内螺纹变截面铜管拉伸工艺的研究

此文提出了内螺纹变截面铜管分段拉仲一次成形新工艺,并就工艺因素对该管拉伸成形的影响进行了试验研究,从而为合理制订成形工艺提供了依据。     

Community-Based Integrated Watershed Management

1 INTRODUCTIONIn the past, natural resources management initiatives havefocused on large but specific sector projects such as dams,reservoirs for water supply schemes, irrigation systems,crop production, at forestation, etc. Often these projectswere treated as technical and administrative issues ratherthan as a socio-economic and political one. However, thehigh social and environmental cost of such schemes haveled to a change of paradigm since the 1980s towards small-scale community projec…     

金属加工过程中应力状态的分析方法

分析简单地拉伸、压缩和扭转的情况时,应力状态能容易地被确定.但是,实际上在金属加工过程中材料是承受复杂的应力状态,在模具——工件接触面上增加有摩擦力.而且,这些应力和摩擦力一般地沿着接触面变化.准确的计算或预测载荷、力、应力和温度,不但对设计适宜的设备是重要的,而且对研究工艺期间材料的变化过程也是重要的.本文将讨论材料变形过程中所运用的主要分析方法及其优缺点.     

圆形烟道烟尘采样点位置确定之正误

采样点位置的确定是烟尘测试中的一项基础工作。在全国沿用10多年的确定圆形圆形烟道烟尘采样点位置的计算表中的数据,经验算有60％有误;原来以烟道中心为基准的计算公式虽然正确,但实用性差。为了进一步完善烟气测试理论,提高监测质量,提出以烟道内壁为基准的新计算公式。运用新、旧2种计算公式得到一致的计算结果—新计算表,进一步证实了原计算表中的错误。     

不同轮作模式下作物根际土壤养分及真菌群落组成特征

为研究宁夏中部干旱带不同轮作模式下土壤养分及真菌群落组成的特征,以谷子轮作大豆（MRG）、轮作籽粒苋（MRA）、轮作藜麦（MRQ）及谷子连作（CK）为对象,测定了土壤养分含量,并利用Illumina MiSeq高通量测序平台测定了土壤真菌的ITS变异区序列.结果表明,不同轮作模式对土壤养分的影响存在差异.3种轮作模式下土壤pH和电导率均有所下降,土壤全氮、全钾、全磷和有机质含量均上升,OTUs数和α多样性指数均高于连作.真菌群落组成研究结果显示,子囊菌门（Ascomycota）为4种模式下的优势菌群.聚类分析显示MRA和MRG的真菌属组成最为相似,其次是MRQ,CK与3种轮作模式相差较大.相关性分析显示,土壤养分与几种优势真菌属呈显著相关性（P<0.05或P<0.01）,土壤全氮、全钾、硝态氮和有机质含量是影响土壤真菌群落最主要的因子.主成分分析（PCA）表明,MRG轮作模式优于MRA和MRQ模式.综上所述,轮作提高了真菌群落多样性指数,改变了土壤真菌群落结构,改善了土壤肥力状况,其中以谷子与大豆轮作效果最佳,建议将谷豆轮作作为中部干旱带杂粮产业中主要的轮作模式之一进行推广.     

Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

轻质高强多功能点阵夹层结构研究进展

根据材料类型和点阵结构,对点阵夹层结构进行了分类简述,并从静态、动态力学性能上,分析了各类点阵夹层结构的优缺点。简要叙述了设计过程中,综合考虑材料、结构以及功能等影响因素,针对不同使用工况的要求,可对各影响因素进行匹配设计,以实现传热特性、电磁波屏蔽特性、声学特性等不同的功能性需求。然后介绍了复合点阵夹层结构(嵌锁组装、模具热压成形、穿插编织)和金属点阵夹层结构(冲压成形、挤压线切割、拉伸网折叠、搭接拼装、熔模铸造以及增材制造)的主要制造工艺。最后提出如何将设计因子与多目标进行匹配及优化设计,是轻质高强点阵夹层结构的重点研究方向,轻质高强点阵夹层结构将朝多材料及多结构复合方向发展,开发新的制造工艺,提高费效比,是点阵夹层结构材料需解决的问题。     

环境保护因素对落后地区旅游开发的促进作用研究

为了提高落后地区旅游开发的质量,分别从低碳环保旅游以及生态旅游两方面,研究环保因素对落后地区旅游开发的促进作用。提出低碳环保旅游,并分析低碳环保对落后地区旅游业可持续发展的意义,在落后地区旅游开发中实施低碳饮食、低碳住宿、低碳交通以及低碳能源的旅游开发模式。对中国落后地区生态旅游现状和意义实施研究,分析生态旅游对落后地区旅游开发的促进作用。最终给出了落后地区实现生态旅游开发的建议,构建落后地区低碳环保的新型生态旅游模式,实现落后地区旅游的可持续发展。     

A study on the interactions among several plant secondary compounds and aphids

The research, focused on the specific interactions among seven plant secondary compounds and aphids, was carried out and the preliminary results showed: (1) "T-typed tube method" was regarded as the best method compared with others designed to observe the interactions. (2) Cabbage aphid was able to be attracted by laurolene while it was not susceptible to α-pinene, β-pinene and diamylene. (3) Gossypol, a major secondary substance in cotton, was able to be implicated as feeding attractant to cotton aphid. (4) Rutin might be implicated repellent to cotton aphid.     

Bi-national assessment of the Great Lakes: SOLEC partnerships

Many administrative jurisdictions have authority over parts of the Great Lakes, sometimes with competing purposes as well as governance at differing scales of time and space. As demand increases for high quality information that is relevant to environmental managers, environmental and natural resource agencies with limited budgets must look to interdisciplinary, collaborative approaches for the collection, analysis and reporting of data. The State of the Lakes Ecosystem Conferences (SOLEC) were begun in 1994 in response to reporting requirements of the Great Lakes Water Quality Agreement between Canada and the U.S. The biennial conferences provide independent, science-based reporting on the state of health of the Great Lakes ecosystem components. A suite of indicators necessary and sufficient to assess Great Lakes ecosystem status was introduced in 1998, and assessments based on a subset of the indicators were presented in 2000. Because SOLEC is a multi-agency, multi-jurisdictional reporting venue, the SOLEC indicators require acceptance by a broad spectrum of stakeholders in the Great Lakes basin. The SOLEC indicators list is expected to provide the basis for government agencies and other organizations to collaborate more effectively and to allocate resources to data collection, evaluation and reporting on the state of the Great Lakes basin ecosystem.