Bioavailability evaluation of naphthalene in soil using persulfate oxidation and ultrasonic extraction method

Bioavailability is defined as the fraction of a soil contaminant readily available for microbial degradation and for naphthalene it could be estimated by conventional exhaustive extraction methods. In this study, a novel method that employed persulfate oxidation in combination with ultrasonic extraction (POUSE) was developed. Three parameters, temperature, duration of persulfate oxidation, and the ratio of persulfate to soil organic matter (2S,082 /SOM; g g-1), were investigated to obtain an optimum operating conditions. Under the condition, naphthalene bioavailability estimated by the POUSE method was verified and compared with other three exhaustive methods i.e. sonicator, supercritical fluid extraction (SFE), and soxhlet extraction (SE). When the S2,O(8)2-/SOM ratio was controlled at 11.6 g g-1, the optimum operating conditions of the POUSE method were 70 degreesC and 3 hr, for the temperature and duration. Under these conditions, the residual naphthalene concentrations were correlated well with the residual naphthalene concentrations for both the cases of freshly spiked and aged soils. By contrast, the sonicator, SFE, and the SE overestimated the naphthalene bioavailability since these three methods extracted naphthalene much more than that of biodegradation test. These results demonstrated that the POUSE could estimate more precisely the naphthalene bioavailability.     

Origin, separation and identification of environmental nanoparticles: a review

The biogeochemical and ecological impacts of environmental nanoparticles (ENPs) are some of the fastest growing areas of research today. However, efficient separation and collection of ENPs in natural systems remains difficult. This review article is focused on experimental investigation of separation and identification of ENPs, including nanoparticles with size fractions in the range of <2000, 450 to 2000, 100 to 450 and 1 to 100 nm. An automated ultrafiltration device (AUD) was used successfully to overcome the problem of efficiently collecting ENPs in large quantities in red soils. A significant amount of hematite nanoparticles was present on the surface coating of kaolinite nanoparticles and aggregated hematite nanoparticles overlapping the edge of a kaolinite flake in a size range of 5 to 8 nm. Synchrotron XRD technique is more straightforward and powerful than conventional XRD with oriented specimens and random powder methods for identifying nanoparticles, crystallinity, and particle size in red soils, particularly for the illite, kaolinite, goethite and hematite nanoparticles. The AUD apparatus can be employed to efficiently collect large quantities of soil and related ENPs for investigation of their structural characteristics and surface properties, which have significant impact on weathering reaction pathways, catalysis, the fate of vital elements and environmental pollutants, and ecosystem restoration.     

On the random placement hypothesis

A traditional method of summarizing spatial distribution of species is the observed species-area curve. Often the observed species-area curve is surprisingly close to the expected species-area curve under the hypothesis of random placement of individuals. This has been used as evidence supporting the hypothesis. In this paper, we argue that using the observed species-area curve to test the general random placement hypothesis is highly inefficient. We present a testing method based on the classical ² test for over-dispersion which is not only more efficient but also applicable to situations where complete abundance information are unavailable. We also discuss three alternatives of the hypothesis. The focus of this paper is on these and other general issues relevant to communities of different types. No applications are included in this paper.     

Adaptation for accuracy or for precision? Diel emergence timing of the intertidal insect Pontomyia oceana (Chironomidae)

Synchronization of reproduction is obviously under strong selection, but it is not always clear whether the selection is for accuracy of timing, that is, minimal deviation from the environmental optimum, or alternatively, for precision of timing, that is, least extent of spread from the population mean. The former is usually adaptive for exploiting certain environmental conditions, whereas the fitness gain of the latter is usually associated with co-occurrence with conspecifics. We studied the intertidal midge Pontomyia oceana, which has a life cycle of about 30 or 45 days culminating in a highly synchronous swarming of the adult stage that lasts only about 1–2 h. We found that the external proximate factors, controlling their diel swarming, comprise two cues, that is, sunrise and sunset. These two cues, however, are not in existence to improve the accuracy of timing, as their diel swarming times differ widely, with respect to light condition or to tidal condition, in different evenings. Rather, the function is to improve the precision of timing. During the metabolic processes in preparation for emergence, waiting for the cues reduced variation in the population. The extent of dispersion in emergence (swarming) time in an evening is much smaller, when two cues are used compared with the inferred one-cue situations. The short adult life of the marine midges must have rendered mate-finding a stringent selective force despite their apparent high densities. The same principle, that is, using multiple cues to improve precision of timing, may be applicable to many long-lived, free-spawning species, for example, corals, where gametes can fertilize effectively only within a short time after release.     

