Bioleaching of copper from large printed circuit boards for synthesis of organic-inorganic hybrid

Environmental Science and Pollution Research - The present study described a process for copper (Cu) bioleaching from waste printed circuit boards (PCBs). The 45 (±?0.18) mg/g Cu was...     

Biomonitoring of heavy metals by pollen in urban environment

Abstract Industrial development and consumption of petroleum products leads to increase air pollution levels especially in urban and industrial areas. Heavy metal components associated with air pollutants have far reaching effects with respect to economic and ecological importance of pollens. The pollens are male reproductive organs of the plant and travel through air from flower to flower for pollination purpose. During this period they are exposed to air pollutants. Present investigation thus pertains to study of effect of air pollutants on pollens especially biosorption and bioaccumulation of heavy metals. The pollens of three commonly occurring plants namely Cassia siamea, Cyperus rotundus, Kigelia pinnata have been studied from the NH-6 of Nagpur city, India. The pollens exposed to polluted air showed the presence of higher concentrations of Ca, Al and Fe as compared to unexposed pollens. Higher concentration of these metals was observed in Cyperus rotundus followed by Cassia siamea and Kigelia pinnata. These results indicate that pollens act as good indicator of air pollution giving results in short time of exposure of 5–10 h. Apart from this, it is also reported that some of these metals play crucial role in the metabolic activity in pollens for example Calcium is necessary for growth of pollen tube and other metabolic activities in pollens. The presence of these metals in pollens may also enhance the allergenicity of the pollens. Similarly accumulation of heavy metals may also deteriorate the quality of pollen for their economical use. The viability of pollen is also affected by these pollutants in sensitive species leading to impairment of their fertility.     

A GFP-based bacterial biosensor with chromosomally integrated sensing cassette for quantitative detection of Hg(II) in environment

A mercury biosensor was constructed by integrating biosensor genetic elements into E. coli JM109 chromosome in a single copy number, using the attP/attB recombination mechanism of λphage. The genetic elements used include a regulatory protein gene (merR) along with operator/promoter (O/P) derived from the mercury resistance operon from pDU1358 plasmid of Serratia marcescens. The expression of reporter gene gfp is also controlled by merR/O/P. Integration of the construct into the chromosome was done to increase the stability and precision of the biosensor. This biosensor could detect Hg(II) ions in the concentration range of 100-1700 nmol/L, and manifest the result as the expression of GFP. The GFP expression was significantly different (P ≤ 0.05) for each concentration of inducing Hg(II) ions in the detection range, which reduces the chances of misinterpretation of results. A model using regression method was also derived for the quantification of the concentration of Hg(II) in water samples.     

Removal of arsenic from water by electrocoagulation

In the present study electrocoagulation (EC) has been evaluated as a treatment technology for arsenite [As(III)] and arsenate [As(V)] removal from water. Laboratory scale experiments were conducted with three electrode materials namely, iron, aluminum and titanium to assess their efficiency. Arsenic removal obtained was highest with iron electrodes. EC was able to bring down aqueous phase arsenic concentration to less than 10 microgl(-1) with iron electrodes. Current density was varied from 0.65 to 1.53 mAcm(-2) and it was observed that higher current density achieved rapid arsenic removal. Experimental results at different current densities indicated that arsenic removal was normalized with respect to total charge passed and therefore charge density has been used to compare the results. Effect of pH on arsenic removal was not significant in the pH range 6-8. Comparative evaluation of As(III) and As(V) removal by chemical coagulation (with ferric chloride) and electrocoagulation has been done. The comparison revealed that EC has better removal efficiency for As(III), whereas As(V) removal by both processes was nearly same. The removal mechanism of As(III) by EC seems to be oxidation of As(III) to As(V) and subsequent removal by adsorption/complexation with metal hydroxides generated in the process.     

Diversity of birds at Panipat refinery, Haryana (India)

Avifaunal study was carried out in Panipat refinery area before and after commissioning. A total of 63 birds were observed during the study, of which 39 and 49 birds were present during 1992 and 2001 respectively. Of these, 25 birds were common during both the study period. Blue rock pigeon was most dominant during 1992 whereas house sparrow was dominant during 2001. Species diversity index was found to be 5.26 and 6.64 in respective years. Jaccard's and Sorenson similarity indices were 0.40 and 0.57 respectively. Majority of birds were insectivorous in habits followed by granivorous birds in 1992 and piscivorous birds in 2001. The study reveals that less diversity was observed in 1992 when Panipat refinery was commissioned, but more birds especially aquatic ones were observed after the commissioning of the refinery. This has been attributed to increase in birds habitats due to developments of wetlands in and outside refinery, development of green belt around refinery and increase in green cover of area due to boosting of agroforestry and social forestry.     

