Translocation of Sb and Ti in an undisturbed floodplain soil after application of Sb2O3 and TiO2 nanoparticles to the surface

The pore water transport of antimony and titanium, applied as nanoparticles (NPs), was studied by spiking stable suspensions of two different nanomaterials on the surface of an undisturbed floodplain soil. For preparation of stable dispersions, two different strategies were followed. (i) Comparable to those used in industrial applications: titanium dioxide nanoparticles, with an average diameter of 99 nm, were prepared by high-energy ball milling in water, whereas for (ii) antimony trioxide (Sb(2)O(3); average diameter 121 nm) a dispersing agent (sodium salt of poly[(naphthaleneformaldehyde)sulfonate] (pNFS) in water) was used. The upper 17 cm of a floodplain soil (river Rhine, Germany) was sampled using the minimally invasive sediment or fauna incubation experiment (SOFIE? two compartment cell; 3 l volume each), which preserved the pore system of the soil. The cells were equipped with 450 and 100 nm filter probes at different depths providing a non-invasive sampling of the pore water. The pore water was sampled at different times (T = 0, 24, 48, 96 and 196 h) and analysed by inductively coupled plasma quadrupole mass spectrometry (ICP-QMS). Sb and Ti were transported via the pore water of the floodplain soil to a depth of 14 cm, corresponding to the maximum cell depth. The highest Sb concentration in the pore water was detected after 24 h at a depth of 5.5-8 cm. Although the spiked concentration was higher for Ti than for Sb, the total Ti concentration in the pore water of the spiked cell was lower. This indicates a stronger agglomeration of TiO(2) NPs or a more intensive interaction of Ti with the solid matrix and a faster transport of Sb towards deeper soil layers. The results show that metal(loid)s from metal oxide NPs are transported in the soil pore water and, hence, have the potential to act as the source of contamination of deeper soil layers after soil surface contamination.     

Development of indirect competitive ELISA using egg yolk-derived immunoglobulin (IgY) for the detection of Gentamicin residues

Gentamicin (Gent) is an aminoglycoside antibiotic being used in livestock sector. Gent residues could cause some genetic disorders by nonsense mutations. This study aimed to develop IgY-based ELISA for the detection of Gent in animal products. Gent was conjugated with Bovine serum albumin (BSA) by carbodiimide method for further immunization in the laying chickens. PEG-6000 extraction method was employed to extract IgY from the egg yolk. The titer of anti-Gent-IgY attained the peak of 1:256,000 after the 5^th booster immunization. Checkerboard titration confirmed that, anti-Gent IgY in 1:2,000 dilution could give an Optical Density (OD) 1.0 at 2 µg mL^?1 of Gent-OVA coating concentration. IgY-based indirect competitive ELISA (Ic-ELISA) showed that, the IC₅₀ value of anti-Gent IgY was 2.69 ng mL^?1 and regression curve equation was y = ?16.27x + 56.97 (R² = 0.95, n = 3), confirming that, the detection limit (LOD, IC₁₀ value) was 0.01 ng mL^?1. Recoveries from fresh milk, pork and chicken samples were ranged from 69.82% to 94.32%, with relative standard deviation lower than 10.88%. Our results suggested that generated anti-Gent IgY antibodies can be used in routine screening analysis of Gent residues in food samples.     

Contamination and source assessment of metals,polychlorinated biphenyls,and polycyclic aromatic hydrocarbons in urban soils from Addis Ababa,Ethiopia

Urban areas in developing countries are facing vast environmental problems as a result of rapid urbanization and industrialization. Of major concern is the contamination of soils which are increasingly becoming sinks for environmental pollutants. However, to date only little is known about the pollution in the megalopolises of developing countries. The aim of this study was to assess the contamination and potential sources of metals, polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) in the urban environment of Addis Ababa, the capital of Ethiopia. The investigation revealed the presence of most of the analyzed pollutants in soil and sediment samples with total concentrations (dry wt) of PAHs ranging from 186 to 3150?µg?kg^?1, PCBs from 0.4 to 19?µg?kg^?1, Cu from 14 to 173?mg?kg^?1, Zn from 36 to 440?mg?kg^?1, Pb from 9 to 700?mg?kg^?1, and Ni from 16 to 72?mg?kg^?1. In addition, polyaromatic sulfur heterocycles, typical for oil and petrol residues, were detected in several soil samples. Source identification approaches revealed that Pb, Zn, and Cu are most likely derived from pyrolytic sources, with elevated values in samples related to waste combustion and traffic emissions. Ni is most probably of geogenic origin. For PCBs it is indicated that they are derived from a single source. However, correlations with technical PCB mixtures were inconsistent. PAHs originate from the combustion of biomass, vehicular exhausts, and petrogenic sources.     

Simulating the effects of urbanization,afforestation and cropland abandonment on a regional carbon balance: a case study for Central Germany

The newly developed model system HILLS is used to simulate recent (1990–2000) and future (up to 2020) changes in land use and carbon sequestration over Central Germany. HILLS is unique as that it integrates the spatially explicit land-use-change model LUC-Hesse with the dynamic ecosystem model Century under a GIS platform. With this new tool, the concurrent effects of urbanization, afforestation and cropland abandonment on regional carbon sequestration are analyzed for an exemplary “Business as Usual” scenario. During the simulation period, afforestation was estimated to sequester 880 Gg C and cropland abandonment 783 Gg C. Urbanization was estimated to release 336 Gg C formerly stored in soil organic matter and thereby offsets about 20% of the C sequestered by cropland abandonment and afforestation. The case study shows that urbanization can partly counteract the benefits of carbon sequestration resulting from other land-use changes and should be investigated in other carbon balances.     

Chlorination of para-substituted phenols: Formation of α, β-unsaturated C4-dialdehydes and C4-dicarboxylic acids

Despite the widespread occurrence of phenols in anthropogenic and natural compounds, their fate in reactions with hypochlorous acid (HOCl), one of the most common water treatment disinfectants, remains incompletely understood. To close this knowledge gap, this study investigated the formation of disinfection by-products (DBPs) in the reaction of free chlorine with seven para-substituted phenols. Based on the chemical structures of the DBPs and the reaction mechanisms leading to their formation, the DBPs were categorized into four groups: chlorophenols, coupling products, substituent reaction products, and ring cleavage products. In contrast to previous studies that investigated the formation of early-stage chlorophenols, the primary focus of this study was on the elucidation of novel ring cleavage products, in particular α, β-unsaturated C₄-dialdehydes, and C₄-dicarboxylic acids, which, for the first time, were identified and quantified in this study. The molar yields of 2-butene-1,4-dial (BDA), one of the identified α, β-unsaturated C₄-dialdehydes, varied among the different phenolic compounds, reaching a maximum value of 10.4% for bisphenol S. Molar yields of 2-chloromaleic acid (Cl-MA), one of the identified C₄-dicarboxylic acids, reached a maximum value of 30.5% for 4-hydroxy-phenylacetic acid under given conditions. 2,4,6-trichlorophenol (TCP) was shown to be an important intermediate of the parent phenols and the C₄-ring cleavage products. Based on the temporal trends of α, β-unsaturated C₄-dialdehydes and C₄-dicarboxylic acids, their formation is likely attributable to two separate ring cleavage pathways. Based on the obtained results, an overall transformation pathway for the reaction of para-substituted phenols with free chlorine leading to the formation of novel C₄ ring cleavage products was proposed.