The influence of soil macroinvertebrates on primary biodegradation of starch-containing polyethylene films

The primary biodegradability of polyethylene (PE) films containing different percentages of cornstarch (0–50%) and other additives (prooxidant, oxidized polyethylene) was tested using four species of earthworms (Eisenia fetida, Lumbricus terrestris, Aporectodea trapezoides, Aporectodea tuberculata), three species of cockroaches (Periplaneta americana, Blaberus sp.,Blattella germanica), termites (Reticulotermes flavipes), sowbugs (Porcellio laevis), and crickets (Acheta domesticus). These studies were conducted to elucidate the potential role of soil macroinvertebrates in degrading starch/PE biodegradable plastics. The results of the macroinvertebrate bioassays indicate that crickets, cockroaches, and sowbugs consumed starch-containing PE films most readily. In addition, the degree to which the films were attacked and consumed was directly related to the starch content of the film. Films with oxidized polyethylene and those containing prooxidant (vegetable oil and a transition metal catalyst) were also consumed. None of the four species of earthworms tested or the termites showed any activity toward the starch/polyethylene films. These results have important implications for determining the fate of novel plastic formulations which claim to be biodegradable in natural environments. Studies such as these, coupled with studies on microbial degradation, will help provide the type of information needed to assess the environmental fate of biodegradable starch/PE plastics and fill the voids in the scientific database regarding this rapidly developing field.     

PAH emission from the incineration of three plastic wastes

A batch-type, controlled-air incinerator was used for the treatment of polyvinyl chloride (PVC), high-density polyethylene (HDPE), and polypropylene (PP) plastic wastes. The concentration and composition of 21 individual polycyclic aromatic hydrocarbons (PAHs) in the raw wastes, flue gas (gas and particle phases), and ash were determined. Stack flue-gas samples were collected by a PAH stack-sampling system. Twenty-one individual PAHs were analyzed primarily by a gas chromatograph/mass spectrometer (GC/MS). The CO concentration correlated well with the total PAH (R2 > .89), and thus can be used as a surrogate indicator for PAH emission. Excess amounts of air supply in the incineration of plastic wastes could decrease not only the concentration of the PAHs in the bottom ash but also the emission factor (EF) of the total PAH in the stack flue gas. Of the three plastic wastes, HDPE was found to have the highest mean EF of the total PAHs (462.3 mg/kg waste) from the stack flue gas. Incinerating PVC would result in a higher EF of PAHs (195.4 mg/kg waste) in the bottom ash. When PVC plastic wastes were incinerated, higher-ringed PAHs constituted a larger percentage in the bottom ash as compared to those from PP and HDPE plastics. By judging the output and input (O/I) ratio of the PAHs from the incineration trials of plastic wastes, the PAHs involved in incineration of three plastic wastes were almost entirely destroyed; and a low residual amount between 0.00018 and 0.00032 remained in the emission.     

Some selected heavy metal concentrations in water,sediment, and oysters in the Er-Ren estuary,Taiwan: chemical fractions and the implications for biomonitoring

Studies of heavy metal contamination and ecological risk in estuaries are an important emerging area of environmental science. However, there have been few detailed studies of heavy metal contamination that concern the spatial variation of heavy metal levels in water, sediment, and oyster tissue. Because of the effective uptake of heavy metals, cultured oysters are a cheap and effective subject for study. This study, conducts an experiment in the Er-Ren river to examine the biological uptake of heavy metals in farmed, cultured oysters. The distribution of copper, zinc, lead, cadmium, and arsenic concentrations in water, sediment, and oysters from the Er-Ren river is also evaluated. By sequential extraction of the sediments, the following order of mobilities is found for heavy metals Pb?>?Cd?>?As?>?Zn?>?Cu. The highest percentages of heavy metals are found in the residual phase. The mean uptake rates for young oysters are 7.24 mg kg^?1 day^?1 for Cu and 94.52 mg kg^?1 day^?1 for Zn, but that for adult oyster is 10.79 mg kg^?1 day^?1 for Cu and 137.24 mg kg^?1 day^?1 for Zn. With good policies and management, the establishment of cultured oyster frames in these contaminated tributaries and near shore environments is a potential method for removing Cu and Zn and protecting the coast.     

Particulate collection in a high temperature cyclone

A new particle collection technique is analyzed and presented for its potential application in a high temperature, high pressure gas cleaning system. The technique is based on the collision and the aglomeration phenomena among the coal-ash particles when the cyclone is operated near the coal-ash fusion temperature. The percent increase of agglomeration rate is estimated by mathematical modeling for particles smaller than five microns in diameter. Particulate collection efficiency with or without agglomeration is presented. Experimental results in a high temperature cyclone are presented. The output dust loading varied from 0.025 to 5 grains per cubic foot (0.057–11 g/m³) as the input dust loading is increased from 4 to 35 grains per cubic foot (9.2–80g/m³) of gas flow.