Analysis of BTEX and other substituted benzenes in water using headspace SPME-GC-FID: method validation

The analysis of BTEX and other substituted benzenes in water samples using solid phase microextraction (SPME) and quantification by gas chromatography with flame ionization detection (GC-FID) was validated. The best analytical conditions were obtained using PDMS/DVB/CAR fibre using headspace extraction (HS-SPME) at 50 [degree]C for 20 min without stirring. The linear range for each compound by HS-SPME with GC/FID was defined. The detection limits for these compounds obtained with PDMS/DVB/CAR fibre and GC/FID were: benzene (15 ng L(-1)), toluene (160 ng L(-1)), monochlorobenzene (54 ng L(-1)), ethylbenzene (32 ng L(-1)), m-xylene (56 ng L(-1)), p-xylene (69 ng L(-1)), styrene (35 ng L(-1)), o-xylene (42 ng L(-1)), m-dichlorobenzene (180 ng L(-1)), p-dichlorobenzene (230 ng L(-1)), o-dichlorobenzene (250 ng L(-1)) and trichlorobenzene (260 ng L(-1)). This headspace SPME-GC-FID method was compared with a previously validated method of analysis using closed-loop-stripping analysis (CLSA). The headspace SPME-GC-FID method is suitable for monitoring the production and distribution of potable water and was used, in field trials, for the analysis of samples from main intakes of water (surface or underground) and from the water supply system of a large area (Lisbon and neighbouring municipalities).     

Spatial assessment of climate change effects on crop suitability for major plantation crops in Sri Lanka

Climate change is the main global challenge of this century; it is therefore imperative to identify its effects on agriculture in developing countries. This research makes spatial assessment of climate change effect on major plantation crops in Sri Lanka, with emphasis on crop suitability of tea, rubber, and coconut. Geo-referenced maps of spatial and temporal changes in crop suitability and production potentials are generated and compared. Data pertaining to six agro-ecological zones under the study area are analyzed for a period of 1980–2007. Crop suitability maps are generated amalgamating yield maps and climatic factors maps using AHP in multi-criteria analysis under two time frames of 1980–1992 and 1993–2007. Percent change in crop suitability and crop yield classes is calculated based on five crop suitability and five crop yield classes during two time frames. Dynamics of climatic parameters and crop yield are recognized using geo-referenced maps. The suitability maps of the two time frames are compared to identify the changes with each crop in conjunction with changes in the prevailing climate and yield. Geographic shift of suitability, yield, and climate classes are examined. Net gain or loss in crop production is quantified. Long-term annual rainfall significantly decreased in mid-country wet zone, whereas the mean temperature of the study area increased by 1.4°C. Results clearly showed that the climate and yield can be meaningfully related to the crop suitability and management.     

Nano-inspired systems in food technology and packaging

Creation of food-based nanomaterials for food processing and packaging applications is actually gaining in importance. Indeed, the design of a suitable food carrier system controls the encapsulation efficiency, the product stability and release of bioactives such as micronutrients, antimicrobial compounds and antioxidants. The smaller size of nanomaterials provides higher thermodynamic and kinetic stability. Whereas the higher surface area enhances compound solubility. Nanoemulsions both encapsulate bioactive compounds effectively and address the food safety concerns of the fresh produce associated with foodborne pathogens. Nanoliposomes encapsulate bioactive whey peptides and fat-soluble vitamins with improved functionalities. Encapsulated bioactive molecules are released by diffusion into the surrounding environment after degradation of the surrounding polymeric matrix.     

Metal-free oxidation of aldehydes to acids using the 4Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>·2H<Subscript>2</Subscript>O<Subscript>2</Subscript>·NaCl adduct

Oxidation of aldehydes to carboxylic acids is a major reaction. Conventionally, this reaction is carried out with oxidants and metal catalysts, thus producing unwanted metal waste. Recently, aqueous media have been used as an alternative for toxic organic solvents. Here, we tested the clathrate-structured, neutral hydrogen peroxide adduct 4Na₂SO₄·2H₂O₂·NaCl for the oxidation of aldehydes to acids in aqueous solution. We found that various aromatic, heteroaromatic and aliphatic aldehydes were selectively oxidized to corresponding acids in 70–98% yields. This simple acid–base treatment allows to separate easily the acid product in high purity without any organic solvent. Moreover, the adduct is produced using 25% H₂O₂, with inexpensive sodium sulphate, Na₂SO₄, and sodium chloride, NaCl. The adduct is a non-toxic white crystalline solid, readily soluble in water, and easy to handle.     

Factors influencing wastewater management performance: case study of housing estates in suburban Bangkok, Thailand

As population densities have risen and settlements become increasingly crowded, wastewater effluent volumes have, not unexpectedly, also risen. The adverse impacts of effluent from housing estates (HEs) in suburban areas of Thailand, served by local wastewater management (WWM) systems, are of particular concern. Because of this problem, which reflects the poor performance of WWM systems, it has become increasingly important that the pivotal factors that hinder WWM improvements be identified and effective solutions be proposed and implemented. The goal of the research described in this paper was to determine the critical factors influencing WWM performance at HEs in suburban Bangkok, using multiple regression analysis. Three significant factors encompassing financial, social, institutional and general aspects were identified for each type of WWM system (community centralized and onsite). For the community centralized system, the key factors were house price, type of organization managing the HE, and the attitudes of the organization. For onsite systems, the three factors were total number of house units, direct experience with water pollution and percentage of occupied houses. These findings reflect the importance of having a WWM that employs an integrated approach rather than focusing on specific aspects in isolation from other factors. WWM performance could be improved if significant factors indicating high priority concerns were to be identified and properly applied. Addressing the priority concerns could, consequently, contribute to the development of appropriate environmental management measures, plans, and policies related to HE WWM.     

