Initial design process of the sustainability science ontology for knowledge-sharing to support co-deliberation

Implementation of the sustainability science (SS) approach is often difficult because of poor communication between experts from different academic fields. We focused on ontology engineering as a method of knowledge structuring that supports the co-deliberation process. However, SS is too broad for a few experts to construct an ontology because SS targets and covers almost all existing research fields from the viewpoint of problem-solving. The N-iteration process is required for completing an SS ontology. In the present paper, we discuss the initial design process for constructing an ontology on SS from the aspect of a knowledge-sharing tool to support co-deliberation. First, we identified the SS ontology by referring to the existing literature. Second, we traced the structuring process of the SS ontology, which is independent of the existing research domain. Third, we compared the SS ontology with existing ontologies or concept structures on SS. Fourth, we assessed the SS ontology produced in the initial process in terms of relevance and coverage and addressed areas for improvement in order to facilitate co-deliberation among researchers from different domains. As a result of developing the SS ontology and applying it to the mapping tool that we developed based on the ontology, we found the following three points: the SS ontology enables us to define concepts relevant to SS without overlapping by distinguishing part-of and attribute-of relationships at the upper level of the ontology; the SS-based mapping tool successfully represents the potential countermeasures required by the targeted problem for all scientific fields except experimental engineering; however, the SS ontology requires further improvement in order to represent the conceptual linkage arising from compound and secondary problems and the fulfillment of classes at the lower hierarchy of Shortage problem, and requires slots for the entire hierarchy. In addition, based on the discussion of the areas for improvement, we found that missing slots and classes should be added in the process in which we use or improve tools corresponding to a variety of requirements for supporting co-deliberation. In this way, we are able to propose an incremental process for constructing the SS ontology from the aspect of a knowledge-sharing tool to support co-deliberation.     

A laboratory study on migration of K+ in a two-layer landfill liner system.

Contaminant transport through the clay liner and the underIying secondary leachate drain layer (SLDL) in landfills was studied through a laboratory test, and analysis method on the transport of K+ in a two-layer soil system. The soils used for this study were Ariake clay and the underlying layer, Shirasu soil from the Kyushu region of Japan, representing the clay liner material and SLDL material, respectively. The effective diffusion coefficients (De) of the selected target chemical species, potassium (K+) for the Ariake clay and Shirasu soil were back-calculated using a computer program, and it was found that values of De derived from this study were consistent with those previously published. The hypothesis that the mechanical dispersion process can be negligible has been proved to be reasonable based on both the observation that the predicted values fit the experimental data and the analyses of two dimensionless parameters. Parametric analysis showed the transport of K+ through the soils is controlled by advection-diffusion rather than diffusion only, whereas at low Darcy velocity (i.e. < or = 10(-9) m s(-1)), transport of K+ would be controlled by diffusion. The test results and parametric analysis may be applied in design of landfill liners and SLDLs, particularly in coastal areas.     

Leaching characteristics of bisphenol A from epoxy-resin pavement materials

We investigated the leaching characteristics of bisphenol A (BPA) from two kinds of epoxy-resin pavement materials, one containing epoxy resins (EPs) and the other containing epoxy-acrylate resins (EPAs). Both samples contained residual BPA monomer, at levels of 9.0?µg?g^?1 for the EP resin sample and 4.4?µg?g^?1 for the EPA resin sample. These amounts were larger than amounts previously measured for polycarbonate samples. The amount of BPA leached from the samples increased with temperature. The leaching of BPA from EP was more strongly affected by temperature than the leaching from EPA. The pH also affected the amount of leached BPA. The maximum leached amount was observed under alkaline conditions (pH 10.8) for both sample types. The amounts of BPA that might leach from pavement materials during 1?h of heavy rain were estimated to be 0.9?µg?m^?2 for EP and 3.5?µg?m^?2 for EPA. Our results indicate that EPs disposed of in waste landfills without any treatment may be a source of BPA in leachate at landfill sites.     

