Evaluation of the effects of PFAS soil adsorption and transformation in the presence of divalent cations under ambient conditions

A bench‐scale study was conducted to evaluate the effect of divalent cations on the adsorption of perfluoroalkyl and polyfluoroalkyl substances (PFAS) onto soil particles. The study entailed batch testing of a synthetic soil mixture under a range of Epsom salt (soluble magnesium sulfate heptahydrate) concentrations. The synthetic soil was produced using a mix of sand, silt, clay, and organic matter that then was mixed and saturated with water collected from a PFAS‐impacted water source. The results indicate that variable concentrations of magnesium (divalent cation) had a minor effect on the sorption of perfluorooctane sulfonate with the highest sorption occurring in the strongest solution of Epsom salt. An unanticipated result of the test involved apparent biomediated transformation of polyfluorinated alkylated sulfonates (fluorotelomers or FTS) to perfluorooctanoic acid, perfluoroheptanoic acid (PFHpA), and perfluorononanoic acid. We believe this is the first time the complete transformation of 6:2 FTS to PFHpA has been observed and reported under ambient surface water‐like conditions within 6 months, a relatively short timeframe.     

Towards saving freshwater: halophytes as unconventional feedstuffs in livestock feed: a review

Water represents 71% of all earth area and about 97% of this water is salty water. So, only 3% of the overall world water quantity is freshwater. Human can benefit only from 1% of this water and the remaining 2% freeze at both poles of earth. Therefore, it is important to preserve the freshwater through increasing the plants consuming salty water. The future prosperity of feed resources in arid and semi-arid countries depends on economic use of alternative resources that have been marginalized for long periods of time, such as halophytic plants, which are one such potential future resource. Halophyte plants can grow in high salinity water and soil and to some extent during drought. The growth of these plants depends on the contact of the salted water with plant roots as in semi-desert saline water, mangrove swamps, marshes, and seashores. Halophyte plants need high levels of sodium chloride in the soil water for growth, and the soil water must also contain high levels of salts, as sodium hydroxide or magnesium sulfate. There are many uses for halophyte plants, including feed for animals, vegetables, drugs, sand dune stabilizers, wind shelter, soil cover, wetland cultivation, laundry detergents, and paper production. This paper will focus on the use of halophytes as a feed additive for animals. In spite of the good nutritional value of halophytes, some anti-nutritional factors as nitrates, nitrite complexes, tannins, glycosides, phenolic compounds, saponins, oxalates, and alkaloids may be present in some of them. The presence of such anti-nutritional agents makes halophytes unpalatable to animals, which tends to reduce feed intake and nutrient use. Therefore, the negative effects of these plants on animal performance are the only objection against using halophytes in animal feed diets. This review article highlights the beneficial impact of considering halophytes in animal feeding on saving freshwater and illustrates its nutritive value for livestock from different aspects.     

The dynamic analysis of renewable energy’s contribution to the dimensions of sustainable development and energy security

In sustainable development, energy is critical in human activities and shapes a sustainable future. Thus, it is an unignorable element in human development. This paper analyzes the contributions of renewable energy sources (RES)’s to the economic, environmental, and social dimensions of sustainable development. Moreover, we add energy security as a possible fourth dimension into the analysis. For the sample size, we limit the countries members of the OECD and run generalized methods of moments for the period from 1995 to 2015. This method can produce efficient estimators under the problems of endogeneity, omitted-variable bias, measurement errors, and heteroscedastic residuals. According to the results, RES has a small reducing effect (?.007%) on output in the Cobb-Douglas production function for the economic dimension. We found that RES has a positive contribution to the environmental dimension and abates the level of carbon emission (?.093%). RES also confirms the inverted-U shape of environmental Kuznets curve. In the social dimension, RES improves human development and a 1% increase in RES consumption causes to .0045% increase in human development. In the last contribution, RES has a positive effect on sustainable energy supply security in the context of electricity generation (.032%). Although the effects of RES on the environment, social, and energy security are significant, they are limited. These limitations point to barriers that can be overcome over time. Our conclusions recommend that these effects might flourish with technical developments and political support in the long run. Furthermore, public awareness, rising income level, and economies of scale are also beneficial in this process. As a result, RES might be an excellent source for a sustainable future and development. Especially, RES might have remarkable contributions to the 7th, 11th, 12th, and 13th goals of sustainable development.

