Analysis of polycyclic aromatic hydrocarbons (PAHs) in airborne particles by direct sample introduction thermal desorption GC/MS

The technique of thermal desorption (TD)–GC/MS was evaluated for measuring airborne, 4–6 ring polycyclic aromatic hydrocarbons (PAHs) collected onto quartz filters. TD provides a more readily automated and sensitive alternative to traditional solvent extraction, decreasing the time/cost of analysis and reducing the risk of analyte loss or sample contamination. The developed method was successfully applied to the analysis of PAH standard solutions loaded on sorbent tubes packed with quartz wool and the graphitized carbon black sorbent Carbograph2. The optimized method showed high desorption efficiency over the whole range of target PAHs with good precision, linearity and sensitivity. The proposed method was verified on an urban dust Standard Reference Material (SRM 1649a); the experimentally determined concentrations agreed with the certified ranges (95% confidence limit) for all target compounds except benzo[a]anthracene, which fell just outside the narrow certified range. The desorption efficiency and the reproducibility of the method was evaluated by analysing pieces of real sample filters sampled from urban air for a period of 24 h. The results confirmed the homogeneity of the filter and showed high recovery efficiencies for all target PAHs.     

Numerical analysis of the anaerobic co-digestion of the organic fraction from municipal solid waste and wastewater: prediction of the possible performances at Olmeto plant in Perugia (Italy).

Anaerobic digestion is mainly used for sewage sludge stabilization and for treatment of waste that has a high organic content. It also represents a powerful method for obtaining energy by means of natural gas production. Co-digestion particularly combines different organic substrates to generate a homogeneous mixture as input to the anaerobic reactor in order to increase process performance. Reactions kinetics and knowledge of process analysis represent the keys for good planning and correct management. In this paper a model to simulate the main reactions involved in anaerobic co-digestion is presented. The model was created to analyse the possible performance of the treatment plant in Olmeto, Marsciano (Perugia) in Italy. The plant is still in an experimental phase with regard to the co-digestion process and numerical simulations represent a useful tool during development of the correct management procedures for the operational phase and a good methodoly for addressing further pilot plant experiments.     

Effect of modified Fenton treatment on the thermal behavior of contaminated harbor sediments

This study presents the results of experimental Fenton-like treatments conducted on marine sediment slurries (2g sediment vs. 20 ml liquid). The sediment was collected in a harbor situated in a high density industrial area, characterized by a great hydrocarbon C>12 and PAHs contamination. The investigated parameters were: the H(2)O(2) dose, the reagent's pH and the effect of a phosphate salt and ferrous iron addition. To evaluate sediment's characteristics COD, particle size, thermogravimetric and differential thermal analyses were performed under N(2) and O(2) atmosphere while dissolved organic carbon and COD analyses were performed on the filtrate. Results indicate that the treatment was able to change the organic matter to a less hydrophobic state, to destroy part of the organic carbon (up to 78% decrease of the 200-400 degrees C labile organic matter), to lower the COD of the sediment (60% COD removal maximum) and to increase the cumulated distribution undersize. In addition as the treated sediment showed easier-to-handle characteristics, reduced caking and lower aggregation capacity, the modified Fenton treatment could also be considered a pre-treatment of a successive thermal treatment.     

Migratory crustaceans as biomonitors of metal pollution in their nursery areas. The Lesina lagoon (SE Italy) as a case study

Lichens collected in an unpolluted forest (background) in November 2004, transplanted at 41 sampling sites along the Madina-Tetteh Quarshie road, retrieved in February 2005 and analysed were found to contain higher concentrations of Manganese (Mn), Vanadium (V), lead, Cadmium (Cd), Chromium (Cr) and Nickel (Ni) than in the background area. Observations showed that of all the heavy metals studied, Manganese concentrations were highest at all sampling points with maximum values around a traffic light, an intersection and car fitting/mechanic workshops. Significant correlations were found between Ni and Mn, Mn and Cr and Mn and V. Statistical analysis also revealed a relatively even dispersion of the studied elements on the eastern side of the road than on the western side.     

Is the diversity of epiphytic lichens a reliable indicator of air pollution? A case study from Italy

This work provided additional information for a better interpretation of lichen diversity values in biomonitoring studies of air pollution. The effects of 12 predictive variables were estimated for the Genova province (NW Italy) by means of a non-parametric model. The diversity of epiphytic lichens was strictly correlated with mean annual rainfall and mean annual temperature. Different variables were found to affect the lichen diversity in urban vs. forested areas. In urban areas, air pollutants, mainly SO2, are still the main limiting factor, even if under ameliorating conditions this relationship becomes less significant. In forested areas, harvesting and forest fires showed a predominant effect, suggesting the need to develop a more defined sampling protocol to estimate atmospheric pollution in such ecosystems.     

