Flexible and high-efficiency Sb2S3/solid carrier solar cell at low light intensity

Environmental Chemistry Letters - Producing green and efficient energy sources is a major challenge. As a consequence, the use of photovoltaic devices for conversion of light into electricity is...     

Influence of the organic complex concentration on adsorption of herbicide in organic modified montmorillonite

This study was undertaken to determine the impact of the organic complex concentration on the adsorption of herbicide (acetochlor) at the surface of the organic modified montmorillonite. In this work, natural montmorillonite from Bogovina (Boljevac municipality, Serbia) was used for organic modification. Cation-exchange capacity of this montmorillonite was determined using a methylene blue method (86 mmol/100 g of clay). Montmorillonite has been modified first with NaCl and then with hexadecyltrimethylammonium bromide (HDTMA-bromide) organic complex. Saturation of cation exchange capacity (CEC) was 50%, 100%, and 150%. Changes in the properties of the inorganic and organic montmorillonite have been examined using the X-ray diffraction, Fourier transform infrared spectroscopy, and batch equilibrium method. Montmorillonite modified with HDTMA-bromide demonstrated higher uptake of the herbicide, compared to the inorganic montmorillonite. Comparing the values Freundlich coefficients in batch equilibrium method, it can be seen that the adsorption of acetochlor decreased in the series: 0.5 CEC HM > 1 CEC HM > 1.5 CEC HM > NaM.     

Water ultrasound-assisted oxidation of 2-oxo-1,2,3,4-tetrahydropyrimidines and benzylic acid salts

Environmental Chemistry Letters - Nitrogen six-membered heterocyclic compounds, such as pyrimidines, are of synthetic interest because they constitute an important class of natural and synthetic...     

Efficient phytoremediation of uranium mine tailings by tobacco

This investigation shows that tobacco plant roots and leaves accumulate 60?times more uranium than previously reported. Phytoremediation is a convenient technique to clean up polluted soils using herbaceous plants and trees. Increasing research aims to identify novel plant species that accumulate toxic metals. Tobacco plant (Nicotiana tabacum L.) is a promising cultivar for phytoremediation because tobacco is fast growing and easily propagated. Here, we study phytoremediation of uranium by two tobacco varieties Virginia and Burley, bred in natural conditions. Plants were grown on uranium mine tailings with an average uranium content of 15.3?mg?kg^?1. Each shoot sample was cross-sectioned into five uniform groups of leaves and stem segments. Results show a substantial variance in uranium uptake according to the section elderliness and origin of the plant parts. The highest concentrations of uranium values recorded in leaves of Burleys and Virginias nearest root shoot sections were 4.18 and 3.50?mg?kg^?1, respectively. These values are 60?times higher rates than those previously published for leaves of cultivars grown under similar conditions. Taking into account the level of soil contamination, the content of accumulated uranium demonstrates uranium hyperaccumulatory properties of tobacco plant and its potential utilization in phytoremediation of uranium-contaminated mediums.     

Examination of the influence of phenyltrimethylammonium chloride (PTMA) concentration on acetochlor adsorption by modified montmorillonite

The results presented in this paper show an impact of the concentration of the aromatic organic cation on the adsorption of acetochlor on the surface of the organic-modified montmorillonite. Natural montmorillonite from Bogovina (Boljevac municipality, Serbia) was used for organic modification in this experiment. Cation exchange capacity of this montmorillonite (86 mmol 100 g^?1 of clay) was determined using the methylene blue method. In pretreatment, montmorillonite was modified with NaCl. For the purpose of organic modification, three different concentrations of phenyltrimethylammonium chloride (PTMA) have been selected, based on calculated CEC value: 43 mmol 100 g^?1 of clay (0.5 CEC), 86 mmol 100 g^?1 of clay (1 CEC) and 129 mmol 100 g^?1 of clay (1.5 CEC). The changes in the properties of the inorganic and organic modified montmorillonite were examined using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and batch equilibrium method. Freundlich coefficients show higher uptake of the herbicide by montmorillonite modified with PTMA, compared to inorganic-modified montmorillonite. The results also indicate the influence of the organic cation concentration on the adsorption of the selected herbicide.     

Occurrence of aflatoxin M1 in human milk samples in Vojvodina,Serbia: Estimation of average daily intake by babies

The objectives of the study were to determine the aflatoxin M1 content in human milk samples in Vojvodina, Serbia, and to assess the risk of infants' exposure to aflatoxins food contamination. The growth of Aspergillus flavus and production of aflatoxin B1 in corn samples resulted in higher concentrations of AFM1 in milk and dairy products in 2013, indicating higher concentrations of AFM1 in human milk samples in 2013 and 2014 in Serbia. A total number of 60 samples of human milk (colostrum and breast milk collected 4–8 months after delivery) were analyzed for the presence of AFM1 using the Enzyme Linked Immunosorbent Assay method. The estimated daily intake of AFM1 through breastfeeding was calculated for the colostrum samples using an average intake of 60 mL/kg body weight (b.w.)/day on the third day of lactation. All breast milk collected 4–8 months after delivery and 36.4% of colostrum samples were contaminated with AFM1. The greatest percentage of contaminated colostrum (85%) and all samples of breast milk collected 4–8 months after delivery had AFM1 concentration above maximum allowable concentration according to the Regulation on health safety of dietetic products. The mean daily intake of AFM1 in colostrum was 2.65 ng/kg bw/day. Results of our study indicate the high risk of infants' exposure, who are at the early stage of development and vulnerable to toxic contaminants.     

