Seasonality and microhabitat selection in a forest-dwelling salamander

Many small terrestrial vertebrates exhibit limited spatial movement and are considerably exposed to changes in local environmental variables. Among such vertebrates, amphibians at present experience a dramatic decline due to their limited resilience to environmental change. Since the local survival and abundance of amphibians is intrinsically related to the availability of shelters, conservation plans need to take microhabitat requirements into account. In order to gain insight into the terrestrial ecology of the spectacled salamander Salamandrina perspicillata and to identify appropriate forest management strategies, we investigated the salamander’s seasonal variability in habitat use of trees as shelters in relation to tree features (size, buttresses, basal holes) and environmental variables in a beech forest in Italy. We used the occupancy approach to assess tree suitability on a non-conventional spatial scale. Our approach provides fine-grained parameters of microhabitat suitability and elucidates many aspects of the salamander’s terrestrial ecology. Occupancy changed with the annual life cycle and was higher in autumn than in spring, when females were found closer to the stream in the study area. Salamanders showed a seasonal pattern regarding the trees they occupied and a clear preference for trees with a larger diameter and more burrows. With respect to forest management, we suggest maintaining a suitable number of trees with a trunk diameter exceeding 30 cm. A practice of selective logging along the banks of streams could help maintain an adequate quantity of the appropriate microhabitat. Furthermore, in areas with a presence of salamanders, a good forest management plan requires leaving an adequate buffer zone around streams, which should be wider in autumn than in spring.     

Risk assessment of linear alkylbenzene sulphonates, LAS, in agricultural soil revisited: robust chronic toxicity tests for Folsomia candida (Collembola), Aporrectodea caliginosa (Oligochaeta) and Enchytraeus crypticus (Enchytraeidae)

To obtain robust data on the toxicity of LAS, tests with the collembolan Folsomia candida L., the oligochaetes Aporrectodea caliginosa Savigny (earthworm) and Enchytraeus crypticus Westheide and Graefe (enchytraeid) were performed in a sandy loam soil. Additionally limited tests with LAS spiked to sewage sludge, and subsequently mixed into soil, were performed. For the endpoint of interest, reproduction in soil, we found an EC10 of 205 mg LAS kg(-1) soil [8.6-401] [95% confidence limits] for F. candida and an EC10 of 46 mg LAS kg(-1) soil [13-80] for A. caliginosa after 28 days. E. crypticus was not affected by concentrations up to 120 mg LAS kg(-1) soil. When adding (low contaminated) non-spiked sludge to soil, high stimulation of reproduction was observed for E. crypticus and A. caliginosa but not for F. candida. We argue that this difference in stimulative response between the tested species is related to the difference in feeding behaviour. Sludge spiked with LAS did not significantly affect the reproduction of F. candida (fertility: number of juvenile offspring) and A. caliginosa (fecundity: number of cocoons) (dose equivalent to 181 g and 91 g LAS kg(-1) sludge, respectively). Significantly reduced reproduction was observed for E. crypticus (at 120 mg LAS kg(-1) soil+sludge corresponding to 72 g LAS kg(-1) sludge) compared to non-spiked sludge. The reproduction by E. crypticus was, however, comparable to the reproduction observed in the control soil without sludge. Compared to LAS directly spiked to soil, the reproductive output of organisms exposed to spiked sludge was either not significantly different (F. candida, E. crypticus) or significantly improved (A. caliginosa). More studies are needed in order to make firm conclusions on the potential effect of artificially contaminated sludge in soil systems.     

Dioxin screening in fish product by pattern recognition of biomarkers

Two alternative, cost- and time-effective dioxin screening methods relying on two categories of potential lipid biomarkers were investigated. A dioxin range varying from 1.1 to 47.1 pg PCDD/F TEQ-WHO/g lipid using 64 fish meal samples was used for model calibration. The methods were based on multivariate models using either (1) fatty acid composition monitored by GC-FID or (2) fluorescence landscape signals analysed using the PARAFAC model and in both cases predicting dioxin content as pgPCDD/F TEQ-WHO/g lipid. In both cases, Partial Least Squares (PLS) regression was performed for predicting the dioxin content of a sample. The GC-FID data analyses was based on automatic peak alignment and integration, enabling extraction of the area of 140 peaks from the gas chromatograms, as opposed to the 31 fatty acids usually considered for fish oil characterisation. In addition to classic PLS employing the whole dataset for calibration, a two-step local PLS modeling approach was performed based upon an initial selection of k number of calibration samples providing the best match to the prediction sample using a so-called k Nearest Neighbors (kNN) approach, then followed by PLS calibration on these kNN selected samples for dioxin prediction. Fluorescence spectroscopy offers a promising non-invasive and ultra-rapid technique, with less than two minutes analysis time. However, fluorescence spectroscopy using the pattern recognition "kNN-PLS" yielded a correlation of 0.76 (r2) and a high root mean square error of prediction of 11.4 pg PCDD/F TEQ-WHO/g lipid. The predictions were improved when the PLS calibration was performed on all the sample with a root mean square error of prediction of 7.0 pg PCDD/F TEQ-WHO/g lipid. Unfortunately, these results failed to demonstrate the potential of fluorophore monitoring as a screening method. In contrast, the overall best screening performance was obtained with the fatty acid profile, when the kNN-PLS combination employed for pattern recognition (kNN) all the areas of the 140 detected peaks and the PLS regression used the areas of 46 selected peaks. This "kNN-PLS" prediction with three latent variables and based upon the 12 nearest neighbors selected out of the 64 x 2 fatty acid profiles (duplicate analyses), yielded a correlation of 0.85 (r2) and a root mean square error of prediction of 2.1 pg PCDD/F TEQ-WHO/g lipid and resulted in a total analysis time of one and half hour per sample.     

