Ionic imbalance due to hydrogen carbonate from Asian dust

In an attempt to identify the ionic imbalance, hydrogen carbonate, HCO₃⁻ (bicarbonate), was determined together with the commonly determined nine major ions because the imbalance was frequently encountered in the chemical analysis of samples with high pHs. Titration method was applied for the determination of the samples with pH higher than 5.6. These samples amounted to 102 of the 1536 samples collected in Hokkaido, Northern Japan, from April 1998 to December 2002. Of the 102 samples, 74 (Group A) showed an acceptable ion balance without including HCO₃⁻. In the other 28 (Group B), however, inclusion of HCO₃⁻ successfully improved the ion balance. These results suggested that hydrogen carbonate was a potential candidate for explaining the imbalance. The hydrogen carbonate concentrations showed a strong correlation with the corresponding non-sea salt calcium (nss-Ca²⁺) concentrations, which implied that hydrogen carbonate was derived from calcium carbonate particles incorporated into falling raindrops or cloud droplets. For Group A, the relationship between hydrogen carbonate and the nss-calcium ion concentration was very similar to that for commonly suspended particles in Hokkaido. On the other hand, Group B exhibited a stronger but significantly different correlation. To the samples of Group B, a back-trajectory analysis was applied to demonstrate that the samples were associated with aerosol travelling from Northern China or Mongolia, which indicated that alkaline aerosol affected the chemistry. In consideration of these findings, the current standard of the ion balance should be critically reviewed for modification in regard to the contribution of hydrogen carbonate not only in source areas but also in receptor areas of alkaline aerosol.     

Volcano-related materials in concretes: a comprehensive review

Massive volcano-related materials (VRMs) erupted from volcanoes bring the impacts to natural environment and humanity health worldwide, which include generally volcanic ash (VA), volcanic pumice (VP), volcanic tuff (VT), etc. Considering the pozzolanic activities and mechanical characters of these materials, civil engineers propose to use them in low carbon/cement and environment-friendly concrete industries as supplementary cementitious materials (SCMs) or artificial/natural aggregates. The utilization of VRMs in concretes has attracted increasing and pressing attentions from research community. Through a literature review, this paper presents comprehensively the properties of VRMs and VRM concretes (VRMCs), including the physical and chemical properties of raw VRMs and VRMCs, and the fresh, microstructural and mechanical properties of VRMCs. Besides, considering environmental impacts and the development of long-term properties, the durability and stability properties of VRMCs also are summarized in this paper. The former focuses on the resistance properties of VRMCs when subjected to aggressive environmental impacts such as chloride, sulfate, seawater, and freezing–thawing. The latter mainly includes the fatigue, creep, heat-insulating, and expansion properties of VRMCs. This study will be helpful to promote the sustainability in concrete industries, protect natural environment, and reduce the impacts of volcano disaster. Based on this review, some main conclusions are discussed and important recommendations regarding future research on the application of VRMs in concrete industries are provided.     

Selection of palm oil mill effluent treatment for biogas generation or compost production using an analytic hierarchy process

Palm oil mill effluent (POME) is the liquid waste from palm oil mills, and is generally treated using open lagoon technology. However, open lagoons can also be combined with more environmentally friendly technologies. In this study, the analytic hierarchy process (AHP) was used to determine the best combination open lagoon of technology (COLT) for POME treatment. The selected criteria were benefit, opportunity, risk, and cost, with sub-criteria further determined based on these criteria. The sub-criteria were revenue, greenhouse gas reduction, employment absorption, corporate social responsibility, co-processing, environmental risk, marketing risk, technology reliability, investment cost, operation and maintenance cost, and opportunity cost. The alternatives were COLT-composting for fertilizer purpose and COLT-biogas for energy generation purpose. Calculation and analysis was performed on questionnaire data using Expert Choice^®. COLT-composting proved to be the superior COLT using tentative performance of alternative in this research, with advantages in benefit, opportunity, and risk. The priority weight for COLT-composting was 0.636. Sensitivity analysis was performed by changing criteria priorities. For COLT-biogas to be considered better than COLT-composting, the cost would need to be weighted more than 0.954.     

Spatial differences of chemical features of atmospheric deposition between rainy season and winter in the areas facing to the Japan Sea, Japan

Atmospheric deposition was collected using filtrating bulk samplers at 32 sites in the areas facing to the Japan Sea (AFJS) from April 1991 to March 1994. The data were analyzed for winter (January and February) and the rainy season (June and July) when the climate is just the opposite. The AFJS was geographically divided into five areas, that is western Tohoku (WT), Hokuriku (HR), eastern San-in (ES), western San-in (WS) and northern Kyushu (NK). WT, HR and ES receive more precipitation than other regions in winter. H+ depositions increase in winter except NK. This is mainly due to high winter H+ concentrations. In spite of large amounts of precipitation in WT, HR and ES in winter, nss-SO4(2-) concentration was nearly equal to the average throughout Japan. Namely, nss-SO4(2-) depositions in these areas were nearly twice the national mean. In WT, HR and ES, nss-Ca2+ concentrations in winter are lower than the average of the whole country (less than the half). This may be the cause of the lower potentials of neutralization and the higher remaining acid concentrations in WT, HR and ES than NK and WS.     

