西澳大利亚布罗克曼火山岩型稀有金属矿床──奈厄比厄姆凝灰岩的矿物学和地球化学

西澳大利亚布罗克曼稀有金属矿化，是富含挥发份和不相容元素（例如Zr、IJf、Nb、Ta、Be、Y和REE及Ga等）的粗面岩岩浆发生早期火山碎屑喷发的结果。矿化呈三。粒状（＜20μm），是由于相对简单的岩浆前身矿物（如铌铁矿和钻石），在岩浆喷发后保存于灰流凝灰岩［奈厄比厄姆（Niobium）凝灰岩］中的岩浆期后富F溶液的作用下，发生蚀变和再活化的结果。球粒陨石标准化的REE分布模式显示，矿体强烈富集HREE。胶质锆石是HREE主要载体，浸染状氟碳铈矿（±氟碳钙铈矿和直氟碳钙铈矿）是LREE的载体，晚期方解石脉中的羟硅滚石是Be的载体。Ga赋存于基质K云母中。上覆于奈厄比厄姆凝灰岩的粗面岩流含有许多类似的矿石矿物，但含量略有不同。     

Sustainable Development and Strategic Thinking

From an economic point of view, the industrial economy is efficient to overcome situations of a scarcity of goods. From a technological point of view, the resource efficiency of the manufacturing processes of the industrial economy has been permanently improved during the last 200 years. In addition, cleaner processes have been developed. However, from an ecologic point of view, an increasing world population with increasing consumption has produced a ＂global footprint＂ which approaches the carrying capacity of the planet. A circular economy and its high-value spin-offs-a lake economy and a performance or functional service economy-can fulfil customers＇ needs with considerably less resource consumption, less environmental impairment in production and considerably less end-of-life product waste, especially in situations of affluence, when a considerable stock of physical goods and infrastructures exists. Also, in situations of a scarcity of natural resources, both energy and materials, often characterised by rapidly rising resource prices, the economic actors of a circular economy have a high competitive advantage over the actors of the industrial economy, due to much lower procurement costs for materials and energy. From a social point of view, a circular economy increases the number of skilled jobs in regional enterprises. However, the shift from a linear manufacturing economy to a circular or service economy means a change in economic thinking from flow （throughput） management to stock （asset） management： in a manufacturing economy with largely unsaturated markets, total wealth increases through accumulation as resource throughput （flow） is transformed into a higher stock of goods of better quality （but in a manufacturing economy with largely saturated markets, wealth represented by the stock of goods will no longer increase）; in a circular or service economy, total wealth increases through a smart management of existing physical assets （stock） that are adapted to changes in both technology and customer demand. This second approach not only applies to physical capital but equally to social capital, such as health and education and green GDP. To measure the social wealth of a population, it is not the amount of money spent on schools and hospitals that matters, butif this expenditure has led to a better education of the students, and a better health of the people.     

Treatability studies of naphthalene in soil,water and air with persulfate activated by iron(Ⅱ)

Chemical oxidation was applied to an artificially contaminated soil with naphthalene (NAP). Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. The importance of the air phase analysis was emphasized by demonstrating how NAP behaves in a sealed system over a 4 hr reaction period. Design of Experiments method was applied to the following variables: sodium persulfate concentration [SP], ferrous sulfate concentration [FeSO₄], and pH. The system operated with a prefixed solid to liquid ratio of 1:2. The following conditions resulted in optimum NAP removal [SP] = 18.37 g/L, [FeSO₄] = 4.25 g/L and pH = 3.00. At the end of the 4 hr reaction, 62% of NAP was degraded. In the soil phase, the chemical oxidation reduced the NAP concentration thus achieving levels which comply with Brazilian and USA environmental legislations. Besides the NAP partitioning view, the monitoring of each phase allowed the variabilities assessment over the process, refining the knowledge of mass reduction. Based on NAP distribution in the system, this study demonstrates the importance of evaluating the presence of semi-volatile and volatile organic compounds in the air phase during remediation, so that there is greater control of the system as to the distribution and presence of the contaminant in the environment. The results highlight the importance of treating the contaminant in all its phases at the contaminated site.     

