Arsenic residue in residential area after cleanup of pesticide illegal dumping sources in Thanh Hoa province,Central Vietnam

In Vietnam, Nicotex's site is perhaps the most infamous case of illegal disposal of toxic pesticides near residential areas. In 2013, affected villagers discovered illegal burials of around 1,000 tons of expired pesticides in the Nicotex factory. Organic pesticides were detected in illegal burial areas (IBAs) around 60 times greater than acceptable levels, but no attention was paid to contamination of metals, metalloids, and other classes of organic contaminants, which could be co-contaminants in pesticide formulation. This study assessed the contaminants remaining in the IBAs and surrounding residential areas two years after the source removal conducted in 2014. Additionally, a preliminary health risk assessment from residual contaminants was performed. Nine classes of chemicals including parental pesticides, inorganic and organic degradation byproducts, and metals and metalloids, comprising 123 chemicals were quantified in soil, sediment, and water samples from Nicotex and surrounding residential areas. Although concentrations of organic pesticides were below acceptable levels, arsenic contamination in the soil in a Nicotex IBA named NCT5 and Nap village (NV) exceeded the acceptable level. The enrichment factor and log-probability plot indicate that arsenic enrichment at NV is not from natural sources but is associated with arsenic contamination in NCT5. Arsenic may be a co-contaminant in pesticide manufacturing or an arsenical pesticide, such as monosodium methanearsonate. Arsenic found in NV was toxic arsenate for which the preliminary risk assessment yielded an unacceptable excess carcinogenic risk (1 × 10^?4). While all attention was paid to investigate and treat contamination of organic pesticides, it turns out that arsenic is the major existing threat which poses an unacceptable cancer risk in good agreement with the high cancer rate claimed by villagers near Nicotex. This justifies the need for further investigation of the extent of the arsenic contamination and restoration of the contaminated land.     

PCE dissolution and simultaneous dechlorination by nanoscale zero-valent iron particles in a DNAPL source zone

While the capability of nanoscale zero-valent iron (NZVI) to dechlorinate organic compounds in aqueous solutions has been demonstrated, the ability of NZVI to remove dense non-aqueous phase liquid (DNAPL) from source zones under flow-through conditions similar to a field scale application has not yet been thoroughly investigated. To gain insight on simultaneous DNAPL dissolution and NZVI-mediated dechlorination reactions after direct placement of NZVI into a DNAPL source zone, a combined experimental and modeling study was performed. First, a DNAPL tetrachloroethene (PCE) source zone with emplaced NZVI was built inside a small custom-made flow cell and the effluent PCE and dechlorination byproducts were monitored over time. Second, a model for rate-limited DNAPL dissolution and NZVI-mediated dechlorination of PCE to its three main reaction byproducts with a possibility for partitioning of these byproducts back into the DNAPL was formulated. The coupled processes occurring in the flow cell were simulated and analyzed using a detailed three-dimensional numerical model. It was found that subsurface emplacement of NZVI did not markedly accelerate DNAPL dissolution or the DNAPL mass-depletion rate, when NZVI at a particle concentration of 10g/L was directly emplaced in the DNAPL source zone. To react with NZVI the DNAPL PCE must first dissolve into the groundwater and the rate of dissolution controls the longevity of the DNAPL source. The modeling study further indicated that faster reacting particles would decrease aqueous contaminant concentrations but there is a limit to how much the mass removal rate can be increased by increasing the dechlorination reaction rate. To ensure reduction of aqueous contaminant concentrations, remediation of DNAPL contaminants with NZVI should include emplacement in a capture zone down-gradient of the DNAPL source.     

Empirical correlations to estimate agglomerate size and deposition during injection of a polyelectrolyte-modified Fe0 nanoparticle at high particle concentration in saturated sand

Controlled emplacement of polyelectrolyte-modified nanoscale zerovalent iron (NZVI) particles at high particle concentration (1-10 g/L) is needed for effective in situ subsurface remediation using NZVI. Deep bed filtration theory cannot be used to estimate the transport and deposition of concentrated polyelectrolyte-modified NZVI dispersions (>0.03 g/L) because particles agglomerate during transport which violates a fundamental assumption of the theory. Here we develop two empirical correlations for estimating the deposition and transport of concentrated polyelectrolyte-modified NZVI dispersions in saturated porous media when NZVI agglomeration in porous media is assumed to reach steady state quickly. The first correlation determines the apparent stable agglomerate size formed during NZVI transport in porous media for a fixed hydrogeochemical condition. The second correlation estimates the attachment efficiency (sticking coefficient) of the stable agglomerates. Both correlations are described using dimensionless numbers derived from parameters affecting deposition and agglomeration in porous media. The exponents for the dimensionless numbers are determined from statistical analysis of breakthrough data for polyelectrolyte-modified NZVI dispersions collected in laboratory scale column experiments for a range of ionic strength (1, 10, and 50mM Na(+) and 0.25, 1, and 1.25 mM Ca(2+)), approach velocity (0.8 to 55 × 10(-4)m/s), average collector sizes (d(50)=99 μm, 300 μm, and 880 μm), and polyelectrolyte surface modifier properties. Attachment efficiency depended on approach velocity and was inversely related to collector size, which is contrary to that predicted from classic filtration models. High ionic strength, the presence of divalent cations, lower extended adsorbed polyelectrolyte layer thickness, decreased approach velocity, and a larger collector size promoted NZVI agglomeration and deposition and thus limited its mobility in porous media. These effects are captured quantitatively in the two correlations developed. The application and limitations of using the correlations for preliminary design of in situ NZVI emplacement strategies is discussed.     

Nanoparticle aggregation: challenges to understanding transport and reactivity in the environment

Unique forms of manufactured nanomaterials, nanoparticles, and their suspensions are rapidly being created by manipulating properties such as shape, size, structure, and chemical composition and through incorporation of surface coatings. Although these properties make nanomaterial development interesting for new applications, they also challenge the ability of colloid science to understand nanoparticle aggregation in the environment and the subsequent effects on nanomaterial transport and reactivity. This review briefly covers aggregation theory focusing on Derjaguin-Landau-Verwey-Overbeak (DLVO)-based models most commonly used to describe the thermodynamic interactions between two particles in a suspension. A discussion of the challenges to DLVO posed by the properties of nanomaterials follows, along with examples from the literature. Examples from the literature highlighting the importance ofaggregation effects on transport and reactivity and risk of nanoparticles in the environment are discussed.