Elemental composition of sediments in Lake Jinzai, Japan: Assessment of sources and pollution

Bottom sediments from Lake Jinzai in southwest Japan were analyzed to determine their chemical compositions and to assess the potential for ecological harm by comparison with sediment quality guidelines. The pollution status of lake sediments was evaluated by employing contamination factor (CF), pollution load index (PLI), and geoaccumulation index (I(geo)), focusing on a suite of elements in lakebed and core sediments. Elevated concentrations of As, Pb, Zn, Cu, TOC, N, and P were present in several layers of the upper core and other surface sediments. The elevated metal concentrations are likely related to the fine-grained nature of the sediments, reducing bottom conditions produced by abundant organic matter, and possibly minor non-point anthropogenic sources. Moreover, correlations between the concentrations of trace metals and organic carbon, nitrogen, phosphorus, and iron, suggest that these elements play a role in controlling abundances. Calculated CF, PLI, and I(geo) indicate that the sediments are strongly polluted with respect to As, moderately to strongly polluted with Zn, and moderately polluted with Pb and Cu. Metal concentrations exceed the New York State Department of Environmental Conservation (NYSDEC) lowest effect level and the Canadian Council of Ministers of the Environment (CCME) interim sediment quality guidelines that indicate moderate impact on aquatic organisms in the study area.     

Separation of plastic mixtures using liquid-fluidized bed technology

Separation of heavier-than-water plastic mixtures had been investigated via the fluidization of their packed beds induced by an upward flow of water. The samples examined were resin pellets and crushed plastic products including PVC, PET and PBT. On the onset of a flow, a mixed bed was swelled to the state of fluidization and separated into layers of respective resins depending on their density. The effects of the flow rate, an amount of the samples and their density difference were examined on the separation of resin pellets. Under an appropriate condition, the process was completed within a few minutes, and satisfactory separation was attained when the density difference of the samples exceeded 0.05 g cm-3. By using a column equipped with several sample outlets sorted resins could be recovered with their purity intact by withdrawing each layer successively from above through a suitable outlet. Multi-stage separation was also found to be effective in treating close-density samples. Compared with uniform-sized resin pellets, size distribution of crushed plastic samples deteriorated the separation to some extent.     

Recent sedimentary environment of coastal lagoon in southwestern Japan: evidence from major and trace elements

A geochemical study of the bottom sediments of Lake Shinji and the River Ohashi in southwestern Japan was carried out to determine their elemental compositions and to evaluate the pollution status of lake sediments by employing enrichment factor (EF), pollution load index (PLI), and geoaccumulation index (I _geo). Present-day water quality was also assessed. Results showed that the water quality of Lake Shinji contrasts slightly between the upper and lower parts. The chemical composition of the sediments, as measured by X-ray fluorescence, included major and trace elements and total sulfur (TS). Average abundances of As, Pb, Zn, Cu, Ni, and Cr in the Shinji sediments were 10, 29, 143, 27, 19, and 54 ppm, respectively, compared to 6, 18, 57, 16, 10, and 37 ppm in the river sediments. Based on the EF, PLI, and I _geo, the lake sediments are moderately to strongly polluted with respect to As, moderately polluted with Pb, Zn, and Cr, and unpolluted with Cu and Ni. The high EF and I _geo for As, Pb, and Zn in the lake sediments indicate that metal concentration has occurred in Shinji. Increases in the abundances of these metals are likely related to the fine-grained nature of the sediments, reducing conditions of the bottom sediments, enrichment in organic matter, and possibly a minor contribution from non-point anthropogenic sources. Trace metal contents are strongly correlated with Fe₂O₃ and TS, suggesting that Fe oxides and sulfides play a role in controlling abundances in the investigated areas.     