Characterization of atmospheric aerosol (PM10 and PM2.5) from a medium sized city in São Paulo state, Brazil

Air pollution causes deleterious effects on human health with aerosols being among the most polluting agents.The objective of this work is the characterization of the PM_(2.5) and PM_(10) aerosol mass in the atmosphere.The methods of analysis include WD-XRF and EDS.Data were correlated with meteorological information and air mass trajectories(model HYSPLIT)by multivariate analysis.A morphological structural analysis was also carried out to identify the probable sources of atmospheric aerosols in the city of Sao Jose do Rio Preto,Brazil.The mean mass concentration values obtained were 24.54 μg/m~3 for PM_(10),above the WHO annual standard value of 20 μg/m~3 and 10.88 μg/m~3 for PM_(2.5) whose WHO recommended limit is10 μg/m~3.WD-XRF analysis of the samples revealed Si and Al as major components of the coarse fraction.In the fine fraction,the major elements were Al and S.The SEM-FEG characterization allowed identifying the morphology of the particles in agglomerates,ellipsoids and filaments in the PM_(10),besides spherical in the PM_(2.5).The analysis by EDS corroborated WD-XRF results,identifying the crustal elements,aluminosilicates and elements of anthropogenic origin in the coarse fraction.For the fine fraction crustal elements were also identified;aluminosilicates,black carbon and spherical particles(C and O) originating from combustion processes were predominant.The use of multivariate analysis to correlate air mass trajectories with the results of the morpho-structural characterization of the particulate matter allowed confirmation of the complex composition of the particles resulting from the combination of both local and long-distance sources.     

Shelter, housing and recovery: a comparison of u.s. Disasters

In this paper we examine the issues associated with the temporary sheltering and housing of victims after natural disasters in the United States. Specific topics addressed include differential access to shelter and housing aid according to social class, ethnicity and related demographic factors; the relationship between post-disaster shelter and housing and long-term recovery; the role of social support networks in the sheltering of victims; and the implications of the research for the provision of shelter and housing aid after disasters.     

The influence of pH on cadmium toxicity to the green alga Stichococcus bacillaris and on the cadmium forms present in the culture medium

Cadmium toxicity to the green alga Stichococcus bacillaris was investigated in media of pH 3-9. A significant decrease of cadmium toxicity occurred in both the acidic and alkaline ranges of pH. In media of pH 3 and 9, cadmium did not affect the dry mass content substantially. Maximum toxicity of cadmium was noticed at pH 6-7. Voltametric investigations showed a significant effect of pH on electrochemically measured cadmium content in the culture media. Hydrolysis of the medium components and formation of cadmium complexes with OH(-) ions caused a considerable decrease in amounts of electrochemically measured cadmium in the alkaline range of pH.     

Recycling of petroleum-contaminated sand

The environmental impact of using petroleum-contaminated sand (PCS) as a substitute in asphalt paving mixtures was examined. An appreciable component of PCS is oily sludge, which is found as the dregs in oil storage tanks and is also produced as a result of oil spills on clean sand. The current method for the disposal of oily sludge is land farming. However, this method has not been successful as an oil content of < 1% w/w is required, and difficulty was encountered in reaching this target. The reuse of the sludge in asphalt paving mixtures was therefore considered as an alternative. Standard tests and environmental studies were conducted to establish the integrity of the materials containing the recycled sludge. These included physical and chemical characterization of the sludge itself, and an assessment of the mechanical properties of materials containing 0%, 5%, 22% and 50% oily sludge. The blended mixtures were subjected to special tests, such as Marshall testing and the determination of stability and flow properties. The experimental results indicated that mixtures containing up to 22% oily sludge could meet the necessary criteria for a specific asphalt concrete wearing course or bituminous base course. To maximize the assay from the recycled material, the environmental assessment was restricted to the 50% oily sludge mixture. Leachates associated with this particular mixture were assayed for total organic residue and certain hazardous metal contaminants. The results revealed that the organics were negligible, and the concentrations of the metals were not significant. Thus, no adverse environmental impact should be anticipated from the use of the recycled product. Our research showed that the disposal of oily sludge in asphalt paving mixtures could possibly yield considerable savings per tonne of asphalt concrete, and concurrently minimize any direct impact on the environment.     