Reutilization of thermostable polyester wastes by means of agglomeration with phenolic resins

We report on the possibility of obtaining organic polymeric matrixes allowing the development of new high performance fire-resistant products by recycling downsized thermostable waste materials. Phenolic resins have been used as binders for recycled waste. Furthermore, considering that reinforced plastic triturations have superior properties (chemical, mechanical, water resistance, etc.) to wood agglomerates, significant advantages over conventional materials are anticipated. In summary, we propose a viable solution to some of the known problems caused by the consumption of wood and to the needs of strengthened plastic processing engineering. Using resins as a binder, several fire-resistant prototypes were prepared from polyester waste, and their mechanical properties, thermal stability, and fire-resistant properties were analyzed.     

Effective coordination and integration of energy and transport policies for CO2 mitigation in Thailand

Cross-cutting government policies that are designed to mitigate CO₂ emissions have caused an increased interdependence between government agencies. This leads to fragmentation in the public administration of climate change mitigation. The need for more coordination among government agencies involved in drafting and implementing energy and transportation policies is necessary to create collaborative strategies that can affect energy demand and reduce CO₂ emissions. The study aims to use Thailand as a case study to examine and discuss how effective coordination and integration of energy and transport policies and actions in the domain of GHG mitigation in Thailand can be successful. The authors applied a mixed-method information gathering approach combined with data from panel discussions. A thorough literature review guided the evidence, which was reinforced by the expert opinions of 35 industry professionals and governmental officers. Importance-performance analysis was applied as a policy assessment method. The study proposes applying a combination of several factors and conditions regarding institutional aspects of transport and energy sectors into a new greater strategies and actions toward CO₂ mitigation. In findings, a combination of instruments and autonomy of sectors is the greatest important and successful opportunity to enable effective coordination and integration of policies for CO₂ mitigation. Insightful discussions on integrated approach and recommendations would contribute to collaboratively administrative mechanism.     

Trace elements in sediments in a city with agricultural development

The objective of this study was to determine the concentrations of trace elements in sediment samples taken from impermeable urban areas of a city with predominantly agroindustrial development characteristics. For this, samples were taken every month from paved streets in the city of Toledo, Paraná State (PR), Brazil. Thus, trace element levels were obtained through analysis performed by optical emission spectrometry with inductively coupled plasma. Levels of total organic carbon were also obtained through the dry combustion method. When compared to local background levels, the trace element levels were shown to be enriched in the following percentage proportions: barium (Ba) (45.4%), copper (Cu) (48.6%), chromium (Cr) (37.2%), manganese (Mn) (81.6%), nickel (Ni) (0%), lead (Pb) (40%), zinc (Zn) (283.7%), magnesium (Mg) (34.3%), and sodium (Na) (250.2%), whereas the carbon (C) percentages were around 1%. The most significant enrichment factors occurred for Ba, Cr, Pb, Zn, Mg, and Na. The highest rates occurred in geoaccumulation where the sediments were enriched by zinc. According to the principal guidelines, the concentrations obtained for cadmium (Cd), Cr, Cu, Ni, and Zn can cause adverse environmental impacts.     

A comparative analysis of wind resource parameters using WAsP and windPRO

This paper investigates the accuracy of the wind resource estimation for a site in a central India region using a latest licensed version of WAsP 11 and windPRO 3.1. Whole one year measured met mast wind data has been taken using anemometer and wind vane at 10 m and 25 m height, respectively above ground level. The digitized elevation and roughness model of the corresponding site shows the roughness class 4 (roughness length 1.2525 m). The wind data has been extrapolated up to 80 m height by using power and log law models which provide the power density near about 120 W/m². As per the micro sitting guidelines for the virtual wind farm installation 5D X 7D mapping has been selected which Indicates the total power output by installing 8 Vestas V-90 1.8 MW wind turbine from WAsP is 31.561 GWh and from windPRO is 28.083 GWh.     

Relevance study of bare and coated zero valent iron nanoparticles for lindane degradation from its by-product monitorization

Zero-valent iron nanoparticles (NZVI) as well as polymer–stabilized nanoparticles were synthesized and used for lindane (γ-hexachlorocyclohexane) degradation in aqueous solution. To study the effectiveness of the different coated nanoparticles, simple and rapid analytical methods have been developed to measure and to detect lindane and its by-products. For the monitorization of lindane degradation solid-phase extraction (SPE) was used, while volatile by-products formation measurement was carried out by headspace-solid phase microextraction (HS–SPME) followed by GC/MS. The SPE–GC/MS method provides low detection limits (0.2 μg L⁻¹), high recovery (above 95%) and it is a valuable tool for kinetic studies of the degradation process for each polymer used, while HS–SPME–GC/MS has proved to be an effective tool for the extraction and evaluation of volatile degradation by-products.