POPs in the Lagoon of Venice: budgets and pathways

Dioxins and furans (PCDD/Fs), polychlorobiphenyls (PCBs) and hexachlorobenzene (HCB) in the ecosystem of the Lagoon of Venice were studied, in order to provide a general picture of conditions in the lagoon in terms of contamination by persistent organic pollutants (POPs). We present here novel data on atmospheric deposition, water, sediment and clam samples collected in the lagoon during the period January 2001-December 2004. Atmospheric deposition was sampled monthly at six sites located both close and far from large industrial and urban sources. Water samples were collected monthly from fifteen stations, and twenty-five samples of sediments and clams (Tapes philippinarum) were collected in four areas where clams are farmed and harvested inside the lagoon. All samples were analysed for PCDD/Fs, PCBs and HCB by HRGC/HRMS in the same laboratory. All samples examined (atmospheric deposition and water) substantially confirmed the spatial pattern reported in previously published data on sediments and atmospheric deposition: the zone surrounding the Porto Marghera petrochemical plant always had the highest levels of POPs (i.e., PCDD/Fs: atmosphere approximately 6 pg of 2,3,7,8-TCDD equivalents (I-TE) m(-2)d(-1); water 0.37 pg I-TEl(-1); sediment: 300 ng kg(-1); clam 2.8 pg I-TE g(-1)), and the minima were found at points on the margins of the lagoon (PCDD/Fs: atmosphere approximately 1 pg I-TEm(-2)d(-1); water 0.05 pg I-TEl(-1); sediment: approximately 5 ng kg(-1); clam approximately 0.2 pg I-TE g(-1)). Intermediate values were often encountered in the historical city centre of Venice and in the central part of the lagoon. To confirm this, new data on correlation between levels of PCDD/F in sediments and clams are reported, both for absolute values and for the PCDD/F "fingerprint". There is always a clear fingerprinting signature (PCDF/PCDD>1) for samples collected near Porto Marghera, and the opposite (PCDF/PCDD<1) in the rest of the lagoon.     

An experimental apparatus for testing biodiesels based on a CFR engine—setup and validation with different methyl ester blends

A cooperative fuel research (CFR) engine was modified and instrumented in order to control operating conditions and to measure engine parameters and in-cylinder pressure diagrams. Aiming at the comparison of different alternative fuels, an experimental procedure was defined, including cetane number (CN) evaluation and the definition of engine operating quantities in different working points, for fixed levels of compression ratio (CR) and injection advance. An investigation was made considering several blends of methyl-esters of rapeseed oil (RME) and of a mix of vegetable oils (VOME) with conventional diesel oil. The defined experimental procedure was applied to assess CN, engine brake thermal efficiency (bte) and exhaust emissions. Results show that the biodiesel content has a positive influence on soot emissions, with strong reduction, while thermal efficiency and NO_X emissions are negatively affected, which can be justified taking into account fuel properties and changes in combustion process. As observed outcomes are generally in line with those presented in literature, the facility proved to be a suitable tool for basic investigations on alternative fuels to be used in specific applications.     

Estuarine circulation in the Taranto Seas

The Taranto basin is a shallow water marine system in the South of Italy characterized by the presence of a lagoon environment together with a semi-enclosed bay connected to the Ionian Sea. This marine system experienced over the last few decades strong biochemical pollution and environmental degradation, and it is considered a hotspot study site for economic, ecological and scientific reasons. The aim of this study was to examine, on an annual temporal scale and with high spatial resolution, the main hydrodynamical processes and transport scales of the system by means of a 3D finite element numerical model application, adopting the most realistic forcing available. The model allowed us to assess the role played by baroclinic terms in the basin circulation, describing its estuarine nature. In particular, the main features of water circulation, salinity and temperature distribution, water renewal time and bottom stress were investigated. Our results allowed us to equate this system dynamic to that of a weakly stratified estuary, identifying the main driving sources of this mechanism. The vertical stratification over the whole year was proved to be stable, leading to a dual circulation flowing out on the surface, mainly through Porta Napoli channel, and inflowing on the bottom mainly through Navigabile channel. This process was responsible also for the renewal time faster on the bottom of the Mar Piccolo basin than the surface. Due to the great importance of the Taranto basin for what concerns sediment pollution, also the effect of currents in terms of bottom stress was investigated, leading to the conclusion that only in the inlets area the values of bottom stress can be high enough to cause erosion.     