The effect of filter material on bioaerosol collection of Bacillus subtilis spores used as a Bacillus anthracis simulant

The objective of this study was to determine filter materials and extraction methods that are appropriate to use for environmental sampling of B. anthracis. Four types of filters were tested: mixed cellulose ester (MCE) with a pore size of 3 microm, polytetrafluoroethylene (PTFE) with pore sizes of 1 and 3 microm, and gelatin with a pore size of 3 microm. Bacillus subtilis var. niger endospores (also known as Bacillus globigii[BG]) were used as a surrogate for B. anthracis. Endospores were collected into Button Inhalable Aerosol Samplers with sampling times of 15 minutes, 1 hour, and 4 hours. Physical collection efficiency was determined by measuring upstream and downstream B. subtilis concentrations with an optical particle counter. Vortexing with ultrasonic agitation and vortexing with shaker agitation extraction methods were evaluated. The MCE, 1 microm PTFE, and gelatin filters provided physical collection efficiencies of 94% or greater. The 3 microm PTFE filter showed inconsistent physical efficiency characteristics between filters. Epifluorescence microscopic analysis of the gelatin filter extraction fluid revealed the presence of contamination by non-culturable bacteria. Mean differences for microbial culturability were not statistically significant for filter materials and extraction methods. However, the vortexing with shaker agitation extraction method resulted in higher total microbial counts in the extraction fluids for MCE and 1 microm PTFE filters when compared to vortexing with ultrasonic agitation. In summary, the MCE and 1 microm PTFE filters in combination with vortexing and shaker extraction demonstrated the best performance for the filter collection and extraction of BG spores.     

Diffusive sampling of methyl isocyanate using 4-nitro-7-piperazinobenzo-2-oxa-1,3-diazole (NBDPZ) as derivatizing agent

A diffusive sampling method for the determination of methyl isocyanate (MIC) in air is introduced. MIC is collected using a glass fiber filter impregnated with 4-nitro-7-piperazinobenzo-2-oxa-1,3-diazole (NBDPZ). The urea derivative formed is desorbed from the filter with acetonitrile and analyzed by means of high-performance liquid chromatography (HPLC) using fluorescence detection (FLD) with lambdaex = 471 nm and lambdaex = 540 nm. Additionally, a method was developed using tandem mass spectrometric (MS-MS) detection, which was performed as selected reaction monitoring (SRM) on the transition [MIC-NBDPZ + H]+ (m/z 307) to [NBDPZ + H]+ (m/z 250). The diffusive sampler was tested with MIC concentrations between 1 and 35 microg m(-3). The sampling periods varied from 15 min to 8 h, and the relative humidity (RH) was set from 20% up to 80%. The sampling rate for all 15 min experiments was determined to be 15.0 mL min(-1) (using HPLC-FLD) with a relative standard deviation of 9.9% for 56 experiments. At 80% RH, only 15 min sampling gave acceptable results. Further experiments revealed that humidity did not affect the MIC derivative but the reagent on the filter prior to and during sampling. The sampling rate for all experiments (including long term sampling) performed at 20% RH was found to be 15.0 mL min(-1) with a relative standard deviation of 6.3% (N = 42). The limit of quantification was 3 microg m(-3) (LC-MS-MS: 1.3 microg m(-3)) for 15 min sampling periods and 0.2 microg m(-3) (LC-MS-MS: 0.15 microg m(-3)) for 8 h sampling runs applying fluorescence detection.     

The distribution of molybdenum in the tissues of wild ducks

The Mo contents and the relations between Mo and Cu or Crcontents were investigated in the organs of Japanese wild ducks(spotbill duck, pintail, wigeon, scaup and tufted duck). Thehighest Mo content in kidney and liver of the dabbling duckswere more than 30 g g^-1 dry weight (g g^-1 d.wt.), though that of diving ducks were less than 11 gg^-1 d. wt. The contents were lower in the ducks migratingwithin Japan, Eurasia and North America than those in the birdsmigrating between Japan and Eurasia. The contents of liver inall species were more than 50 and less than 5 g g^-1 d.wt. for Cu and Cr, respectively. Significant correlations werefound between Mo and both elements in pintail and scaup, and Moand Cr in tufted duck. These results suggest that thecontamination of wild ducks reflects the reproductive area, andnot the collected area. Mo contents closely correlated with theCu and/or Cr contaminations.