Improved desalination by polyamide membranes containing hydrophilic glutamine and glycine

Environmental Chemistry Letters - Water desalination and recycling of wastewater is a key challenge to meet water shortage issues. Thin film composite polyamide membranes are widely used for...     

Heavy metals in the SPM of air in the environment surrounding a ferro-alloy industrial plant in India

Prices for ferro-alloys have hardened due to the closure of plants in developed countries on account of increasingly stringent pollution control legislation, resulting in a higher cost of production. A ferro-alloy industry with a capacity of 80000 MT per annum was selected to study the nature of pollution. Because of the objectionable nature of polluting air in and around the plant it was located in a rural area where there was no other industry. The area was agriculturally active and there was no effective control system for this plant.The quality of ambient air around the plant site is discussed in this paper along with the meteorological conditions. The maximum concentration of suspended particulate matter (SPM) was 768 µg/NM³ downwind of the plant, minimum 184 µg/NM³, and the average was more than 446 µg/NM³. The presence of heavy metals, viz. Fe, Mn, Cr and Pb, was also assessed. The concentration of Fe was 50 µg/NM³ downwind and 10 µg/NM³ upwind. The concentration of other metals followed a similar trend.     

Design parameters for fixed bed reactors of activated carbon developed from fertilizer waste for the removal of some heavy metal ions

Activated carbon, developed from fertilizer waste, has been used for the removal of Hg²⁺, Cr⁶⁺, Pb²⁺, and Cu²⁺. Mass transfer kinetic approach has been successfully applied for the determination of various parameters necessary for designing a fixed-bed absorber. Parameters selected are the length of the (PAZ) primary adsorption zone (δ), total time involved for the establishment of primary adsorption zone (t_x), mass rate of flow to the absorber (F_m), time for primary adsorption zone to move down its length (t_δ), amount of adsorbate adsorbed in PAZ from breakpoint to exhaustion (M_s), fractional capacity (f), time of initial formation of PAZ (t_f) and per cent saturation of column at break point. Chemical regeneration has been achieved with 1 M HNO₃.     

Case study of landfill leachate recirculation using small-diameter vertical wells

A case study of landfill liquids addition using small diameter (5 cm) vertical wells is reported. More than 25,000 m³ of leachate was added via 134 vertical wells installed 3 m, 12 m, and 18 m deep over five years in a landfill in Florida, US. Liquids addition performance (flow rate per unit screen length per unit liquid head) ranged from 5.6 × 10^?8 to 3.6 × 10^?6 m³ s^?1 per m screen length per m liquid head. The estimated radial hydraulic conductivity ranged from 3.5 × 10^?6 to 4.2 × 10^?4 m s^?1. The extent of lateral moisture movement ranged from 8 to 10 m based on the responses of moisture sensors installed around vertical well clusters, and surface seeps were found to limit the achievable liquids addition rates, despite the use of concrete collars under a pressurized liquids addition scenario. The average moisture content before (51 samples) and after (272 samples) the recirculation experiments were 23% (wet weight basis) and 45% (wet weight basis), respectively, and biochemical methane potential measurements of excavated waste indicated significant (p < 0.025) decomposition.     

Developing an effectiveness index for biomedical waste management in Indian states using a composite indicators approach

Environmental Science and Pollution Research - The waste from healthcare facilities (HCFs) is most devastating as they induce health hazards and pollute the environment. The effective management of...     

Potentiality of different isolates of wilt fungus Fusarium oxysporum collected from rhizosphere of tomato against root-knot nematode Meloidogyne incognita

This investigation was undertaken to determine the effect of culture filtrates of different isolates of Fusarium oxysporum f. sp. lycopersici on mortality of Meloidogyne incognita juveniles and egg hatching. It was observed that different concentrations including standard extract (S.E), 1:10 and 1:100 dilutions of all fungal filtrates inhibited egg hatch when compared with control. Minimum mortality and maximum hatching was observed in BRT (showing least mortality) isolate of F. oxysporum, while maximum mortality and minimum egg hatching was recorded in BGT (showing maximum mortality) isolate. Larval mortality was decreased with a decrease in concentration and the least mortality was observed in 1:100 when compared with SE and 1:10. The potentiality of both the isolates (BRT and BGT) against root-knot nematode M. incognita was confirmed by the pathogenicity test on tomato. These observations confirmed that F. oxysporumisolates possesses variability in pathogenicity ranging from pathogenic to bio-control agent. The plants inoculated with BRT isolate failed to show wilt symptoms while plants inoculated with BGT isolate showed wilt indices.     