Detoxification of hexachlorobenzene by dechlorination with potassium-sodium alloy

Dechlorination of hexachlorobenzene (HCB) was achieved by a liquid potassium–sodium (K–Na)-alloy. HCB in a cyclohexane/benzene solution (22 mmol/l, 4.67 g/l as chlorine) was dechlorinated by almost 100% after a 30-min reaction, indicating high reactivity of K–Na alloy and high proton donating power of cyclohexane. Decreasing orders of chlorobenzenes identified after a 15-min reaction, by amount were 1,2,3,4- > 1,2,3,5- > 1,2,4,5- for tetrachlorobenzenes, 1,2,4- > 1,2,3- > 1,3,5- for trichlorobenzenes, and 1,4- > 1,3- > 1,2- for dichlorobenzenes. It was hypothesized that once one chlorine atom in HCB was replaced with a proton, the adjacent chlorine atom to the proton tended to be replaced with another hydrogen atom. A total of 63 PCBs formed via the Wurtz–Fittig reaction were identified as by-products in the sample after a 15-min reaction. Among PCBs found, 2,3^′,4^′,5-tetrachlorobiphenyl, which was a product from 1,2,4-trichlorobenzene formed via the Wurtz–Fittig reaction, was detected in relatively high concentration (48.9 nmol/ml). The sample obtained from a reaction mixture after 30 min contained only 14 PCBs in trace amounts, indicating that the PCBs formed were also further dechlorinated by K–Na alloy. Non-chlorinated compounds––such as methylbenzene, dimethylbenzene, dimer of tetrahydrofuran, and dicyclohexyl (dimer of cyclohexane)––were also identified in the samples. A method using K–Na alloy developed in the present study dechlorinated satisfactorily HCB at room temperature.     

A Bayesian approach to probabilistic ecological risk assessment: risk comparison of nine toxic substances in Tokyo surface waters

Background, aim, and scope  

Quantitative risk comparison of toxic substances is necessary to decide which substances should be prioritized to achieve effective risk management. This study compared the ecological risk among nine major toxic substances (ammonia, bisphenol-A, chloroform, copper, hexavalent chromium, lead, manganese, nickel, and zinc) in Tokyo surface waters by adopting an integrated risk analysis procedure using Bayesian statistics.     

Abundances, distribution, and sources of trace metals in Nakaumi–Honjo coastal lagoon sediments, Japan

Bottom sediments from Nakaumi Lagoon and the Honjo Area in southwest Japan were analyzed to determine their geochemical compositions and to assess potential impacts by comparison with sediment quality guidelines. Present-day water quality was also assessed. Results showed that the water quality of Nakaumi Lagoon and the Honjo area contrasts between their upper and lower parts. Average abundances of As, Pb, Zn, Cu, Ni, and Cr in the Nakaumi sediments were 12, 25, 135, 32, 21, and 46 ppm, respectively, compared to 10, 24, 110, 26, 20, and 38 ppm in the Honjo area. All averages are greater than those of the upper continental crust. The elevated metal concentrations are probably related to the fine-grained nature of the sediments, reducing bottom conditions produced by abundant organic matter and possibly minor non-point anthropogenic sources. Trace metal contents are strongly correlated with Fe₂O₃, suggesting that Fe oxides play a role in controlling abundances. Metal concentrations exceed the NYSDEC lowest effect level and CCME interim sediment quality guidelines that indicate moderate impact on aquatic organisms. Average abundances of As and Zn are comparable to the Coastal Ocean Sediment Database threshold, whereas maximum concentrations exceed that value, indicating that the concentrations of these metals are potentially toxic. These enrichments suggest that regular monitoring may be desirable even where no point sources of metal pollution exist.     

Feminization of genetic males by a symbiotic bacterium in a butterfly,Eurema hecabe (Lepidoptera: Pieridae)

Wolbachia are symbiotic bacteria found in many arthropods and filarian nematodes. They often manipulate the reproduction of host arthropods. In the present study, female-biased sex-ratio distortion in the butterfly Eurema hecabe was investigated. Breeding experiments showed that this distorted sex ratio is maternally inherited. When treated with tetracycline, adult females of the thelygenic line produced male progeny only. After PCR using Wolbachia-specific primers for the ftsZ gene a positive result was seen in the thelygenic females, but not in male progeny from tetracycline-treated females, or individuals from a Tokyo population with normal sex ratio and reproduction. Cytological observations showed that thelygenic females lack the sex chromatin body (W chromosome). The results strongly suggest that the sex-ratio distortion in E. hecabe is due to feminization of genetic males by Wolbachia.