A stochastic Lagrangian micromixing model for the dispersion of reactive scalars in turbulent flows: role of concentration fluctuations and improvements to the conserved scalar theory under non-homogeneous conditions

Several reaction schemes, based on the conserved scalar theory, are implemented within a stochastic Lagrangian micromixing model to simulate the dispersion of reactive scalars in turbulent flows. In particular, the formulation of the reaction-dominated limit (RDL) reaction scheme is here extended to improve the model performance under non-homogeneous conditions (NHRDL scheme). The validation of the stochastic model is obtained by comparison with the available measurements of reactive pollutant concentrations in a grid-generated turbulent flow. This test case describes the dispersion of two atmospheric reactant species (NO and O₃) and their reaction product (NO₂) in an unbounded turbulent flow. Model inter-comparisons are also assessed, by considering the results of state-of-the-art models for pollutant dispersion. The present validation shows that RDL reaction scheme provides a systematic overestimation (relative error of ca. 85% around the centreline) in computing the local reactant consumption/production rate, whereas the NHRDL scheme drastically reduces this gap (relative error lower than 5% around the centreline). In terms of NO₂ production (or reactant consumption), neglecting concentration fluctuations determines overestimations of the product mean of around 100% and a NO₂ local production of one order of magnitude higher than the reference simulation. In terms of standard deviations, the concentration fluctuations of both the passive and reactive scalars are generally of the same order of magnitude or up to 1 or 2 orders of magnitudes higher than the corresponding ensemble mean values, except for the background reactant close to the plume edges. The study highlights the importance of modelling pollutant reactions depending on the instantaneous instead of the mean concentrations of the reactants, thus quantifying the role of the turbulent fluctuations of concentration, in terms of scalar statistics (mean, standard deviation, intensity of fluctuations, skewness and kurtosis of concentration, segregation coefficient, simulated reaction rate). This stochastic particle method represents an efficient numerical technique to solve the convection–diffusion equation for reactive scalars and involves several application fields: micro-scale air quality (urban and street-canyon scales), accidental releases, impact of odours, water quality and fluid flow industrial processes (e.g. combustion).     

Fate of azadirachtin A and related azadirachtoids on tomatoes after greenhouse treatment

The degradation of the main azadirachtoids on tomatoes was studied after greenhouse treatment. These experiments were carried out at 1 and 5× the concentration recommended by the manufacturer. In all experiments the deposition of azadirachtin A (AZA-A) was below the maximum residue level (MRL). Even if at the highest dose, AZA-A half-life time calculated as pseudo first order kinetic was 1.2 days in agreement with the recommended preharvest interval (PHI) of 3 days. Experiments with a model system showed that sunlight photodegradation is the main factor influencing the rate of disappearance of AZA-A after greenhouse treatment while tomato epicuticular waxes doubled the photodegradation rate of AZA-A in a commercial formulation.     

Foliar response of an Ailanthus altissima clone in two sites with different levels of ozone-pollution

Potted plants of Ailanthus altissima, produced by root suckers coming from a single symptomatic mother tree, were placed in two sites in the vicinity of Florence (central Italy), with different levels of ozone pollution. These plants were kept in well watered conditions during the period May-September 1999. In the high pollution site (Settignano-SET) the level of ozone exposure (AOT40) reached at the end of the season a value of 31 ppm h, whereas in the "low pollution" site (Cascine-CAS) the exposure to ozone was 11 ppm h. A. altissima showed foliar symptoms in early July at SET and in the second half of July at CAS when exposure values reached 5 ppm h at both sites. However, at the end of August the conditions of the plantlets were rather similar in both sites. Microscopic and ultrastructural analysis were performed at the first onset of symptoms at SET (the CAS leaflets were asymptomatic). Observing the upper leaf surface where the brown stipples were visible, it was found that the cells of the palisade mesophyll displayed loss of chlorophyll and the organelles in the cytoplasm were damaged. Swelling of thylacoids was observed in the CAS leaflets, thus indicating the possible onset of a pre-visual damage. The injured cells were separated from the healthy ones by a layer of callose. We conclude that the sensitivity to ozone of A. altissima leaves is related to its leaf structure, with low leaf density and large intercellular spaces. Cell walls, as well as acting as mechanical barriers against the spread of ozone within the cell, also provide important detoxifying processes.     

Local Arctic air pollution: Sources and impacts

Local emissions of Arctic air pollutants and their impacts on climate, ecosystems and health are poorly understood. Future increases due to Arctic warming or economic drivers may put additional pressures on the fragile Arctic environment already affected by mid-latitude air pollution. Aircraft data were collected, for the first time, downwind of shipping and petroleum extraction facilities in the European Arctic. Data analysis reveals discrepancies compared to commonly used emission inventories, highlighting missing emissions (e.g. drilling rigs) and the intermittent nature of certain emissions (e.g. flaring, shipping). Present-day shipping/petroleum extraction emissions already appear to be impacting pollutant (ozone, aerosols) levels along the Norwegian coast and are estimated to cool and warm the Arctic climate, respectively. Future increases in shipping may lead to short-term (long-term) warming (cooling) due to reduced sulphur (CO₂) emissions, and be detrimental to regional air quality (ozone). Further quantification of local Arctic emission impacts is needed.     

Canopy profiles of photosynthetic parameters under elevated CO2 and N fertilization in a poplar plantation

A poplar plantation has been exposed to an elevated CO2 concentration for 5 years using the free air CO2 enrichment (FACE) technique. Even after such a long period of exposure, leaves of Populus x euramericana have not shown clear signs of photosynthetic acclimation. Only at the end of the growing season for shade leaves was a decrease of maximum velocity of carboxylation (Vcmax) observed. Maximum electron transport rate (Jmax) was increased by FACE treatment in July. Assimilation rates at CO2 partial pressure of 400 (A400) and 600 (A600) micromol mol(-1) were not significantly different under FACE treatment. Most notably FACE significantly decreased stomatal conductance (g(s)) both on upper and lower canopy leaves. N fertilization increased N content in the leaves on mass basis (Nm) and specific leaf area (SLA) in both CO2 treatments but did not influence the photosynthetic parameters. These data show that in poplar plantations the long-term effects of elevated CO2 on photosynthesis do not differ considerably from the short-term ones even with N deposition.