碱性蚀刻废液的萃取电积再生

简要分析了碱性蚀刻废液的特点,总结了萃取电积法再生碱性蚀刻废液的基本原理,并进行了工程应用和环境效益分析。结果表明,碱性蚀刻再生液的蚀刻速率达60 m/min,蚀刻因子为3.5以上,回收铜纯度为99.95%。     

膜电解法从模拟酸性蚀刻废液中回收铜粉

酸性蚀刻废液是一种印制电路板制作过程中产生的强酸、高铜的工业废水,对其回收利用具有较高的经济价值。采用膜电解法处理模拟酸性蚀刻废液,在阴极区回收铜粉。研究了铜粉的形成条件,考察了阴极液铜浓度、温度和电流密度对阴极电流效率的影响。结果表明,阴极液的铜浓度在20~25 g/L,温度为45~50℃,电流密度在11~12 A/dm2,阴极的电流效率最高。随着阴极液酸度的增加,铜粉的纯度提高,但阴极电效会降低。为保证较高的铜粉纯度及阴极电效,阴极液的酸度在0.32~0.36 mol/L为宜。     

碱性蚀刻废液处理方式的比较研究

碱性蚀刻废液是一种铜含量高、废液浓度较高的工业废水,对其回收利用具有较高的经济价值和环境效益。简要介绍、比较分析了碱性蚀刻废液实用的两种处理方式。在线方式可实现碱性蚀刻液再生和金属铜的回收,而线外方式可回收多种铜盐。从资源循环、环境效益角度分析,在线方式将具有广阔的应用前景。     

电化学技术在印制电路板含铜废液处理的应用

电化学技术因具有工艺灵活、易于控制和环境友好等优点倍受研究者关注.简要介绍了常用的电化学技术,包括内电解、常规电解和膜电解等基本原理.综述了上述电化学技术在印制电路板含铜废液再生或铜电解回收中的应用概况,分析了各种技术的优缺点,并展望了处理含铜废液电化学技术的发展前景.     

Secondary organic aerosols in Jinan, an urban site in North China: Significant anthropogenic contributions to heavy pollution

Secondary organic aerosols(SOAs) are an important component of particulates, but whether biogenic SOAs(BSOAs) or anthropogenic SOAs(ASOAs) are the dominant contributors to haze pollution remains poorly characterized. In this study, particulate samples were collected from September 2014 to August 2015 at an urban site in Jinan, which is the capital of Shandong Province and a typical city in the North China Plain. The PM2.5 samples were analyzed for BSOA(isoprene(SOAI) and monoterpenes(SOAM)) and ASOA(aromatic(SOAA)) tracers. The concentrations of the SOAAtracer(1.1 ± 1.0 ng/m3) were lowest, and those of SOAItracers(41.8 ± 86.2 ng/m3) were highest, with the concentrations of SOAMtracers(19.4 ± 9.9 ng/m3) being intermediate. The SOAItracers were more abundant in the summer and less abundant in the winter. Both SOAIand SOAMincreased with increasing ozone level but decreased with increasing NOx level. Correlation analysis revealed a good correlation between 2,3-dihydroxy-4-oxopentanoic acid and levoglucosan levels in three seasons. These results suggested that biomass burning activities occurring in the NCP can enhance the emissions of aromatics and should be controlled, especially in the autumn and winter. SOA tracers were classified according to pollution degree, and the results showed that as pollution increases, the contributions of SOAAincrease. These results indicate that reducing anthropogenic emissions is necessary to prevent SOA pollution, especially during heavy pollution episodes.     

印制电路板酸性蚀刻废液的膜电解再生

高度精细化线路和高层数印制电路板产量的增加,导致酸性蚀刻废液的排放量越来越大,对环境的负荷也随之增大.介绍了酸性蚀刻废液膜电解再生的基本原理,进行了中试规模的应用研究,并与其他电解再生方法进行技术与经济比较分析.结果表明,在槽电压为5V、电解时间为2h的条件下,酸性蚀刻废液的氧化还原电位由480 mV升至540mV,所...     

Fenton及电-Fenton处理难降解有机废水技术

Fenton法与电-Fenton法属于高级氧化技术(Advanced Oxidation Technologjes,AOTs),是由H2O2与催化剂Fe2 所构成的氧化体系.在Fenton体系中,H2O2在Fe2 的催化剂作用下,能产生两种活泼的氢氧自由基(HO2·和·OH),从而引发和传播自由基链反应,加快有机物和还原性物质的氧化.本文简要介绍了Fenton法与电-Fenton反应的机理和应用在催化氧化难降解废水领域中的处理技术及研究进展.     

印制电路板酸性蚀刻废液的回收利用

综述了酸性蚀刻废液的污染危害及处理现状,全面介绍了酸性蚀刻废液回收利用的方法.金属置换法、中和酸溶法方法简便、投资少;酸性蚀刻废液、碱性蚀刻废液自中和法制备碱式氯化铜经济、高效,是大型印制电路板制造企业间收利用蚀刻废液的优选方法;电解再生法不仪使蚀刻废液恢复原有的蚀刻效能,而且产出具有商业价值的铜,成为印制电路板制造企业的首选方法.