Sediment pollution and dynamic in the Mar Piccolo of Taranto (southern Italy): insights from bottom sediment traps and surficial sediments

Major and trace element, PAH, and PCB concentrations were measured in surface sediments and particles from sediment traps collected in the First and Second Basin of the Mar Piccolo (Gulf of Taranto) in two periods (June–July and August–September, 2013). The aim of the study was to evaluate pollution degree, sediment transport and particle redistribution dynamic within the area. Results confirm the higher contamination of sediments from the First Basin observed by previous researches, particularly for Cu, Hg, Pb, total PAHs, and total PCBs. Advective transport from the First to the Second Basin appears to be the leading transfer mechanism of particles and adsorbed contaminants, as evidenced by measured fluxes and statistical analyses of contaminant concentrations in surficial sediments and particles from sediment traps. Long-range selective transports of PAHs and microbial anaerobic degradation processes for PCBs have been also observed. These results are limited to a restricted time window but are consistent with the presence of transport fluxes at the bottom of the water column. This mechanism deserves further investigation and monitoring activities, potentially being the main responsible of pollutant delivering to the less contaminated sectors of the Mar Piccolo.     

Eulerian and Lagrangian time scales of the turbulence above staggered arrays of cubical obstacles

Environmental Fluid Mechanics - We present results from water-channel experiments on neutrally-stable turbulent flows over staggered arrays of cubical obstacles modelling idealised urban canopies....     

Hydrocarbon emission fingerprints from contemporary vehicle/engine technologies with conventional and new fuels

The present paper presents results from the analysis of 29 individual C₂–C₉ hydrocarbons (HCs) specified in the European Commission Ozone Directive. The 29 HCs are measured in exhaust from common, contemporary vehicle/engine/fuel technologies for which very little or no data is available in the literature. The obtained HC emission fingerprints are compared with fingerprints deriving from technologies that are being phased out in Europe. Based on the total of 138 emission tests, thirteen type-specific fingerprints are extracted (Mean ± SD percentage contributions from individual HCs to the total mass of the 29 HCs), essential for receptor modelling source apportionment. The different types represent exhaust from Euro3 and Euro4 light-duty (LD) diesel and petrol-vehicles, Euro3 heavy-duty (HD) diesel exhaust, and exhaust from 2-stroke preEuro, Euro1 and Euro2 mopeds. The fuels comprise liquefied petroleum gas, petrol/ethanol blends (0–85% ethanol), and mineral diesel in various blends (0–100%) with fatty acid methyl esters, rapeseed methyl esters palm oil methyl esters, soybean oil methyl or sunflower oil methyl esters. Type-specific tracer compounds (markers) are identified for the various vehicle/engine/fuel technologies.An important finding is an insignificant effect on the HC fingerprints of varying the test driving cycle, indicating that combining HC fingerprints from different emission studies for receptor modelling purposes would be a robust approach.The obtained results are discussed in the context of atmospheric ozone formation and health implications from emissions (mg km^?1 for LD and mopeds and mg kW h^?1 for HD, all normalised to fuel consumption: mg dm^?3 fuel) of the harmful HCs, benzene and 1,3-butadiene.Another important finding is a strong linear correlation of the regulated “total” hydrocarbon emissions (tot-HC) with the ozone formation potential of the 29 HCs (ΣPO₃ = (1.66 ± 0.04) × tot-RH; r² = 0.93). Tot-HC is routinely monitored in emission control laboratories, whereas C₂–C₉ are not. The revealed strong correlations broadens the usability of data from vehicle emission control laboratories and facilitates the comparison of the ozone formation potential of HCs in exhaust from of old and new vehicle/engine/fuel technologies.     

Concentrations of PCDD/PCDF in soil close to a secondary aluminum smelter

Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs) were analyzed in samples of the emissions from a secondary aluminum smelter (ALS) and soil samples around the plant. The purpose was to estimate the impact of the emissions on the surrounding environment.PCDD/F soil concentrations were higher in the proximity of the plant, exceeding the limit adopted in Italy in soils for green areas and residential uses and the upper limit of several reference concentrations. The most contaminated sites were less than 500 m from the plant and the dioxin concentration with the distance from the ALS.Principal component analysis (PCA) showed that emissions from the ALS were the source of PCDD/F contamination in the soils closest to the plant. Multivariate data analyses such as PCA are therefore useful to identify sources of emission causing contamination.