Assessment of visual landscape quality using IKONOS imagery

The assessment of visual landscape quality is of importance to the management of urban woodlands. Satellite remote sensing may be used for this purpose as a substitute for traditional survey techniques that are both labour-intensive and time-consuming. This study examines the association between the quality of the perceived visual landscape in urban woodlands and texture measures extracted from IKONOS satellite data, which features 4-m spatial resolution and four spectral bands. The study was conducted in the woodlands of Istanbul (the most important element of urban mosaic) lying along both shores of the Bosporus Strait. The visual quality assessment applied in this study is based on the perceptual approach and was performed via a survey of expressed preferences. For this purpose, representative photographs of real scenery were used to elicit observers’ preferences. A slide show comprising 33 images was presented to a group of 153 volunteers (all undergraduate students), and they were asked to rate the visual quality of each on a 10-point scale (1 for very low visual quality, 10 for very high). Average visual quality scores were calculated for landscape. Texture measures were acquired using the two methods: pixel-based and object-based. Pixel-based texture measures were extracted from the first principle component (PC1) image. Object-based texture measures were extracted by using the original four bands. The association between image texture measures and perceived visual landscape quality was tested via Pearson’s correlation coefficient. The analysis found a strong linear association between image texture measures and visual quality. The highest correlation coefficient was calculated between standard deviation of gray levels (SDGL) (one of the pixel-based texture measures) and visual quality (r?=?0.82, P?<?0.05). The results showed that perceived visual quality of urban woodland landscapes can be estimated by using texture measures extracted from satellite data in combination with appropriate modelling techniques.     

Study of a winter PM episode in Istanbul using the high resolution WRF/CMAQ modeling system

High winter-time PM₁₀, sulfate, nitrate and ammonium levels in Istanbul were investigated using a high resolution WRF/CMAQ mesoscale model system. A model-ready anthropogenic emission inventory on 2 km spatial resolution was developed for the area and the present study is the first attempt to test these emissions. The results suggested that the system was capable of producing the magnitudes. PM₁₀ levels calculated by the model underestimated the observations with an average of 10 per cent at Bogazici University sampling station, whereas an overestimation of 12 per cent is calculated for all stations. High uncertainties, particularly in traffic and coal combustion, led to over estimations around emission hot spots. Base case results together with the sensitivity studies pointed significant contribution of local sources, pointing to the need of control strategies focusing on primary particulate emissions.     

The release of lindane from contaminated building materials

The release of the organochlorine pesticide lindane (γ-hexachlorocyclohexane) from several types of contaminated building materials was studied to assess inhalation hazard and decontamination requirements in response to accidental and/or intentional spills. The materials included glass, polypropylene carpet, latex-painted drywall, ceramic tiles, vinyl floor tiles, and gypsum ceiling tiles. For each surface concentration, an equilibrium concentration was determined in the vapour phase of the surrounding air. Vapor concentrations depended upon initial surface concentration, temperature, and type of building material. A time-weighted average (TWA) concentration in the air was used to quantify the health risk associated with the inhalation of lindane vapors. Transformation products of lindane, namely α-hexachlorocyclohexane and pentachlorocyclohexene, were detected in the vapour phase at both temperatures and for all of the test materials. Their formation was greater on glass and ceramic tiles, compared to other building materials. An empiric Sips isotherm model was employed to approximate experimental results and to estimate the release of lindane and its transformation products. This helped determine the extent of decontamination required to reduce the surface concentrations of lindane to the levels corresponding to vapor concentrations below TWA.     

The anaerobic biodegradability of municipal sludge and fat, oil, and grease at mesophilic conditions.

The anaerobic biodegradability of municipal primary and secondary sludge with increasing levels of partially dewatered fat, oil, and grease (FOG) was assessed using a mixed methanogenic culture at 35 "C. Under batch conditions with an acclimated and enriched microbial population, the sludge loading was 3 kg volatile solids/m3 and the highest FOG loading tested was 1.5 kg volatile solids/m3, resulting in a methane yield of 245 mL methane/g sludge volatile solids added at 35 degrees C and 1010 mL methane/g FOG volatile solids added at 35 degrees C. Under semicontinuous feeding conditions, the sludge and sludge plus FOG loading tested were 3 and 3.75 kg volatile solids/m3-d, respectively. Within 23 days of operation, the volatile fatty acid concentrations were reduced below 200 mg chemical oxygen demand/L (187 mg/L as acetic acid). Enhancement of sludge digestion was observed in those reactors where codigestion of sludge and FOG took place, which was attributed to a higher level of microbial activity maintained in these reactors as a result of FOG degradation. The results of this study demonstrate that beneficial use of FOG through codigestion with municipal sludge is feasible.     

Annual and intradiurnal variation of dominant airborne pollen and the effects of meteorological factors in Çeşme (Izmir,Turkey)

In this present study, airborne pollen in Çe?me was investigated between February 17, 2012 and February 17, 2014 using the volumetric method. Çe?me, one of Turkey’s most important tourism centers, which attracts numerous local and foreign tourists each year, is a district of Izmir, a province in the western part of Turkey. During the 2-year study, 12,905 pollen grains belonging to 64 taxa (33 arboreal, 31 non-arboreal plants) were detected. However, the 2-year data results revealed that the taxa with the pollen concentration more than 4% in the atmosphere were Cupressaceae/Taxaceae (4268 pollen, 33.07%), Olea europaea (1614 pollen grains, 12.51%), Pinaceae (1085 pollen grains, 8.41%), Quercus spp. (1081 pollen grains, 8.38%), Pistacia spp. (743 pollen grains, 5.76%), and Poaceae (557 pollen grains, 4.32%), all of which comprised 72.44% of the total count. The relationship between the daily pollen counts belonging to these six taxa and the hourly average temperature (°C), daily precipitation (mm), relative humidity (%), and wind speed (km/h) was assessed using the Spearman correlation test, and significant results were determined. During the study, the intradiurnal distribution of the aforementioned pollen varied. The highest pollen concentration was detected between 11:00 a.m. and 6:00 p.m. (first year 30.3%; second year 30.1%).     

