排序方式: 共有18条查询结果,搜索用时 15 毫秒
1.
Groundwater contamination mechanism in a geothermal field: a case study of Balcova, Turkey 总被引:2,自引:0,他引:2
The Balcova Geothermal Field (BGF) located in Izmir, Turkey is situated on an east-west directed graben plain within which the hot waters surface from a fault zone that cuts the Mesozoic aged Bornova Flysch. Due to the low permeability and porosity of the Bornova Flysch, the geothermal water cycles along the immediate vicinity of the Agamemnon fault and mixes with cold waters at different depths of this fractured zone. Within the scope of this study, the mixing patterns and the groundwater contamination mechanisms are analyzed by, hydrogeological and hydrogeochemical methods. Based on the results of this research, it has been found out that the hot geothermal water and the cold regional groundwater resources of the surficial aquifer mix within the fractured zone in Bornova Flysch and within the Quaternary alluvium aquifer due to natural and anthropogenic activities including (i) the natural upward movement of geothermal fluid along the fault line, (ii) the accelerated upward seepage of geothermal fluid from faulty constructed boreholes drilled in the area, (iii) the faulty reinjection applications; and, (iv) the uncontrolled discharge of waste geothermal fluid to the natural drainage network. As a result of these activities, the cold groundwater reserves of the alluvial aquifer are contaminated thermally and chemically in such a way that various toxic chemicals including arsenic, antimony and boron are introduced to the heavily used surficial aquifer waters hindering their use for human consumption and agricultural irrigation. Furthermore, the excessive pumping from the surficial aquifer as well as the reduced surface water inflow into BGF due to the dam constructed on Ilica Creek intensify the detrimental effects of this contamination. Based on the results of this study, it can be concluded that the groundwater pollution in BGF will expand and reach to the levels of no return unless a series of preventive measures is taken immediately. 相似文献
2.
Aslı Aksoy 《International Journal of Green Energy》2019,16(1):34-48
All economic sectors are associated with energy use; therefore, government organizations aim to supply sustainable energy for human needs and economic growth. In particular, increased environmental concerns of the public in Turkey have impacted policymaking for renewable energy (RE) management in Turkey. The primary objective for RE sources of the Turkish Ministry of Energy is to ensure that 30% of the share of electricity production is from RE resources in 2023. In this paper, the integrated multi-objective, multi-period linear programming model is presented to determine effective allocation of RE supply for seven different geographical regions in Turkey for the period of 2017 to 2024. The integrated model consists of two different stages. The first stage involves qualitative evaluations of RE sources for seven geographical regions. Analytical Hierarchy Process (AHP) is applied to determine criteria priorities and overall ratings of geographical regions across determined criteria for RE sources are computed. The second stage of the integrated model consists of a multi-objective, multi-period linear programming model. The proposed multi-objective linear programming model is coded in MPL (Mathematical Programming Language) and solved using the GUROBI 5.1.0 solver. The output of the integrated model presents the total supply amount of RE sources for geographical regions in planning period. The ε-constraints method is applied to compute the total supply amount of RE from geographical regions for the period of 2017 to 2024. In this study, a systematic decision-making model is generated to allocate renewable energy sources to the geographical regions. The presented model integrates qualitative evaluations and quantitative parameters of different geographical regions to determine the optimal supply amount of RE. The obtained results are consistent with the potential quantities of RE alternatives in geographical regions, regional specifications, and social requirements. 相似文献
3.
Osman Gencel Cengiz OzelFuat Koksal Ertugrul ErdogmusGonzalo Martínez-Barrera Witold Brostow 《Journal of Cleaner Production》2012,21(1):62-70
Marble industry produces large amounts of waste marble - what causes environmental problems. In paving blocks based on two cement types we have partly replaced aggregate with waste marble. Physical and mechanical tests were performed on blocks so produced. The cement type turns out to be an important factor. Mechanical strength decreases with increasing marble content while freeze-thaw durability and abrasive wear resistance increase. Waste marble is well usable instead of the usual aggregate in the concrete paving block production. 相似文献
4.
Incipient deposition of sediment in rigid boundary open channels 总被引:1,自引:0,他引:1
Mir Jafar Sadegh Safari Hafzullah Aksoy Mirali Mohammadi 《Environmental Fluid Mechanics》2015,15(5):1053-1068
5.