Treatment of wastewater by electrocoagulation: a review

The electrocoagulation (EC) process is an electrochemical means of introducing coagulants and removing suspended solids, colloidal material, and metals, as well as other dissolved solids from water and wastewaters. The EC process has been successfully employed in removing pollutants, pesticides, and radionuclides. This process also removes harmful microorganisms. More often during EC operation, direct current is applied and electrode plates are sacrificed (dissolved into solution). The dissolution causes an increased metal concentration in the solution that finally precipitates as oxide precipitates. Due to improved process design and material of construction, the EC process is being widely accepted over other physicochemical processes. Presently, this process has gained attention due to its ability to treat large volume and for its low cost. The aim of this study is to review the mechanism, affecting factors, process, and application of the electrocoagulation process.     

Impact of some chlorinated pesticides on the haematology of the fish Cyprinus carpio and Puntius ticto

The effects of pesticides on blood characteristics and histological changes in erythrocytes of the fish species Cyprinus carpio and Puntius ticto were studied. The fishes were exposed to sub lethal concentrations of different chlorinated pesticides namely aldrin, dieldrin, DDT, BHC and chlordane for 10, 20 and 30 d in continuous flow-through test. The LCso values were calculated based on acute toxicity tests and the sublethal doses were arrived at for chronic bioassay studies. Results showed an increase in haemoglobin content of both Cyprinus carpio and Puntius ticto in case of aldrin and dieldrin. Haemoglobin content reduced from an initial 13 g/100 ml to 8.07 and 10.15 g/100 ml in case of Cyprinus at the end of ten days exposure to aldrin and dieldrin respectively, and gradually increased to 8.7 g/100 ml and 10.15 g/100 ml after 20 d of exposure. The haemoglobin content after 30 d exposure to aldrin and dieldrin was 10.15 g/100 ml and 11.6 g/100 ml respectively. In case of Puntius ticto, the haemoglobin content in control fishes recorded was 12.8 g/100 ml while in case of fish exposed to aldrin, the haemoglobin content reduced initially on ten days exposure to 10.15 g/100 ml and increased to 11.6 g/100 ml and 13.0 g/100 ml during twenty days and thirty days exposure respectively. This trend was also observed with dieldrin in both the fishes studied. Red blood cells were also counted in case of all the pesticides and exposure periods with respect to Cyprinus carpio and Puntius ticto. Irrespective of the species and pesticide, the RBC counts uniformly showed decreasing trend with the increase in exposure period, while packed cell volume, PCV(%) showed increasing trend with respect to increase in exposure period in case of aldrin and dieldrin in both the fishes. But DDT, BHC and chlordane showed decreasing trend in PCV(%) values with increasing periods of exposure.     

Development of food-grade antimicrobials of fenugreek oil nanoemulsion—bioactivity and toxicity analysis

Environmental Science and Pollution Research - Antimicrobials of natural origin are proving to be an effective solution to emerging antimicrobial resistance and its physiological side effects....     

Heavy metal pollution of ambient air in Nagpur City

Heavy metals released from different sources in urban environment get adsorbed on respirable particulate matter less than 10 μm in size (PM₁₀) and are important from public health point of view causing morbidity and mortality. Therefore, the ambient air quality monitoring was carried out to study the temporal and special pattern in the distribution of PM₁₀ and associated heavy metal content in the atmosphere of Nagpur, Maharashtra State, India during 2001 as well as in 2006. PM₁₀ fraction was observed to exceed the stipulated standards in both years. It was also observed that minimum range of PM₁₀ was observed to be increased in 2006 indicating increase in human activity during nighttime also. Six heavy metals were analyzed and were observed to occur in the order Zn > Fe > Pb > Ni > Cd > Cr in 2006, similar to the trend in other metro cities in India. Lead and Nickel were observed to be within the stipulated standards. Poor correlation coefficient (R ²) between lead and PM₁₀ indicated that automobile exhaust is not the source of metals to air pollution. Commercial and industrial activity as well as geological composition may be the potential sources of heavy metal pollution. Total load of heavy metals was found to be increased in 2006 with prominent increase in zinc, lead, and nickel in the environment. Public health impacts of heavy metals as well as certain preventive measures to mitigate the impact of heavy metals on public health are also summarized.