Assessment of imidacloprid toxicity on reproductive organ system of adult male rats

In the current study it was aimed to investigate the toxicity of low doses of imidacloprid (IMI) on the reproductive organ systems of adult male rats. The treatment groups received 0.5 (IMI-0.5), 2 (IMI-2) or 8 mg IMI/kg body weight by oral gavage (IMI-8) for three months. The deterioration in sperm motility in IMI-8 group and epidydimal sperm concentration in IMI-2 and IMI-8 groups and abnormality in sperm morphology in IMI-8 were significant. The levels of testosterone (T) and GSH decreased significantly in group IMI-8 compared to the control group. Upon treatment with IMI, apoptotic index increased significantly only in germ cells of the seminiferous tubules of IMI-8 group when compared to control. Fragmentation was striking in the seminal DNA from the IMI-8 group, but it was much less obvious in the IMI-2 one. IMI exposure resulted in elevation of all fatty acids analyzed, but the increases were significant only in stearic, oleic, linoleic and arachidonic acids. The ratios of 20:4/20:3 and 20:4/18:2 were decreased and 16:1n-9/16:0 ratio was increased. In conclusion, the present animal experiments revealed that the treatment with IMI at NOAEL dose-levels caused deterioration in sperm parameters, decreased T level, increased apoptosis of germ cells, seminal DNA fragmentation, the depletion of antioxidants and change in disturbance of fatty acid composition. All these changes indicate the suppression of testicular function.     

Anaerobic biotransformation and methane generation potential of cheese whey in batch and UASB reactors.

Anaerobic treatability and methane generation potential of cheese whey were determined in batch reactors. Furthermore, the effect of nutrient and trace metal supplementation on the batch anaerobic treatment, and the high-rate anaerobic treatability of cheese whey in upflow anaerobic sludge blanket (UASB) reactors were investigated. To this purpose biochemical methane potential experiments were conducted and single- and two-stage UASB reactors with granular cultures were operated. In UASB experiments significance of process staging, operational parameters such as hydraulic retention time (HRT), influent chemical oxygen demand (COD) concentration and loading rate were also investigated. The results revealed that nutrient and trace metal supplementation is vital for the anaerobic treatment of cheese whey; the anaerobic methane generation for the cheese whey studied was found to be 424 ml CH4/g COD (23.4 1 CH4/l cheese whey); undiluted cheese whey could be treated anaerobically at relatively short HRT values (2.06-4.95 days) without any significant stability problems; HRT values as low as 2-3 days can be used for the anaerobic treatment of cheese whey, with a COD removal efficiency of 95-97% at influent COD concentration of 42 700 +/- 141-55 100 +/- 283 mg/l.     

Sequential (anaerobic/aerobic) biological treatment of Dalaman SEKA Pulp and Paper Industry effluent

In the pulp and paper industry, lignin and other color compounds are removed by chemical agents in bleaching process. Use of chlorine-based agents results in production of degradation products which include various chloro-organic derivatives. Since these new compounds are highly chlorinated, they cause a problem in the treatment of pulp and paper industry wastewaters. Chemical precipitation, lagooning, activated sludge, and anaerobic treatment are the processes used for treating pulp and paper effluents. Furthermore, a combination of these processes is also applicable. In this study, the effluent of Dalaman SEKA Pulp and Paper Industry was examined for its toxic effects on anaerobic microorganisms by anaerobic toxicity assay. Additionally, this wastewater was applied to a sequential biotreatment process consisting of an upflow anaerobic sludge blanket as the anaerobic stage and a once-through completely mixed stirred tank as the aerobic stage. Results indicated that: (1) Dalaman SEKA Pulp and Paper Industry wastewater exerted no inhibitory effects on the anaerobic cultures under the studied conditions, and (2) application of a sequential biological (anaerobic/aerobic) system to treat the Dalaman SEKA Pulp and Paper Industry wastewater resulted in approximately 91% COD and 58% AOX removals at a HRT of 5 and 6.54 h for anaerobic and aerobic, respectively.     

Removal of phenol from aqueous solutions by adsorption

Experiments have been conducted to examine the liquid-phase adsorption of phenol from water by silica gel, HiSiv 3000, activated alumina, activated carbon, Filtrasorb-400, and HiSiv 1000. Experiments were carried out for the analysis of adsorption equilibrium capacities and kinetics. The adsorption isotherm model of the Langmuir-Freundlich type was the best to describe adsorption equilibrium data for phenol for the adsorbents studied. Results of kinetic experiments indicated that HiSiv 1000 had the highest rate of adsorption among the adsorbents studied and therefore more detailed studies were carried out with this adsorbent. The influence of particle size, temperature, and thermal regeneration on adsorption of phenol by HiSiv 1000 was evaluated. From particle size experiments it appeared that adsorption capacity of HiSiv 1000 did not change by changing the particle size, but the rate of adsorption decreased considerably by increasing the particle size. The effect of temperature on adsorption was studied by determining equilibrium isotherms for HiSiv 1000 at 25, 40, and 55 degrees C. The results showed that adsorption capacity decreased with increasing temperature. Thermal regeneration of HiSiv 1000 was performed at 360 degrees C. It was observed that adsorption capacity of HiSiv 1000 did not change after 14 regeneration cycles. Equilibrium experiments showed that the adsorption capacities of activated carbon and Filtrasorb-400 were several times higher than that of HiSiv 1000.