Evaluation of practicing safety features for hospital waste collection among Iran’s public hospitals

Journal of Material Cycles and Waste Management - Hospital waste management is imperative due to its impending health hazards. This study was meant to evaluate the strong safety awareness of...     

Concentration and characterization of airborne particles in Tehran’s subway system

Particulate matter is an important air pollutant, especially in closed environments like underground subway stations. In this study, a total of 13 elements were determined from PM₁₀ and PM_2.5 samples collected at two subway stations (Imam Khomeini and Sadeghiye) in Tehran’s subway system. Sampling was conducted in April to August 2011 to measure PM concentrations in platform and adjacent outdoor air of the stations. In the Imam Khomeini station, the average concentrations of PM₁₀ and PM_2.5 were 94.4?±?26.3 and 52.3?±?16.5 μg m^?3 in the platform and 81.8?±?22.2 and 35?±?17.6 μg m^?3 in the outdoor air, respectively. In the Sadeghiye station, mean concentrations of PM₁₀ and PM_2.5 were 87.6?±?23 and 41.3?±?20.4 μg m^?3 in the platform and 73.9?±?17.3 and 30?±?15 μg m^?3, in the outdoor air, respectively. The relative contribution of elemental components in each particle fraction were accounted for 43 % (PM₁₀) and 47.7 % (PM_2.5) in platform of Imam Khomeini station and 15.9 % (PM₁₀) and 18.5 % (PM_2.5) in the outdoor air of this station. Also, at the Sadeghiye station, each fraction accounted for 31.6 % (PM₁₀) and 39.8 % (PM_2.5) in platform and was 11.7 % (PM₁₀) and 14.3 % (PM_2.5) in the outdoor. At the Imam Khomeini station, Fe was the predominant element to represent 32.4 and 36 % of the total mass of PM₁₀ and PM_2.5 in the platform and 11.5 and 13.3 % in the outdoor, respectively. At the Sadeghiye station, this element represented 22.7 and 29.8 % of total mass of PM₁₀ and PM_2.5 in the platform and 8.7 and 10.5 % in the outdoor air, respectively. Other major crustal elements were 5.8 % (PM₁₀) and 5.3 % (PM_2.5) in the Imam Khomeini station platform and 2.3 and 2.4 % in the outdoor air, respectively. The proportion of other minor elements was significantly lower, actually less than 7 % in total samples, and V was the minor concentration in total mass of PM₁₀ and PM_2.5 in both platform stations.     

Optimization of membrane-based CO2-removal from natural gas using simple models considering both pressure and temperature effects

Simple models for permeability and selectivity variations of the CO₂/CH₄ system in 6FDA-2,6-DAT membrane have been derived that include both temperature and pressure effects simultaneously in a single equation. The proposed models were used in MATLAB, for a membrane-based CO₂-removal process design for natural gas sweetening. The effects of the following factors on design parameters were examined: feed temperature, feed pressure and permeate pressure. The effect of permeate pressure was found to be very significant in the optimization process. In order to reduce hydrocarbon losses to below 2%, a two-stage membrane process was modeled and simulated in MATLAB, and the extent of desired hydrocarbon recovery was shown to be crucial in the optimization process. It has also been shown that there exist minima for the total required area of the two-stage membrane-based process, and as the CO₂ load increases in the feed, the position of these minima shift to higher values of methane loss.     

Performance evaluation of a bipolar electrolysis/electrocoagulation (EL/EC) reactor to enhance the sludge dewaterability

The present study aimed to evaluate the performance of a bipolar electrolysis/electrocoagulation reactor designed to enhance the sludge dewaterability. The reactor was 15 L in volume, with two series of plates used in it; Ti/RuO₂ plates for the electrolysis of the sludge, and also aluminum and iron plates for electrocoagulation process. The dewaterability of the sludge was determined in terms of its capillary suction time (CST) and specific resistance to filtration (SRF), while the degree of sludge disintegration was determined based on the value of degree of sludge disintegration (DD_SCOD). The maximum reduction in CST and SRF was observed at a detention time of 20 min and a voltage of 30 V. However, increasing of both detention time and voltage significantly increased the values of CST and SRF even to an extent that they both exceeded those of the untreated sludge. The optimal degree of sludge disintegration achieved by the present study was 2.5%, which was also achieved at a detention time of 20 min and a voltage of 30 V. As reported previously, increased DD_SCOD values led to increasing CST and SRF values, due primarily to the disruption of the sludge flocs. According to the results from the present study, it can be concluded that simultaneous application of electrocoagulation and electrolysis is effective in enhancing the sludge dewaterability, because electrocoagulation helps to achieve a higher degree of sludge disintegration while maintaining the desired sludge dewaterability.     

Changes in chemical forms of lead in temperate and semiarid soils in sterile and unsterile conditions