Toward knowledge structuring of sustainability science based on ontology engineering

In sustainability science (SS), it is difficult to identify what needs to be solved, and it is also not clear how to solve the problems that are identified. There has been no consensus on the underlying question of “What is structuring knowledge in SS?” This paper focuses on knowledge structuring accompanied by supporting of thinking. It addresses the key challenges associated with knowledge structuring in SS, identifies the requirements for the structuring of knowledge, proposes a reference model, and develops an ontology-based mapping tool as a solution to one layer of the reference model. First, we identify the important requirements for SS knowledge structuring. Second, we develop a reference model composed of five layers based on three of the requirements. Third, we develop an ontology-based mapping tool at Layer 2 of the reference model for meeting the two major challenges for SS, namely, identifying what problems should be addressed in SS itself and proposing solutions for those problems. The tool is designed to store and retrieve information regarding SS, to provide access to a prototype ontology for SS, and to create multiple maps of conceptual chains depending on a user’s interests and perspectives. Finally, we assess whether the developed tool successfully realizes the targeted part of the reference model for SS by examining the tool’s conformity to the reference model, as well as its usability, effectiveness, and constraints. Although several issues were identified in the prototype ontology and the mapping tool, the study concluded that the mapping tool is useful enough to facilitate the function of Layer 2. In particular, the mapping tool can support thinking about SS from the viewpoint of: (a) finding new potentials and risks of technological countermeasures studied in SS; (b) helping users to get a more comprehensive picture of problems and their potential solutions; and (c) providing an effective opportunity to come up with new ideas that might not be thought of without such a tool.     

Reality and risk of contact-type head injuries related to bicycle-mounted child seats

Objective

The authors have treated numerous children who have been injured by falling from bicycle-mounted child seats. Despite the greatly increased use of such seats, the understanding of their risk and the importance of helmet use remains alarmingly poor. The objective of this study was to confirm the risk of bicycle-mounted child seats and to evaluate the efficacy of helmets, seat belts, and back seat height in terms of preventing or mitigating contact-type head impacts that occur in falls from bicycle-mounted child seats.

Materials and methods

Biometrical dummy tests were performed to examine contact-type head injuries in falls from stationary bicycles. A bicycle with an anthropometric test dummy placed in a bicycle-mounted child seat was tipped over. Each test was repeated three times and three-dimensional acceleration was measured using accelerometer. Head Injury Criteria (HIC) were calculated and the respective influences of a helmet, a seat belt, and increased height of the back of the seat on such impacts were evaluated.

Results

Only helmets unequivocally lowered maximal acceleration and/or HIC values with statistical significance. The seat belt lowered HIC values as long as it was used with the high-back seat. Only when the dummy wore a helmet sitting in a high-back seat did the HIC show less than the threshold of 570 for three-year-old children. The HIC showed the lowest score of 161.5 when the dummy wore both a helmet and a seat belt sitting in a high-back seat.

Conclusions

Riders in bicycle-mounted child seats definitely have higher risks of contact-type head injuries. In transporting a child on a bicycle-mounted child seat, parents must use both a child-bicycle helmet and a high-back child seat at least; a seat belt is highly recommended as long as it is used with the other safety devices.

Impact on Industry

The bicycle-mounted child seat should have a high enough back and an appropriate seat belt to protect the head of the child from a contact-type injury.     

Exoenzymes of Trametes versicolor can metabolize coplanar PCB congeners and hydroxy PCB

Two fractions containing the oxidase activity toward 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonate) (ABTS) were obtained using ion-exchange DEAE-Sepharose column chromatography of the culture fluid of white-rot fungus, Trametes versicolor. These two fractions can reduce the level of coplanar PCB congeners (Co-PCBs). The ABTS oxidase in the first fraction passed through the DEAE-Sepharose column. The ABTS oxidase in the second fraction was adsorbed to the column at 相似文献   

Production and characterization of KOH-activated carbon derived from polychlorinated biphenyl residue generated by the sodium dispersion process

Polychlorinated biphenyl (PCB) residues from the sodium dispersion (SD) process were employed as the raw materials for the production of activated carbon using KOH activation. The pore properties, such as the specific surface area and pore size distribution, were characterized using the Barrett–Joyner–Halenda method and the Horvath–Kawazoe method based on the N₂ adsorption isotherm at 77 K. The activated carbon produced showed similar adsorption capacities and specific surface areas to the commercially available product. The effects of the activation conditions on the porosity of the activated carbon produced were studied. The most significant factor affecting the specific surface proved to be the activation temperature. The activated carbon produced from PCB residues from the high-temperature (423–443 K) SD process had a binary pore size distribution well developed in the 4 nm region and in the micropore region. The pore structure of the carbon produced from PCB residues from the low-temperature (333–393 K) SD process had a wide range of micropores and mesopores.