佳木斯台形变观测对东北地区几次浅震“场兆”异常的探讨

大地震在主破裂前往往行成地壳变形,高应力作用下进入峰值后的变形阶段,反映到地倾斜观测日均值曲线上,表现为固体潮形变趋势异常,这些异常能否指示远距离的地震,近年来不少研究者发现,远场前兆往往出现在对应力、应变变化反应灵敏的特殊构造部位。佳木斯台可能处于这种特殊的构造部位,对东北地区浅源地震短期前兆异常“场兆”的趋势性变化具有一定的意义。     

Testing of the Storm Water Management Model Low Impact Development Modules

Stormwater infrastructure designers and operators rely heavily on the United States Environmental Protection Agency’s Storm Water Management Model (SWMM) to simulate stormwater and wastewater infrastructure performance. Since its inception in the late 1970s, improvements and extensions have been tested and evaluated rigorously to verify the accuracy of the model. As a continuation of this progress, the main objective of this study was to quantify how accurately SWMM simulates the hydrologic activity of low impact development (LID) storm control measures. Model performance was evaluated by quantitatively comparing empirical data to model results using a multievent, multiobjective calibration method. The calibration methodology utilized the PEST software, a Parameter ESTimation tool, to determine unmeasured hydrologic parameters for SWMM’s LID modules. The calibrated LID modules’ Nash–Sutcliffe efficiencies averaged 0.81; average percent bias (PBIAS) ?9%; average ratio of root mean square error to standard deviation of measured values 0.485; average index of agreement 0.94; and the average volume error, simulated vs. observed, was +9%. SWMM accurately predicted the timing of peak flows, but usually underestimated their magnitudes by 10%. The average volume reduction, measured outflow volume divided by inflow volume, was 48%. We had more difficulty in calibrating one study, an infiltration trench, which identified a significant limitation of the current version of the SWMM LID module; it cannot simulate lateral exfiltration of water out of the storage layers of a LID storm control measure. This limitation is especially severe for a deep LIDs, such as infiltration trenches. Nevertheless, SWMM satisfactorily simulated the hydrologic performance of eight of the nine LID practices.     

Electrochemical machining characteristics and resulting surface quality of the nickel-base single-crystalline material LEK94

Nickel-base single-crystalline materials such as LEK94 possess excellent thermo-mechanical properties at high temperatures combined with low density compared to similar single-crystalline materials used in aero engines. Since the components of aero engines have to fulfil demanding safety standards, the machining of the material used for these components must result in a high geometrical accuracy in addition to a high surface quality. These requirements can be achieved by electrochemical and precise electrochemical machining (ECM/PECM). In order to identify proper machining parameters for PECM the electrochemical characteristics dependent on the microstructure and the chemical homogeneity of LEK94 are investigated in this contribution. The current density was found to be the major machining parameter affecting the surface quality of LEK94. It depends on the size of the machining-gap, the applied voltage and the electrical conductivity of the electrolyte used. Low current densities yield inhomogeneous electrochemical dissolution of different microstructural areas of the material and lead to rough surfaces. High surface qualities can be achieved by employing homogenous electrochemical dissolution, which can be undertaken by high current densities. Furthermore, a special electrode was developed for the improvement of the quality of side-gap machined surfaces.     

Halogenated organic contaminants in marine fish and mussels from southern Greenland--pilot study on relations to trophic levels and local sources

Mussels and marine fish (shorthorn sculpin and Greenland cod) were sampled at three locations with varying human activity. Fish livers and mussels were analysed for polychlorinated biphenyls (PCBs), polybrominated diphenylethers (PBDEs) and chlorinated pesticides including chlordane and toxaphene. Levels of chlorinated contaminants in shorthorn sculpins from the background location, [capital Sigma]PCB (217-224 ng g(-1) lw), [capital Sigma]DDT (180 ng g(-1) lw) and hexachlorobenzene (32-44 ng g(-1) lw), were in the same range as previously observed in eastern Greenland but exceeded the levels previously observed in southern and western Greenland. Multivariate analysis showed that pollutant concentrations were mainly explained by trophic levels of the species (cod > sculpins > mussels). A pooled sample of shorthorn sculpins from the harbour of Qaqortoq had significantly higher PCB and PBDE concentrations with a different congener pattern compared to the background site, while other contaminants were comparable. This points towards local pollution sources, possibly accumulated emissions from burning of waste.     

Polybrominated diphenyl ethers (PBDEs) in marine fish and blue mussels from southern Greenland

Levels of polybrominated diphenyl ethers (PBDEs) have not previously been reported in Greenland. In this study shorthorn sculpins (Myoxocephalus scorpius) were sampled at three locations in southern Greenland; Usuk (no population), Igaliko (population 40) and Qaqortoq (population 3200). Furthermore uvak (Gadus ogac), spotted wolffish (Anarhichas minor), starry ray (Raja radiata), and blue mussels (Mytilus edulis) were collected at Usuk. Pooled samples of fish liver and blue mussel were analysed for lower brominated PBDEs (BDE-47, BDE-99, BDE-100 and BDE-153). The highest PBDE levels were found in Qaqortoq followed by Igaliko and Usuk. The measured sum PBDE concentrations in shorthorn sculpin collected at Qaqortoq, Igaliko and Usuk, were 8.2, 3.1 and 2.1 all in units of microg kg(-1) wet weight. In female and male uvak collected at Usuk PBDE levels of 7.1 and 12.0 microg kg(-1) wet weight were measured, while the concentrations were 1.2 microg kg(-1) in spotted wolffish, 1.4 microg kg(-1) in starry ray and 0.11 microg kg(-1) in blue mussels from the same locality all measured on a wet weight basis. The highest concentrations were measured in uvak, a top-predator on fish indicating that PBDEs are biomagnifying. The level of tetra-hexa BDEs is 15-24 times lower than PCB levels measured in the same samples, except for shorthorn sculpin collected at Qaqortoq, where the level of PBDEs was 40 times lower than the level of PCBs. The high concentration of PCBs relative to PBDEs in shorthorn sculpin collected at Qaqortoq signifies a local emission of PCBs, which is higher than the local emission of PBDEs.