Sequential extraction has been used as a suitable method for fractionation of chemical forms of trace elements and study of their plant availability. Surface soils were sampled from Guilan and Hamadan provinces in north and northwest of Iran with temperate and semiarid climates. The chemical forms of Pb in the Pb(NO₃)₂-treated (400 μg Pb g⁻¹) soils have been studied in solid state incubation (FC) at 27°C in sterile and unsterile conditions. After 20 min and 3600 h a sequential extraction scheme was also used to fractionate Pb of incubated samples into soluble-exchangeable (Sol-Exch), carbonates associated (ACar), organic matter associated (AOM), Mn oxide associated (AMnOx), Fe oxide associated (AFeOx), and residual (Res) forms. Temperate soil samples had higher clay content, cation exchange capacity (CEC), dichromate oxidable organic carbon (OC), total Kjeldahl-nitrogen (TN), biological activity, amorphous and crystalline Fe and Al, but semiarid soil samples had higher sand content, pH, equivalent calcium carbonate (ECC), available P and K. Soil lead fractionation revealed that in both groups of soils Pb largely changed to exchangeable, carbonates associated and organic associated forms after 20 min. The chemical forms of Pb differed widely among soils after 3600-h incubation. The conversion rate of Pb from more available forms to less available forms was higher in temperate soils with higher Fe–Mn oxides and OM contents compared to semiarid soils. In temperate soils after 3600-h incubation, greater content of Pb was observed in Res (68%), AOM (14%), ACar (7%), and AMnOx (5%) fractions. However, in semiarid soils greater content of Pb was observed in Res (61%), ACar (16%), Sol-Exch (8%), and AOM (8%) fractions. The sum of AMnOx and AFeOx chemical forms for Pb in semiarid soils compared to temperate soils was lower. It was only 7% against 9% in temperate soils. Soil microorganisms in unsterile soils had significant effect on AOM, AFeOx and Res fractions of Pb. They not only increased AOM and AFeOx fractions of Pb in soils but also decreased Res fraction of Pb significantly.     

Variation of crack intensity factor in three compacted clay liners exposed to annual cycle of atmospheric conditions with and without geotextile cover

Performance of compacted clay liners commonly used as landfill barrier systems can be subject to decline in terms of hydraulic conductivity if left exposed to atmospheric conditions for an extended period of time prior to placement of overlaying layers. The resulting desiccation cracking can lead to increased hydraulic conductivity. Desiccation crack intensity was studied for three clayey soils commonly used for construction of landfill barrier system in a relatively large scale test setup exposed to real time atmospheric conditions over a complete annual cycle. A white separator geotextile cover was presumed to be capable of reducing the intensity of desiccation cracking through absorbing and maintaining higher amounts of moisture and reducing the temperature of the soil surface in comparison to a directly exposed soil surface. Desiccation cracking was monitored using a digital imaging technique for three compacted clay liners in two sets, one open to air and the second covered with the white geotextile. Crack intensity factor approached a relatively stable phase after certain cycles corresponding to atmospheric dry wet cycles. The results indicated that the white separator geotextile was capable of reducing the crack intensity factor by 37.4–45.9% throughout the experiment including the cyclic phase of desiccation cracking. During the stable phase, the maximum reduction in crack intensity factor of 90.4% as a result of applying geotextile cover was observed for the soil with the lowest plastic index and clay content and therefore the lowest magnitude of crack intensity factor. The other two soils with similar clay content but different plastic index showed 23.6% and 52.2% reductions in crack intensity factor after cyclic phase when covered with geotextile.     

Preliminary assessment of cement kiln dust in solidification and stabilization of mercury containing waste from a chlor-alkali unit

Journal of Material Cycles and Waste Management - A low-level mercury containing hazardous waste with a mercury concentration of 22.0 ± 5.00 ppm generated at a...     

Study of trace elements in wet atmospheric precipitation in Tehran,Iran

In this study, measurements of the trace metals Zn, Cd, Cr, Ni, Pb, Cu, Fe and Al were performed on 53 wet atmospheric precipitation samples (snow and rainwater) collected at a central site of Tehran. Samples were collected using a bulk sampler equipped with a high-density polyethylene funnel from November to May in 2011 and 2012 on the roof of a building in the city centre. Trace metals in the filtered samples were measured with ICP-MS. Statistical analysis of the results revealed that Al, which is principally a crustal-derived element, was the highest mean measured concentration. The pH ranged from 4.2 to 7.1 with a mean value of 5.1. Crustal enrichment factors (EF_c) related to the relative abundance of elements in crustal material was calculated using Al as reference crustal. EF_c calculations indicated that samples were not enriched with Fe and Cr but were, fairly to extremely, enriched with Zn, Cd, Ni, Pb and Cu. Factor component analysis with varimax-normalized rotation was conducted to find the probable sources of the measured species. This resulted in two factors with eigenvalues greater than unity. Factor 1 showed an anthropogenic source, mostly industrial combustion and local traffic emissions, for Zn, Cd, Ni, Pb, and Cu while factor 2 showed a crustal contribution for Al, Fe and Cr.     

Monitoring the effects of chelating agents and electrical fields on active forms of Pb and Zn in contaminated soil

The application of electrical fields and chelating agents is an innovative hybrid technology used for the decontamination of soil polluted by heavy metals. The effects of four center-oriented electrical fields and chelating agents on active fractions of lead and zinc were investigated in this pot experiment. Ethylenediaminetetraacetic acid (EDTA) as a synthetic chelator and cow manure extract (CME) and poultry manure extract (PME) as natural chelators were applied to the pots (2 g kg^?1) 30 days after the first irrigation. Two weeks later, four center-oriented electrical fields were applied in each pot (in three levels of 0, 10, and 30 V) for 1 h each day for 14 days. The soil near the cathode and anodes was collected and analyzed as cathodic and anodic soil, respectively. Results indicated that the soluble–exchangeable fraction of lead and zinc were decreased in the cathodic soil, while the carbonate-bound fractions were increased. In the anodic soil, however, the opposite result was observed. EDTA enhanced the soluble–exchangeable form of the metals in both anodic and cathodic soils. Furthermore, the amounts of carbonate-bound heavy metals were increased by the application of CME in both soils. The organic-bound fraction of the metals was increased by the application of natural chelators, while electrical fields had no significant impacts on this fraction.