Use of slag for dye removal

Adsorption techniques employing activated carbon have been found to be reasonably effective in the removal of some of the ionic impurities in water. However, economic considerations may require the use of inexpensive sorbents which are either naturally available or available as waste products from manufacturing processes. Slag is one such waste product obtained during the manufacture of steel, and the present study investigates dye removal characteristics of slag from colored waters. Aqueous solutions prepared from commercial grade acid, basic, and disperse dyes were used in this study, and batch pH, kinetic, and isotherm studies were undertaken on a laboratory scale. The data were evaluated for applicability to the Langmuir, Freundlich, and BET isotherm models, and the removal capacity of slag was compared with that of granular activated carbon. Results indicated approximately 94% removal of the disperse dye by slag, compared with a removal of approximately 49% achieved by activated carbon. Removal of acid dyes (dyes containing anionic groups) was reasonably good (approximately 47 and 74%), though not as good as obtained using activated carbon (approximately 100%). Column studies were conducted with a disperse dye (nonionic, slightly soluble in water), and analysis of data showed a sorption capacity of 1.3 mg of disperse dye per gram of slag. However, effluent dye concentrations were found to be higher than the permissible levels for discharge to receiving waters.     

Municipal solid waste management in Nepal: practices and challenges

Solid waste management in Kathmandu valley of Nepal, especially concerning the siting of landfills, has been a challenge for over a decade. The current practice of the illegal dumping of solid waste on the river banks has created a serious environmental and public health problem. The focus of this study was to carry out an evaluation of solid waste management in Nepal based on published information. The data showed that > or =70% of the solid wastes generated in Nepal are of organic origin. As such, composting of the solid waste and using it on the land is the best way of solid waste disposal. This will reduce the waste volume transported to the landfill and will increase its life.     

Thallium: a review of public health and environmental concerns

Thallium (Tl) is a rare but widely dispersed element. All forms of thallium are soluble enough to be toxic to living organisms. Thallium is more toxic to humans than mercury, cadmium, lead, copper or zinc and has been responsible for many accidental, occupational, deliberate, and therapeutic poisonings since its discovery in 1861. Its chemical behavior resembles the heavy metals (lead, gold and silver) on the one hand and the alkali metals (K, Rb, Cs) on the other. It occurs almost exclusively in natural waters as monovalent thallous cation. The solubility of thallous compounds is relatively high so that monovalent thallium is readily transported through aqueous routes into the environment. Tl can be transferred from soils to crops readily and accrues in food crops. The fascinating chemistry and high toxicity potential make thallium and its compounds of particular scientific interest and environmental concern. Thallium was detected in base-metal mining effluents. The conventional removal of heavy metals from wastewater has little effect on thallium. In this review, various treatment options and removal technologies are enumerated in order to protect the environment from thallium toxicity.     

A bench-scale investigation of land treatment of soil contaminated with diesel fuel.

A bench-scale investigation (soil pan testing) was conducted with the objective of studying degradation rates of diesel contaminated soil (2500 and 10,000 ppm by weight of total petroleum hydrocarbons (TPH) to dry weight of soil) under different treatment conditions over a 17 week testing period. The greatest degradation of the diesel contaminated soil was obtained with the addition of nutrients (Co = 10,000 ppm of TPH; k = 0.19 week-1). 'k' for soil not amended with nutrients was 0.07 week-1. The control cell (C0 = 2500 ppm TPH), with sodium azide (to suppress degradation) was compared with an experimental cell of 2500 ppm initial concentration of TPH without nutrient amendment. The control cell exhibited a relatively low uniform degradation (k = 0.08 week-1) of TPH over the duration of the experiment with reasonable first-order kinetic regression statistics.     

Decolorization of dye wastewaters by biosorbents: A review

Dye wastewater is one of the most difficult to treat. There has been exhaustive research on biosorption of dye wastewater. It is evolving as an attractive option to supplement conventional treatment processes. This paper examines various biosorbents such as fungi, bacteria, algae, chitosan and peat, which are capable of decolorizing dye wastewaters; discusses various mechanism involved, the effects of various factors influencing dye wastewater decolorization and reviews pretreatment methods for increasing the biosorption capacity of the adsorbents. The paper examines the mismatch between strong scientific progress in the field of biosorption and lack of commercialization of research.     

