Preparation and characterization of green bricks using pharmaceutical industrial wastes

This paper reports on recycling of industrial wastes (three pharmaceutical industrial sludges) into environmental friendly value-added materials. Stabilization/Solidification (S/S or bricks) process was applied to make a safer way for the utilization of pharmaceutical waste. The additives in this study include binders (cement, lime and bentonite) and strengthening material (pulverized fuel ash (PFA), silica fume and quarry dust) was used at different compositions. Bricks were cured for 28 days, and the following analysis-like compressive strength, leachability of heavy metals, mineralogical phase identity by X-ray diffraction (XRD) spectroscopy, Fourier transform infrared spectroscopy (FTIR) and thermal behaviour by thermogravimetric-differential thermal analysis (TG-DTA) had done. All the bricks were observed to achieve the standard compressive strength as required for construction according to BIS standards. Metal concentration in the leachate has reached the dischargeable limits according to Brazilian standards. Results of this study demonstrate that production of bricks is a promising and achievable productive use of pharmaceutical sludge.     

In vitro cytotoxicity of multi-wall carbon nanotubes on human cell lines

The aim of this study was to evaluate the in vitro toxicity of two multi-wall carbon nanotubes on four different cell lines: human alveolar epithelial (A549) cells, hepatocytes (Hep 3B cells), human embryonic kidney cells, and intestinal (P407 cells) cells. The adverse effects of carbon nanoparticles were analyzed after 24 h incubation with different cell lines using the trypan blue dye exclusion method. Incubation of carbon nanotubes with different cells produced a concentration-dependent inhibition of growth of the cells. The TC₅₀ or IC₅₀ values (toxic concentration 50, i.e., concentration of particles inducing 50% cell mortality) of two nanoparticles were (1) found to be in the range 23.5–30.5 µg mL^?1, and (2) less than that of quartz (known toxic agent, 28.8–66.9 µg mL^?1), indicating the greater cytotoxic effect of carbon nanoparticles than quartz particles.     

Single walled carbon nanotubes induce cytotoxicity and oxidative stress in HEK293 cells

The aim of the present study was to evaluate the potential toxicity and general mechanisms involved in single walled carbon nanotubes (SWCNTs)-induced cytotoxicity using human embryonic kidney cell line (HEK293) cells. Carbon nanotubes (coded as CNT) used in this study were synthesized by the chemical vapor deposition method. To elucidate the possible mechanisms underlying SWCNT-induced cytotoxicity, cell viability, cell membrane damage (lactate dehydrogenase activity (LDH) assay), reduced glutathione (GSH), interleukin-8 (IL-8) and lipid peroxidation products levels were quantitatively assessed following SWCNT exposure for 48 hr using HEK293 cells. Exposure of cells to SWCNT at 3–300 μg/ml produced significant reduction in cell viability in a concentration-dependent manner. The IC₅₀ value of SWCNT was found to be 87.58 μg/ml. Exposure of HEK cells to SWCNT at 10–100 μg/ml resulted in concentration-dependent cell membrane damage, increased production of IL-8, elevated levels of thiobarbituric acid reactive substances like malondialdehyde and decreased intracellular GSH levels. In summary, exposure to SWCNT resulted in a concentration-dependent cytotoxicity in cultured HEK293 cells that was associated with increased oxidative stress.     

Effect of operational parameters on heavy metal removal by electrocoagulation

In the present paper, the performance of electrocoagulation (EC) for the treatability of mixed metals (chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), and zinc (Zn)) from metal plating industrial wastewater (EPW) has been investigated. The study mainly focused on the affecting parameters of EC process, such as electrode material, initial pH, distance between electrodes, electrode size, and applied voltage. The pH 8 is observed to be the best for metal removal. Fe–Fe electrode pair with 1-cm inter-electrode distance and electrode surface area of 40 cm² at an applied voltage of 8 V is observed to more efficient in the metal removal. Experiments have shown that the maximum removal percentage of the metals like Cr, Ni, Zn, Cu, and Pb are reported to be 96.2, 96.4, 99.9, 98, and 99.5 %, respectively, at a reaction time of 30 min. Under optimum conditions, the energy consumption is observed to be 51.40 kWh/m³. The method is observed to be very effective in the removal of metals from electroplating effluent.     

Hydrogen storage studies on palladium-doped carbon materials (AC,CB, CNMs) @ metal–organic framework-5

Metal organic frameworks (MOFs) are a rapidly growing class of porous materials and are considered as best adsorbents for their high surface area and extraordinary porosity. The MOFs are synthesized by using various chemicals like triethylamine, terepthalic acid, zinc acetate dihydrate, chloroform, and dimethylformamide (DMF). Synthesized MOFs are intercalated with palladium/activated carbon, carbon black, and carbon nanomaterials by chemical reduction method for the purpose of enhancing the hydrogen adsorption capacities. We have observed that the palladium doped activated carbon on MOF-5 showed high hydrogen storage capacity. This may be due to the affinity of the palladium toward hydrogen molecule. The samples are characterized by X-ray diffraction, scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) surface area analysis. We have observed a clear decrease in the BET surface area and pore volume. The obtained results show a better performance for the synthesized sample. To our best knowledge, no one has reported the work on palladium-doped carbon materials (activated carbon, carbon black, carbon nanomaterials) impregnated to the metal–organic framework-5. We have attempted to synthesize carbon nanomaterials using indigenously fabricated chemical vapor deposition (CVD) unit as a support. We have observed an increase in the hydrogen storage capacities.     

