Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

How does population structure affect pollutant discharge in China? Evidence from an improved STIRPAT model

Environmental Science and Pollution Research - China is the most populous country in the world, and the pollution caused by the excessive population should not be underestimated. In recent years,...     

芦苇植株对湿地温室气体排放的影响及其日变化特征

利用静态箱-气相色谱法对夏季(7月、8月和9月)长江河口湿地芦苇植被CO_2、CH_4和N_2O的叶面通量、茎秆扩散速率以及沉积物通量的日变化进行研究。结果显示,通过芦苇叶片排放的N_2O与CH_4的量分别为2.99μg/(m~2·h)和15.36μg/(m~2·h),CO_2则呈现白天吸收(-120.86 mg/(m~2·h))、夜间排放(69.39 mg/(m~2·h))的特点。芦苇茎秆N_2O、CH_4和CO_2平均扩散速率分别为1.96μg/h、142.45μg/h和10.69 mg/h,沉积物平均排放通量为N_2O 8.18μg/(m~2·h)、CH_41.58 mg/(m~2·h)、CO_2169.66 mg/(m~2·h)。芦苇茎秆和沉积物界面CH_4和CO_2的排放均呈现出明显的"单峰型"昼夜变化规律,其排放峰值集中在日照及温度最高的9:00至15:00。芦苇植株是影响温室气体排放变化的因素之一。芦苇植株在光合作用下吸收CO_2并促进CH_4的排放,而芦苇发达的根系及茎秆是温室气体排放的主要途径。同时,Pearson相关性分析表明温度对芦苇群落CH_4和NO2的排放影响显著,但与CO_2通量的相关性不明显。土壤氧化还原电位对3种气体的排放均有显著影响。     

大气细菌,霉菌数量与风速相关性初探

通过对大气细菌数量、霉菌数量与风速相关性的研究,得出齐市地区冬季气候寒冷,无相关性;春季气候干燥,风沙大,有相关性;雨后大气细菌数量与风速无相关性,大气霉菌数量与风速相关。     

大兴安岭西坡中生代火山岩形成机制

依据火山喷发特点、火山岩岩石组合及火山岩的同位素年代学证据,大兴安岭西坡地区发育的大量中生代火山岩可分为三个放回,自早而晚依次为：晚侏罗世的塔木兰沟族回、上库力旋回和早白垩世的伊列克得旋回。不同旋回火山岩具有不同的地质、地球化学特征。在岩浆起源、源区性质和演化过程等方面,不同族回火山岩既有相似之处,也存在明显差别。火山岩为深部作用和过程的产物,对其形成机制的研究,有助于理解本区中生代发生的剧烈的火山岩浆作用和成矿作用的构造背景及演化过程。     

有效微生物技术在渗滤液处理中的应用与发展

介绍了有效微生物(EM)的组成、特点及其处理废水的机理;通过与传统的生化法处理垃圾渗滤液的比较,指出了利用EM技术处理垃圾渗滤液的优势,认为该技术不仅能够提高污染物的去除效率,降低污泥产量,而且能够缩短反应器的响应时间;并介绍了EM制剂在国内外的生产情况,对今后EM技术的发展前景提出了展望.     

问渠那得清如许--记福建丰泉集团有限公司

具有国际权威的经济合作与发展组织(CECD)研究认为,环保产业技术已与生物技术、信息技术并列为当代最具发展潜力的三大技术领域。环保产业已成为全球性的“朝阳产业”。 中国的环保产业自二十世纪七十年代起步至今,经过近三十年的发展,全国环保相关产业单位达到18000多个,从业人员300多万,年收入近1700亿元,出口总额14多亿美元。全     

海37引信回转体座冷挤压工艺

回转体座是海37引信中的关键件,要求有一定的机械强度、耐磨性.研制期间,曾用压铸铝合金,由于铝合金压铸内部存在着气孔,表面粗糙.不能满足其机械性能的要求.针对这一现象,研制了回转体座冷挤压成形工艺,零件表面质量好,成本低,满足了产品的机械性能要求.     

“赛力奇”的致突变性研究

选用Ａｍｅｓ试验、小鼠骨髓细胞微核实验和小鼠显性致死突变试验对新型食品添加剂“赛力奇”的致突变性进行了检验。结果表明：三项试验的结果均生。根据国家《食品安全性毒理学评价程序（试行）》的规定，认为“赛力奇”无致突变性。