     

Radiological hazard assessment of natural gross radioactivity in some cosmetic products

Many kinds of cosmetic products were analyzed to determine gross radioactivity. In this study, gross alpha/beta radioactivity concentrations in 51 cosmetic samples were determined. The examined cosmetic products consist of blusher, eye shadow, lipstick, nail polish, shampoo, hand cream, cellulite cream, baby powder, soap, and toothpaste. The gross alpha–beta activity concentrations were measured with a nuclear spectroscopic system which contains gas-flow proportional counters. The highest gross alpha/beta activity concentrations were found in eye shadow samples of 1.621Bq g^?1 for alpha and 6.471Bq g^?1 for beta. The total effective doses due to gross radioactivity for skin were calculated. Although the effective dose of eye shadow samples had the highest value, the effective doses due to gross radioactivity concentrations in this study were found to be lower than the radiological limits given by the authorities.     

Characterization and pollution potential assessment of Tunceli, Turkey municipal solid waste open dumping site leachates

Environmental monitoring of leachate quality from an open municipal solid waste dumping site in Tunceli, Turkey was studied in this research. The most commonly examined pollution parameters were determined on a seasonal basis. The annual average 5-day biological oxygen demand (BOD₅) and chemical oxygen demand (COD) values of station points were measured as 70 and 425 mg/L, respectively, and also the average BOD₅/COD ratio (a measure of biodegradability) was calculated as 0.20. The low ratio of biodegradability and slightly alkaline pH values in the leachate samples indicated that the site was characterized by methanogenic conditions. The mean ammonium-nitrogen (NH₄ ⁺-N) and corresponding phosphate (orthophosphate) values were assayed as 70 and 11 mg/L, respectively. The average solids content in the leachates was measured as 4,681 mg/L (total solids) and 144 mg/L (suspended solids). Very low concentrations of iron, manganese, copper, and zinc in the leachate samples were found and the concentration of cadmium was measured below detection limits. Excessive amount of nutrients and high organic and inorganic pollutant content in the leachates pose serious pollution potential to the environment. Since no drainage system or bio treatment exists in this open dumping site, high permeability of natural soil at the site and in the surrounding area and very fractured and crackled rocks under natural soil are indicators of high groundwater pollution potential in this site.     

Development of eco-efficient lightweight self-compacting concrete with high volume of recycled EPS waste materials

Environmental Science and Pollution Research - Reusing the industrial waste materials is one of the main aims of sustainability and achieve the environmental protection. However, concrete is the...     

Characterisation and Nanomechanical Properties of Ink-Jet Media Using Atomic Force Microscopy

Commercial inkjet media is increasingly used in daily life; this use ranges from offices to digital photography. The impact that the development of this technology has had on the paper industry has been phenomenal. However, an increasing amount of paper is discarded and it is often after the introduction of complex chemical ink within its substrate. The understanding of the interactions between the layer of coated media and ink can be used to further understand and develop technology for the use of recycling office and photo papers. This paper presents the innovative concept in characterizing the surface of the inkjet media by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Comparisons are made between the data obtained from both atomic force microscopy and scanning electron microscopy of the receptive layer and surface analysis software that was used to obtain surface characteristics. In this study the hardness and force of interaction has also been examined by the means of nanoindentation measurements using silicon nitride cantilever tips and forces of interaction between a selection of colloid probes and the receptive layer of the inkjet media. The effect of loading force on indentation was studied in terms of approach of impact and type of media tested.     

Characteristics and potential environmental impacts of sand material from sand dunes and uplifted marine terraces as potential borrow sites for beach nourishment along the Jordanian coast of the Gulf of Aqaba

The coastal zone management and development plans which include tourism development necessitate among many other management practices, the extension of the available area of the present natural but narrow, limited and widely eroded beaches by implementing some type of nourishment practices. The present work is providing information on selected sites as possible sources of suitable sand, chemical and granulometric characteristics of their sand, and the potential direct and long-term environmental effects and consequences of its use in any future nourishment practices. Seven sites located within the up-lifted terraces area along the Jordanian portion of the Gulf of Aqaba, were selected as potential sources or borrow sites for sand that may be used in any future nourishment projects. Two sites were selected at the northeastern side of Aqaba region to represent sand dunes. Sand material from these sites were analyzed for their physical characteristics (grain size) as well as their content of heavy metals, organic carbon, total nitrogen, total phosphorous, and calcium carbonate. Standard methodological techniques were used during analysis of all constituents. The results were compared with those obtained from the analysis of sand deposits of six beaches along the Jordanian coastline of the Gulf of Aqaba. Results indicate that sand of the selected borrow sites has grain size fractions that are suitable for use in beach nourishment. Results of the measured pollution indicators indicate that their levels in the sand of the potential borrow sites are within or lower than their levels in the marine and coastal sediments of the Gulf of Aqaba and the Red Sea. These properties, in addition to the wide occurrence and availability of such sources along the coasts of the Red Sea and the Gulf of Aqaba, suggest that it will be a cheep source of sand for beach extension and restoration and their use in large amounts in beach nourishment project will not pose major hazards on the quality of seawater of the Gulf of Aqaba area