An analysis of the 'Modified Sturm Test' data

The 'Modified Sturm Test' uses carbon dioxide production as the primary end point in assessing the biodegradation potential of organic chemicals. This test was conducted by a commercial laboratory to assess the potential biodegradability of an oil stabilizer sample from an oil company in Canada. There was a high percentage conversion of total organic carbon present in the sample but carbon dioxide measured was low. Many possibilities were analyzed in this paper in order to understand the situation. The analysis showed that the test was subject to criticism from the point of view of CO2 measurement, 10-day window period, and aeration/mixing conditions.     

Biological filtration for removal of arsenic from drinking water

The main objective of the study was to find a suitable iron to arsenic ratio in water to reduce arsenic to 5 μg/L or lower through sand filtration. Experiments were conducted by varying the quantity of iron(II) while keeping the arsenic concentration at 100 μg/L. A mixture of iron (II) and arsenic at different ratios (10:1, 20:1, 30:1 and 40:1) was pumped to the sand filters in a down flow mode and effluent arsenic and iron were analyzed. It was found that a ratio of iron to arsenic of 40:1 was necessary to ensure an effluent arsenic concentration of 5 μg/L or lower. Iron in the filtrate was found to be below 0.1 mg/L at all times.     

Land application of phosphorus-laden sludge: a feasibility analysis

An investigation was conducted to examine aerobic digestion of the phosphorus-laden sludge produced at the Regina Wastewater Treatment Plant and feasibility of land use of this sludge combined with the dewatered anaerobically digested primary sludge from this plant. Experimental studies showed that aerobic digestion can be employed for the stabilization of the chemical sludge. Results of the feasibility analysis showed that mixing the two digested sludges met the heavy metal criteria set by various guidelines for agricultural use, presented the advantage of an increased concentration of nutrients and a decreased concentration of heavy metals, and a longer useful life of the agricultural site compared to using dewatered anaerobically digested primary sludge alone. Land application of the mixed digested sludges would be a more appropriate method of sludge disposal compared to the present practice of landfilling the dewatered sludge and lagooning the chemical sludge.     

Adsorption and photocatalytic degradation of bisphenol A using TiO2 and its separation by submerged hollowfiber ultrafiltration membrane

This study evaluates the adsorption ability ofbisphenol A（BPA） on titanium dioxide（TiO2） and its effect on the photocatalysis by advanced oxidation process using UV radiation and TiO2 photocatalyst. Degradation of BPA was also evaluated for the system without adsorption prior to photocatalytic reaction. The separation of TiO2 from BPA solution treated by pilot-scale photocatalytic reactor （capacity 0.16 m^3） was studied using submerged ultrafiltration （UF） membrane. It was found that although adsorption capacity of BPA was not high, adsorption played an important role in improving the efficiency ofphotocatalysis. On the other hand, during the separation of TiO2 particles from aqueous suspension, the permeate flux of the membrane was strongly affected by transmembrane pressure and TiO2 dose. The permeate turbidity was decreased below 1 NTU.     

Arsenic contamination of groundwater in the Terai region of Nepal: an overview of health concerns and treatment options

A review of published information on the arsenic contamination of groundwater in the Terai regions of Nepal showed that the source was mainly geogenic due to the dissolution of the arsenic-bearing minerals. Clinical observations of patients in the arsenic affected districts revealed chronic arsenic poisoning from drinking water. Half a million people inhabiting the region are believed to have been exposed to arsenic levels greater than 50 microg/L in their drinking water. Thirty-one percent of the population (3.5 million) in the region are estimated to have been exposed to arsenic levels between 10 and 50 microg/L. Iron assisted biosand filters currently distributed and in operation are a suitable alternative to mitigate the interim arsenic standard of 50 microg/L, as set by the Nepal Government. Arsenic biosand filters were also effective in removing bacteria and viruses from drinking water in laboratory and field tests. However, groundwater treatment targeting cluster communities in the Terai region is the sustainable way of mitigating the arsenic problem.