Concentrations of heavy metals (Cd, Pb, Cr, Ni, Zn and Cu) were measured in bottom sediments, water and Typha angustifolia and Potamogeton pectinatus in Sultan Marsh. Sultan Marsh is one of the largest and most important wetlands in Turkey, Middle East and Europe, embodying saline and fresh water ecosystems and providing a shelter for 426 bird species. The organs of T. angustifolia have a larger quantity of the measured elements than the P. pectinatus. Considerably higher contents of Cd were found rather than in helophytes (P. pectinatus) in submerged plant (= emergent, T. angustifolia) species. The percentage of Cd in plant tissues points to a certain degree of water pollution in Sultan Mash. Analyses of water, bottom sediments and plant samples indicated that the Marsh were polluted with Pb, Cd, and partly with Cu and Zn. All sampling sites in the study area basin are generally more or less polluted when compared with the control values. Strong positive correlation was found between concentrations of Pb in water and in plants. Ni and Pb were accumulated by plants at a higher rate from bottom sediments than from water. Leaves of T. angustifolia accumulated less heavy metal than the corresponding roots. There was a significant relationship between Cd concentration in samples of plants and water pH value. It has been found that the tissues of T. angustifolia accumulate more heavy metals than the tissues of P. pectinatus. Therefore, all plants can be used as a biological indicator while determining environmental pressures; however, T. angustifolia is proved more appropriate for such studies. 相似文献
6.
In this study, we investigated the effects of Matricaria chamomilla L. extract (MCE) on lipid peroxidation, antioxidant enzyme systems, and several liver enzymes in carbon tetrachloride (CCl4)-treated rats. Rats were divided into five groups. The first group (control group) was fed on standard feed. The rats in the other groups (CCl4, MCE50, MCE100, and MCE200) were injected intraperitoneally with 0.8?mL?kg?1 CCl4. Moreover, rats in the MCE50, MCE100, and MCE200 groups were gavaged with 50?mg?kg?1, 100?mg?kg?1, and 200?mg?kg?1 MCE, respectively. Serum aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels, whole blood malondialdehyde (MDA) and glutathione (GSH) levels, and erythrocyte superoxide dismutase (SOD), glutathione peroxidase (GPx), and catalase (CAT) activity levels were measured after 14 days of exposure. ALT and AST in the CCl4 group increased significantly in comparison to the control group (p?0.001). MCE decreased MDA levels and increased GSH, SOD, and GPx activities. Decreases were observed in CAT activity levels in the CCl4, MCE50, MCE100, and MCE200 groups at different significance levels. In conclusion, the findings suggest that, depending on the dose administered, MCE decreases CCl4-induced damage and consequent oxidative stress in rats; it affects the antioxidant system positively. 相似文献
7.
Tufekcioglu A Kucuk M Saglam B Bilgili E Altun L 《Journal of environmental biology / Academy of Environmental Biology, India》2010,31(3):369-373
Fire is an important tool in the management of forest ecosystems. Although both prescribed and wildland fires are common in Turkey, few studies have addressed the influence of such disturbances on soil properties and root biomass dynamics. In this study, soil properties and root biomass responses to prescribed fire were investigated in 25-year-old corsican pine (Pinus nigra Arn.) stands in Kastamonu, Turkey. The stands were established by planting and were subjected to prescribed burning in July 2003. Soil respiration rates were determined every two months using soda-lime method over a two-year period. Fine (0-2 mm diameter) and small root (2-5 mm diameter) biomass were sampled approximately bimonthly using sequential coring method. Mean daily soil respiration ranged from 0.65 to 2.19 g Cm(-2) d(-1) among all sites. Soil respiration rates were significantly higher in burned sites than in controls. Soil respiration rates were correlated significantly with soil moisture and soil temperature. Fine root biomass was significantly lower in burned sites than in control sites. Mean fine root biomass values were 4940 kg ha(-1) for burned and 5450 kg ha(-1) for control sites. Soil pH was significantly higher in burned sites than in control sites in 15-35 cm soil depth. Soil organic matter content did not differ significantly between control and burned sites. Our results indicate that, depending on site conditions, fire could be used successfully as a tool in the management of forest stands in the study area. 相似文献
8.
