Prenatal diagnosis of the fragile X using thymidine induction

Eleven pregnancies in ten patients at risk for the fragile X were monitored by amniocentesis or chorion villus biopsy and induction of the fragile site using thymidine, methotrexate and FUdR. Three female fetuses and one male fetus were found to have the fragile X. The results obtained using thymidine induction were superior to those using methotrexate induction and probably better than those obtained using FUdR induction.     

二氧化硫排放总量控制若干问题的思考

根据国家《“十一五”规划纲要》对削减二氧化硫排放总量的要求，在对电力行业脱硫现状及前景的具体阐述中指出实现这个目标的可能性，并从多方面对二氧化硫总量控制的关键问题进行了详尽的论述与分析。     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

Modeling porosity reductions caused by mineral fouling in continuous-wall permeable reactive barriers

A study was conducted to assess key factors to include when modeling porosity reductions caused by mineral fouling in permeable reactive barriers (PRBs) containing granular zero valent iron. The public domain codes MODFLOW and RT3D were used and a geochemical algorithm was developed for RT3D to simulate geochemical reactions occurring in PRBs. Results of simulations conducted with the model show that the largest porosity reductions occur between the entrance and mid-plane of the PRB as a result of precipitation of carbonate minerals and that smaller porosity reductions occur between the mid-plane and exit face due to precipitation of ferrous hydroxide. These findings are consistent with field and laboratory observations, as well as modeling predictions made by others. Parametric studies were conducted to identify the most important variables to include in a model evaluating porosity reduction. These studies showed that three minerals (CaCO3, FeCO3, and Fe(OH)2 (am)) account for more than 99% of the porosity reductions that were predicted. The porosity reduction is sensitive to influent concentrations of HCO3-, Ca2+, CO3(2-), and dissolved oxygen, the anaerobic iron corrosion rate, and the rates of CaCO3 and FeCO3 formation. The predictions also show that porosity reductions in PRBs can be spatially variable and mineral forming ions penetrate deeper into the PRB as a result of flow heterogeneities, which reflects the balance between the rate of mass transport and geochemical reaction rates. Level of aquifer heterogeneity and the contrast in hydraulic conductivity between the aquifer and PRB are the most important hydraulic variables affecting porosity reduction. Spatial continuity of aquifer hydraulic conductivity is less significant.     

西部某气田井场分离器液相管线法兰腐蚀原因分析

目的 解决西部某气田井场分离器液相出口管线法兰严重腐蚀问题。方法 通过宏观形貌观察、无损检测、化学成分分析、金相组织分析、力学性能测试、腐蚀区域微观形貌观察、腐蚀产物物相分析以及腐蚀电化学实验的方法,分析该法兰发生腐蚀的原因。结果 A105制法兰与316L制密封圈存在较强的电偶腐蚀倾向。结论 电偶腐蚀是导致法兰面严重腐蚀的主要原因,另外,液相管线停用前放空不彻底,法兰底部存在积液,导致气液界面位置叠加发生水线腐蚀。根据法兰腐蚀原因提出了针对性的防腐建议。     

大数据环境下企业安全绩效管理的基础性问题*

为明晰大数据对安全绩效管理的影响,把握信息时代下企业安全绩效管理的研究方向,基于大数据时代下安全绩效管理内容,阐述数据驱动下安全绩效管理的应用优势,探讨数据驱动下安全绩效管理的研究变革,剖析大数据环境下企业安全绩效管理的数据流向,构建数据驱动下安全绩效管理的框架模型,并提出数据驱动下企业安全绩效管理应用对策。结果表明:基于大数据的安全绩效管理有助于提升企业安全管理水平,也为安全生产系统优化提供理论依据。     

利用Landsat7反演的亮温与土地覆盖类型相关性分析

随着城市人口的急剧增加,城市建筑规模迅速膨胀,大量热源集中排放,产生了城市内部温度明显高于郊区的特殊城市气候现象,即“热岛效应”.以安徽省芜湖市为研究区域,采用GIS叠加分析方法、缓冲区分析方法进行地表辐射亮温与土地覆盖类型的相关性研究.研究结果表明,辐射亮温与地表类型有明显的相关关系,建筑与辐射亮温的相关系数为0.87,植被、水体与辐射亮温的相关系数分别为0.59、0.78.人工建筑因素是产生热岛效应的主要原因之一,加大植被、水体在城市土地用地中的比重,是控制城市热岛效应行之有效的方法,而且利用辐射亮温图可很好地指示城市土地覆盖类型在时间上和空间上的变化.     

长期施肥对红壤稻田耕层土壤碳储量的影响

以红壤性稻田土壤为对象,研究了长期施肥（1990～2006年）对稻田表层土壤碳储量及固碳潜力的影响,讨论了耕层厚度变化对碳储量估算及处理间差异的影响.研究发现,与长期施用化肥相比,有机物的循环利用能显著提高红壤性稻田土壤碳储量,其碳储量为57.7～66.2 t/hm²,比试验前高出18.7～27.2 t/hm²,而长期施用化肥碳储量提高幅度平均为5.4 t/hm².红壤性稻田土壤饱和固碳量为84.0 t/hm²,与目前碳储量相比还有17.8～43.7 t/hm²的固碳潜力.研究证实,土壤碳储量与土壤容重和表层土壤厚度的变化密切相关,以20 cm或23 cm作为统计厚度估算表层土壤的碳储量将分别低估20.6％和11.3％,其中有机物施用处理碳储量低估幅度最大（分别为26.8％和18.9％）;另外,用相同统计厚度进行碳储量估算减小了不同施肥处理间的差异.从稻田土壤碳储量及固碳潜力来考虑,有机物配合化肥施用是红壤稻田较优的施肥方式.     

管理措施对农田生态系统土壤呼吸的影响

为研究管理措施(氮肥施用和耕翻措施)对农田土壤呼吸的影响,采用静态暗箱-气相色谱法对农田生态系统的土壤呼吸作用进行了5个生长季(2002~2003年小麦,2003年玉米、大豆,2003~2004年小麦,2004年玉米,2004~2005年小麦)的野外观测试验.结果表明,冬小麦基肥(2002-11-09)、返青肥(2003-02-14)和拔节肥(2003-03-26)施用后2周内氮肥施用处理的土壤呼吸速率明显高于对照,但不同施氮水平间的土壤呼吸速率无显著差异.耕翻对土壤呼吸的影响效应受到前茬作物类型的制约.在2003~2004年的冬小麦生长季(其前茬种植的作物为水稻),不耕和浅耕处理的平均土壤呼吸速率之间无显著差异(p>0.05).在2004年玉米生长季浅耕比不耕处理显著增加了土壤呼吸速率(p<0.05),而在后茬的2004~2005年小麦生长季浅耕比不耕又显著降低了土壤呼吸速率(p<0.05).在前茬作物为水稻的麦田(2004~2005年小麦生长季),深耕比不耕处理显著增加了土壤CO2排放量.不同管理措施下,农田土壤呼吸与土壤温度的关系均可用指数方程描述,针对不同管理措施下拟合得到的指数方程求得的Q10值在1...