Hydrogen production using thermocatalytic decomposition of methane on Ni<Subscript>30</Subscript>/activated carbon and Ni<Subscript>30</Subscript>/carbon black

Hydrogen is an energy carrier of the future need. It could be produced from different sources and used for power generation or as a transport fuel which mainly in association with fuel cells. The primary challenge for hydrogen production is reducing the cost of production technologies to make the resulting hydrogen cost competitive with conventional fuels. Thermocatalytic decomposition (TCD) of methane is one of the most advantageous processes, which will meet the future demand, hence an attractive route for CO_x free environment. The present study deals with the production of hydrogen with 30 wt% of Ni impregnated in commercially available activated carbon and carbon black catalysts (samples coded as Ni₃₀/AC and Ni₃₀/CB, respectively). These combined catalysts were not attempted by previous studies. Pure form of hydrogen is produced at 850 °C and volume hourly space velocity (VHSV) of 1.62 L/h g on the activity of both the catalysts. The analysis (X-ray diffraction (XRD)) of the catalysts reveals moderately crystalline peaks of Ni, which might be responsible for the increase in catalytic life along with formation of carbon fibers. The activity of carbon black is sustainable for a longer time compared to that of activated carbon which has been confirmed by life time studies (850 °C and 54 sccm of methane).     

Techniques for the evaluation of maturity for composts of industrially contaminated lake sediments

Composting was applied as a bioremediation methodology for the reclamation of dredged sediments of Isnapur, Khazipally and Gandigudem lakes polluted with industrial wastes. The present study is an attempt to elaborate upon organic matter transformations and define the parameters for product maturity adapting chemical and spectroscopic methods during composting. The stability and maturity of sediments were evaluated by assessing parameters like C/N ratio, nitrification index (NH(4)-N/NO(3)-N), water-soluble organic carbon concentration, CO(2) evolution rate, cation exchange capacity and indices such as humification index, E4/E6 ratio, compost mineralization index (ash content/oxidizable carbon), germination index, dehydrogenase, polyphenoloxidase activities and FTIR spectroscopy. The results showed that the changes in the above chemical and biological parameters can be employed as reliable indicators of stability and maturity. The FTIR spectra revealed enrichment in the aromatic groups and a degradation of the aliphatic groups indicating stabilization of the final compost.     

Mixotrophic cultivation of microalgae using industrial flue gases for biodiesel production

In the present study, an attempt has been made to grow microalgae Scenedesmus quadricauda, Chlorella vulgaris and Botryococcus braunii in mixotropic cultivation mode using two different substrates, i.e. sewage and glucose as organic carbon sources along with flue gas inputs as inorganic carbon source. The experiments were carried out in 500 ml flasks with sewage and glucose-enriched media along with flue gas inputs. The composition of the flue gas was 7 % CO₂, 210 ppm of NO _x and 120 ppm of SO _x . The results showed that S. quadricauda grown in glucose-enriched medium yielded higher biomass, lipid and fatty acid methyl esters (FAME) (biodiesel) yields of 2.6, 0.63 and 0.3 g/L, respectively. Whereas with sewage, the biomass, lipid and FAME yields of S. quadricauda were 1.9, 0.46, and 0.21 g/L, respectively. The other two species showed closer results as well. The glucose utilization was measured in terms of Chemical Oxygen Demand (COD) reduction, which was up to 93.75 % by S. quadricauda in the glucose-flue gas medium. In the sewage-flue gas medium, the COD removal was achieved up to 92 % by S. quadricauda. The other nutrients and pollutants from the sewage were removed up to 75 % on an average by the same. Concerning the flue gas treatment studies, S. quadricauda could remove CO₂ up to 85 % from the flue gas when grown in glucose medium and 81 % when grown in sewage. The SO _x and NO _x concentrations were reduced up to 50 and 62 %, respectively, by S. quadricauda in glucose-flue gas medium. Whereas, in the sewage-flue gas medium, the SO _x and NO _x concentrations were reduced up to 45 and 50 %, respectively, by the same. The other two species were equally efficient however with little less significant yields and removal percentages. This study laid emphasis on comparing the feasibility in utilization of readily available carbon sources like glucose and inexpensive leftover carbon sources like sewage by microalgae to generate energy coupled with economical remediation of waste. Therefore on an industrial scale, the sewage is more preferable. Because the results obtained in the laboratory demonstrated both sewage and glucose-enriched nutrient medium are equally efficient for algae cultivation with just a slight difference. Essentially, the sewage is cost effective and easily available in large quantities compared to glucose.