Can Cinar Duygu Ipci Emre Yılmaz Fatih Aksoy 《International Journal of Green Energy》2020,17(13):884-893
ABSTRACT Stirling engines maintain attraction because of their high energy conversion efficiencies. In this study, experimental comparison of a beta-type Stirling engine for two different rhombic-drive mechanisms was presented. In one of the rhombic mechanisms, spur gears were used and the gear shaft was supported in bearings from one side. In the other mechanism, two helical gears were placed on crankshafts and the crankshafts were supported in bearings from both sides. Rhombus lengths of the mechanisms were determined as 66 mm and 80 mm to provide same constant compression ratio of 2.5 for both configurations. Both mechanisms were used in the same beta-type Stirling engine having same cylinder, piston and displacer dimensions. Performance parameters of the engines were evaluated at different helium charge pressures (2–4 bar) and hot-end temperatures (400–600°C). The hot-end of the displacer cylinder was heated by a liquefied petroleum gas (LPG) burner. The engine power increased by 132%, friction losses and gear noses were reduced by supporting the rhombic-drive mechanism from both side and using helical gears. The maximum output torque and power of the engine were obtained as 13.14 Nm at 428 rpm engine speed and 663 W at 800 rpm engine speed, respectively, at 600°C hot-end temperature and 4 bar charge pressure. 相似文献
9.
Sediment transport from steep slopes and agricultural lands into the Uluabat Lake (a RAMSAR site) by the Mustafakemalpasa (MKP) River is a serious problem within the river basin. Predictive erosion models are useful tools for evaluating soil erosion and establishing soil erosion management plans. The Revised Universal Soil Loss Equation (RUSLE) function is a commonly used erosion model for this purpose in Turkey and the rest of the world. This research integrates the RUSLE within a geographic information system environment to investigate the spatial distribution of annual soil loss potential in the MKP River Basin. The rainfall erosivity factor was developed from local annual precipitation data using a modified Fournier index: The topographic factor was developed from a digital elevation model; the K factor was determined from a combination of the soil map and the geological map; and the land cover factor was generated from Landsat-7 Enhanced Thematic Mapper (ETM) images. According to the model, the total soil loss potential of the MKP River Basin from erosion by water was 11,296,063?Mg?year(-1) with an average soil loss of 11.2?Mg?year(-1). The RUSLE produces only local erosion values and cannot be used to estimate the sediment yield for a watershed. To estimate the sediment yield, sediment-delivery ratio equations were used and compared with the sediment-monitoring reports of the Dolluk stream gauging station on the MKP River, which collected data for >41?years (1964-2005). This station observes the overall efficiency of the sediment yield coming from the Orhaneli and Emet Rivers. The measured sediment in the Emet and Orhaneli sub-basins is 1,082,010?Mg?year(-1) and was estimated to be 1,640,947?Mg?year(-1) for the same two sub-basins. The measured sediment yield of the gauge station is 127.6?Mg?km(-2)?year(-1) but was estimated to be 170.2?Mg?km(-2) year(-1). The close match between the sediment amounts estimated using the RUSLE-geographic information system (GIS) combination and the measured values from the Dolluk sediment gauge station shows that the potential soil erosion risk of the MKP River Basin can be estimated correctly and reliably using the RUSLE function generated in a GIS environment. 相似文献
10.
Ersenkal DA Ziylan A Ince NH Acar HY Demirer M Copty NK 《Journal of contaminant hydrology》2011,126(3-4):248-257
This paper investigates the impact of dilution on the mobility of magnetite nanoparticles surface coated with poly(acrylic acid) (PAA). Transport experiments were conducted in a water-saturated sand-packed column for input nanoparticle solutions with total Fe concentrations ranging from 100 to 600mg/L. Particle size analysis of the synthesized nanoparticle solutions showed that PAA provides good size stability for Fe concentrations as low as about 1mg/L. Time-moment analysis of the nanoparticle breakthrough curves, on the other hand, revealed that nanoparticle mass recovery from the column decreased consistently with dilution, with greater attenuation, sharper fronts and longer tails compared to that of the tracer. Particle size analysis of the eluted solutions shows that the nanoparticle size is negatively correlated with nanoparticle concentration. Modeling results suggest that the decrease in nanoparticle mobility with input concentration can be represented using a kinetic time-dependent deposition term with finite deposition capacity and a kinetic detachment term. For field applications, the increase in particle size and detachment resulting from dilution means reduced transport efficiency of nanoparticles and reaction potential with travel distance. 相似文献