilled (CT) and non-tilled (for 4–5 years) plots. The plots had been cultivated and fertilized according to the common field practices in Finland (15–18 kg P and 100–128 kg N ha⁻¹ year⁻¹).Inorganic and organic P reserves characterized by a modified Chang and Jackson fractionation procedure were not significantly affected by the cultivation methods. However, in the uppermost soil layer (0–5 cm) in NT of the Jokioinen field, the labile P determined by water extraction (P_w) increased significantly, whereas the increase in P extracted with acid ammonium acetate (P_AAC) remained statistically insignificant. The increase in labile P coincided with a significant increase in organic carbon (C), which supports the theory that competition between organic anions and phosphate for the same sorption sites on oxide surfaces will enhance the lability of soil P. In the Aurajoki field with distinct soil cracking, P_w and P_AAC were not affected by NT in the uppermost soil layer, but they increased in the deepest soil layer (20–35 cm) concomitantly with an increase in Al-bound P and organic C. However, the increases were not statistically significant. In both fields, soil acidification due to the repeated application of N fertilizers at a shallow soil depth as well as the accumulation of organic C lowered pH of the uppermost soil layer in NT compared to the deeper soil layers. The results indicated that even short-term NT can increase the labile P in clay soil. However, further studies are needed to assess the long-term changes in lability of surface soil P and, consequently, the possible need for readjustment of the fertilization level in NT.     

Flow cytometric method to measure urea-resistant alkaline phosphatase from blood neutrophils for use in the prenatal screening of Down's syndrome

The histochemical measurement of urea-resistant alkaline phosphatase from maternal blood neutrophils is known to have a high detection rate for the prenatal detection of Down's syndrome pregnancies. However, because the histochemical method is laborious and subjective to use, it has not gained widespread acceptance in prenatal screening programmes. We present a simple and objective method for the measurement of urea-resistant alkaline phosphatase by flow cytometry. The method should allow the design of larger studies aimed at evaluating the role of neutrophil urea-resistant alkaline phosphatase in the prenatal screening for Down's syndrome.     

为了有效地控制波罗的海的污染:对当前一些污染减排政策失败的剖析及建议

我们应用生态-经济学模型,研究了波罗的海国家关于将每一个国家的营养物质排放总量减少一半的宣言.这一模型包括以国家为基础的减排污染物费用函数和描述磷和氮如何从一国流动到另一国的转移系数(由波罗的海水文学模型估算而得).结果表明,就氮而言,目前的减排政策和成本一效益政策相比,减排费用非常高,而且各国受益不平衡.可以预料,那些减排边际成本高的国家,其执行上述减排协定以及对氮的减排投资的兴趣不会太大,这一结论已被我们的数据所证实=因此,我们建议并概要地提出一种联合执行政策,以使减排具有成本效益并鼓励进行减排投资.     

Inherent occupational health assessment during basic engineering stage

Each year more people die from work-related diseases than are killed in industrial accidents. Therefore it is essential to evaluate occupational health aspect during the process design. Early evaluation of safety, health, and environmental (SHE) performance is advantageous, since the opportunities to make the process inherently benign are greater and the cost therefore lower. The methods for occupational health assessments need to be tailored to specific design stages, since the data availability is changing as the design proceeds. In this paper, an index-based method called the Occupational Health Index (OHI) is presented for the basic engineering stage. The OHI is the final of the three methods in series proposed for health assessment in development and design stages. The OHI is based on the information available in piping and instrumentation diagrams (PIDs) and the plot plan. Four health aspects are considered; chronic inhalation risks to noncarcinogens and carcinogens, acute inhalation risk, and dermal/eye risk. The index is demonstrated on separation system of a toluene hydrodealkylation process. The assessment results allow the level of occupational health risks to be evaluated, the sources of exposures be detected, and corrective actions taken in a focused way.     

Inherent occupational health assessment during preliminary design stage

Chemical process routes can already be assessed as early as in the development and design phases. Process screening should not look at economic and technical aspects only, but also the safety, health, and environmental performances. In this paper, a method called the Health Quotient Index (HQI) is presented for the preliminary process design phase. The HQI provides a simple approach to quantify workers' health risk from exposure to fugitive emissions e.g. in petrochemical plants. The method utilizes process data from flow sheet diagram, which is already available at the preliminary design stage. Since the mechanical details of the process are still unknown, a database of the precalculated fugitive emissions for typical operations in chemical plants was created to simplify the assessment. The HQI can be used to rank alternative process concepts or to quantify the risk level of processes. As a case study, six process routes for producing methyl methacrylate are discussed. Three health indexes are compared in the case study. The HQI is able to highlight the difference of hazard levels between the routes better as a result of more detailed assessment of the exposures.     

Estimation of chemical concentration due to fugitive emissions during chemical process design

Fugitive emissions are not an environmental concern alone, but are also a health concern. From occupational health standpoint, fugitive emissions are the main sources of origin of the continuous exposure to workers. Operating plants regularly measure release and concentration levels through a plant-monitoring program. However, for processes which are still ‘on paper’, predictive estimation methods are required. Therefore, three methods for estimating concentration of the fugitive emissions are presented for the process development and design phases of petrochemical processes. The methods estimate the fugitive emission rates and plant plot dimensions resulting to fugitive emission concentrations. The methods were developed for the type and amount of information available in three process design stages; conceptual design, preliminary process design, and detailed process design. The methods are applied on a real benzene plant; the estimated benzene concentrations are compared to the actual concentration measured at the plant. The results show that as the information mounts up during design, the concentration estimate becomes more accurate. The results indicate that the methods presented provide simple estimates of fugitive emission-based concentrations during the design stages.     

Occupational chemical exposure and risk estimation in process development and design

Each year more people die from diseases caused by work than are killed in industrial accidents. Therefore, methods are needed to evaluate occupational health hazards as early as possible when the process is still under development. A method for estimating inhalative exposures and risks in petrochemical and related plants is presented. The method is simple and suffices with the limited data availability during the early design stages.The steps of the method, which utilizes preliminary process flow diagrams are as follows: first the fugitive emissions and process plot areas are estimated based on precalculated process modules representing the typical process sections (such as a distillation unit). Chemical concentration in the air is then calculated based on the wind velocity probability and the estimated process cross-sectional area. For this purpose a typical wind velocity distribution in the area is used. The worker risk of exposure to chemicals is evaluated either based on the concentration in air by using the hazard quotient method or calculating the carcinogenic chemicals intake and the resulting risk of cancer. The values are compared to the benchmarks.As a result the process route health characteristics such as fugitive emissions rate, critical wind speed, chemical concentration in air and intake amount as well as the corresponding risk of exposure are produced. By using statistical meteorological data, health risks of occupational exposure can be estimated more realistically as probabilities. The approach is capable of comparing alternative processes to select the concept which is inherently occupationally healthier. Using this method, the exposure problems of a process can be identified earlier and proper decisions can be made early in process development or predesign stage.The concentration-based method is demonstrated by a case study of six competing manufacturing routes for methyl methacrylate (MMA). The C3 is found to be the most harmful alternative to health. Both concentration-based and intake-based methods are applied. The study indicates that the intake-based risk estimation benchmark is stricter than the exposure limit-based benchmark for carcinogens.