Measuring Patterns of Urban Development: New Intelligence for the War on Sprawl

In this article, we compute a variety of measures of urban form (or sprawl) for neighbourhoods of varying age in five study areas in the US to illustrate urban development patterns. Our analysis suggests that some characteristics of development patterns differ significantly within and across study areas and over time; this raises doubt about the utility of sprawl indexes for entire metropolitan areas. The findings suggest, for advocates of 'smart growth', that the good news is that single family lot sizes are falling, density is getting higher and neighbourhoods are becoming more internally accessible. For the same advocates, the bad news, however, is more extensive: houses are becoming larger, neighbourhoods are becoming more isolated, land uses remain separated and pedestrian accessibility to commercial uses is falling. If these trends continue, it is likely that housing will remain unaffordable, traffic congestion will only get worse and developments will be unsustainable.     

GIS and the Analytic Hierarchy Process for Regional Landfill Site Selection in Transitional Countries: A Case Study From Serbia

The Serbian National Waste Management Strategy for the Period 2010–2019, harmonized with the European Union Directives, mandates new and very strict requirements for landfill sites. To enable analysis of a number of required qualitative and quantitative factors for landfill site selection, the traditional method of site selection must be replaced with a new approach. The combination of GIS and the Analytic Hierarchy Process (AHP) was selected to solve this complex problem. The Srem region in northern Serbia, being one of the most environmentally sensitive areas, was chosen as a case study. Seventeen factors selected as criteria/sub-criteria were recognized as most important, divided into geo-natural, environmental, social and techno-economic factors, and were evaluated by experts from different fields using an AHP extension in Arc GIS. Weighted spatial layers were combined into a landfill suitability map which was then overlapped with four restriction maps, resulting in a final suitability map. According to the results, 82.65% of the territory of Srem is unsuitable for regional landfill siting. The most suitable areas cover 9.14%, suitable areas 5.24%, while areas with low and very low suitability cover 2.21 and 0.76% of the territory, respectively. Based on these findings, five sites close to two large urban agglomerations were suggested as possible locations for a regional landfill site in Srem. However, the final decision will require further field investigation, a public acceptance survey, and consideration of ownership status and price of the land.     

Chemical transport models

Background, aim, and scope  Improving the parameterization of processes in the atmospheric boundary layer (ABL) and surface layer, in air quality and chemical transport models. To do so, an asymmetrical, convective, non-local scheme, with varying upward mixing rates is combined with the non-local, turbulent, kinetic energy scheme for vertical diffusion (COM). For designing it, a function depending on the dimensionless height to the power four in the ABL is suggested, which is empirically derived. Also, we suggested a new method for calculating the in-canopy resistance for dry deposition over a vegetated surface. Materials and methods  The upward mixing rate forming the surface layer is parameterized using the sensible heat flux and the friction and convective velocities. Upward mixing rates varying with height are scaled with an amount of turbulent kinetic energy in layer, while the downward mixing rates are derived from mass conservation. The vertical eddy diffusivity is parameterized using the mean turbulent velocity scale that is obtained by the vertical integration within the ABL. In-canopy resistance is calculated by integration of inverse turbulent transfer coefficient inside the canopy from the effective ground roughness length to the canopy source height and, further, from its the canopy height. Results  This combination of schemes provides a less rapid mass transport out of surface layer into other layers, during convective and non-convective periods, than other local and non-local schemes parameterizing mixing processes in the ABL. The suggested method for calculating the in-canopy resistance for calculating the dry deposition over a vegetated surface differs remarkably from the commonly used one, particularly over forest vegetation. Discussion  In this paper, we studied the performance of a non-local, turbulent, kinetic energy scheme for vertical diffusion combined with a non-local, convective mixing scheme with varying upward mixing in the atmospheric boundary layer (COM) and its impact on the concentration of pollutants calculated with chemical and air-quality models. In addition, this scheme was also compared with a commonly used, local, eddy-diffusivity scheme. Simulated concentrations of NO₂ by the COM scheme and new parameterization of the in-canopy resistance are closer to the observations when compared to those obtained from using the local eddy-diffusivity scheme. Conclusions  Concentrations calculated with the COM scheme and new parameterization of in-canopy resistance, are in general higher and closer to the observations than those obtained by the local, eddy-diffusivity scheme (on the order of 15–22%). Recommendations and perspectives  To examine the performance of the scheme, simulated and measured concentrations of a pollutant (NO₂) were compared for the years 1999 and 2002. The comparison was made for the entire domain used in simulations performed by the chemical European Monitoring and Evaluation Program Unified model (version UNI-ACID, rv2.0) where schemes were incorporated.