Formation of aerobic granules in the presence of a synthetic chelating agent

This paper examines the development of aerobic granular sludge in the presence of a synthetic chelating agent, nitrilotriacetic acid (NTA), in sequencing batch reactors (SBR). The growth of seed sludge at 0.26 mM, 0.52 mM and 1.05 mM of NTA was found to be significantly lower as compared to that in the absence of NTA. Aerobic granulation was significantly enhanced in the three SBRs (R2, R3 and R4), which were fed with 0.26 mM, 0.52 mM and 1.05 mM of NTA as a co-substrate, in comparison to the acetate-alone fed SBR (R1). After 2 months of operation, the mean diameter of the biomass stabilized at 0.35 mm in R1 (acetate alone), as compared to 2.18 mm in R4 (1.05 mM NTA+acetate). NTA degradation was established in SBRs, with almost complete removal during the SBR cycle. Batch experiments also showed efficient degradation of NTA by the aerobic granules.     

An Analysis of the Annual and Seasonal Trends of Air Quality Index of Delhi

The Air Quality Index (AQI) is an index for reporting daily air quality. A study on the annual and seasonal variations of Air Quality Index over a period of 9 years (1996-2004) based on daily averaged concentration data of criteria air pollutants has been conducted for Delhi. An attempt has been made to quantify the changes in the AQI on annual and seasonal (winter, summer, monsoon and post monsoon) basis for 9 years. Measurements for the seven monitoring sites (Nizamuddin, Ashok Vihar, Shahzada Baug, Shahadara, Janakpuri, Sirifort and ITO) in Delhi were analysed and trends were also compared amongst these sites. Maximum Operator Function method was used to compute the Air Quality Index of the above areas and percentage variations in different severity class is discussed which provides in depth analysis of the trends. The best air quality was depicted by Shahzada Baug followed by Shahdara, both of these were classified as industrial areas indicating that policy measures relating to the industries in the city during past years have helped in improving the air quality. The air quality in other areas have improved slightly in the span of nine years but still remains critical indicating continued rigorous efforts in this direction. Increased traffic density seems to have resulted into the worst air quality at ITO in the city amongst all the monitoring stations. There is a shift for the worst AQI in the city from winter to summer season in a time span of these nine years. Change of season for worst AQI from Winter to Summer may also be likely due to increased photochemical reactions playing major role with change in the nature of emissions imposed due to different control measures such as CNG implementation, significant shift to LPG in domestic sector etc. calling for a detailed study, those which started after the year 2000. After the year 2000, there is a significant increase in the Nitrogen-dioxide (NO(2)) concentration at all stations. ITO which has shown continuous exponential increase in pollution levels has first time showed a declining AQI trend in the year 2004 and one of the contributing factors could have been the Delhi metro (initiated in 2002) passing through congested neighbouring areas causing traffic decongestion here. In general, the areas which are farthest from metro route viz., Siri-fort, Nizamuddin, Janakpuri etc. did not record declining AQI in 2003 onwards as happened with stations closer to Metro route such as Ashok Vihar and ITO. An attempt has been made to quantify the reasons that lead to the changes in the values of the AQI.     

Environmental forensic investigation of the air pollution from a cement manufacturing unit

Abstract

Cement manufacturing is a process that results in the emission of significant quantities of suspended particulate matter (SPM) to the ambient air. An environmental forensic investigation was carried out in the surroundings of a major cement manufacturing unit at a place called Coimbatore in the southern Indian state of Tamil Nadu. The investigation was carried out to identify the contribution of the cement manufacturing unit to the SPM concentration of the surrounding air environment. The sampling points’ selection and sample collection were done following the principles outlined in the INTERPOL Manual for Pollution Crime Forensic Investigation. On-site monitoring of the air samples was carried out using Mini Laser Aerosol Spectrometer (GRIMM, Mini-LAS Model 11R). The instrument was capable of measuring particles ranging from 0.25 to 32 µm and classifying them into 31 size channels. The test results at majority of the monitoring locations were well above the limits specified in the National Ambient Air Quality Standards of India. Microscopic studies of the dust samples were carried out for surface texture and particle shape. The spatial distribution of particles was analysed using geographic information system (GIS) for the visual identification of the extent of the pollution by keeping the cement factory as the focal point. The results from the GIS and microscopic analysis established the role of the cement factory in the particulate matter pollution of its surroundings, specifically in the areas North-West of the factory. The successfully adopted procedure can serve as a guideline for the environmental forensic investigation of similar pollution incidences.     

Biodegradable Water Soluble Copolymer for Antimicrobial Applications

Synthesis and characterization of novel biodegradable, water soluble and optically active DL-malic acid (DMA) and citric acid (CA) copolymers were studied for possible use as antibacterial agents. The copolymers were synthesized by direct bulk melt condensation in the absence of a catalyst above 150 °C. Characterization of obtained copolymers was carried out with the help of infrared absorption spectra, differential scanning calorimetry and thermo gravimetric analysis. The antibacterial activity of copolymers against bacteria was investigated. The results obtained shows the above copolymers possess a broad wound dressing activity against different types of bacteria and may be useful as antibacterial agents.