Re-emission of heavy water vapour from soil to the atmosphere

The re-emission process of tritiated water (HTO) deposited on a soil surface is an important process to assess tritium doses to the general public around nuclear fusion facilities in future. A field experiment using heavy water (HDO) as a substitute for HTO was carried out in the summertime to investigate the re-emission process of HTO from soil to the atmosphere. In the experiment, the time variations of depth profiles of HDO concentrations in soil exposed to HDO vapour and soil mixed with HDO were measured during the re-emission process on the field. The HDO concentrations in soil water in top soil layers of both the exposed and mixed soil rapidly decreased with time during the re-emission. However, the decrease of exposed soil was much greater than that of mixed soil. The re-emission process was analysed using a model including the evaporation of HDO from soil, the exchange between soil HDO and air H2O, and the diffusion of HDO in soil. It was found that the model is applicable to calculating the time variations of detailed depth profiles of HDO concentration in soil water in surface soil layers, using an estimated exchange velocity.     

Application of an ELISA for PCB 118 to the screening of dioxin-like PCBs in retail fish

A commercially available enzyme-linked immunosorbent assay (ELISA) kit was evaluated for the determination of toxic equivalents (TEQs) of dioxin-like polychlorinated biphenyls (PCBs) in retail fish. The ELISA was highly specific for 2,3',4,4',5-pentachlorobiphenyl (PCB 118), which is generally the most abundant dioxin-like PCB isomer found in fish. The quantitative limit of the ELISA (using 3,3',4'-trichloro-4-methoxybiphenyl as a surrogate standard for PCB 118) was 10 ng ml(-1) (125 pg assay(-1)) in the standard curve, corresponding to 50 pg PCB 118 g(-1) in the tested sample. Good recoveries of PCB 118 (78.7-112.3%) were obtained for spiked purified fish extracts according to the ELISA. Good linearity was also obtained in dilution tests using purified fish extracts. No significant interference of the matrix was observed in the ELISA when this purification procedure was used. Recovery tests in which PCB 118 was added to fish samples also resulted in acceptable recoveries (60.2-82.3%) in the ELISA following purification. The ELISA results for fish samples correlated well with the TEQ concentrations of dioxin-like PCBs obtained by high-resolution gas chromatography/high-resolution mass spectrometry (r = 0.92, n = 26). These data indicate that the ELISA kit is suitable for screening retail fish for the TEQs of dioxin-like PCBs.     

Factors influencing the sustained participation of farmers in participatory forestry: a case study in central Sal forests in Bangladesh

Wide acceptance of sustainable development as a concept and as the goal of forest management has shifted forest management policies from a traditional to a people-oriented approach. Consequently, with its multiple new objectives, forest management has become more complex and an information gap exits between what is known and what is utilized, which hinders the sustained participation of farmers. This gap arose mainly due to an interrupted flow of information. With participatory forestry, the information flow requires a broad approach that goes beyond the forest ecosystem and includes the different stakeholders. Thus in participatory forest management strategies, policymakers, planners and project designers need to incorporate all relevant information within the context of the dynamic interaction between stakeholders and the forest environment. They should understand the impact of factors such as management policies, economics and conflicts on the sustained participation of farmers. This study aimed to use primary cross-sectional data to identify the factors that might influence the sustained participation of farmers in participatory forestry. Using stratified random sampling, 581 participants were selected to take part in this study, and data were collected through a structured questionnaire by interviewing the selected participants. To identify the dominant factors necessary for the sustained participation of farmers, logistic regression analyses were performed. The following results were observed: (a) sustained participation is positively and significantly correlated with (i) satisfaction of the participants with the tree species planted on their plots; (ii) confidence of the participants that their aspired benefits will be received; (iii) provision of training on different aspects of participatory forestry; (iv) contribution of participants' money to Tree Farming Funds. (b) The sustained participation of farmers is negatively and significantly correlated with the disruption of local peoples' interests through implementation of participatory forestry programs, and long delays in the harvesting of trees after completion of the contractual agreement period.     

Potential of microalgae Bio-Coke as a sustainable solid fuel alternative to coal coke

Energy and environmental issues have triggered the search for new sources of green energy alternatives in recent years. Biofuel production from renewable sources is widely considered one of the most sustainable alternatives for environmental and economic sustainability. Microalgae are currently being promoted as one of the most promising liquid biofuel feedstocks due to their rapid growth, high lipid production capacity, and carbon–neutral cycle. In this study, whole microalgae cells were utilized as raw material to produce solid biofuel, i.e., Bio-Coke, and this study aimed to investigate the possibility of microalgae Bio-Coke as an alternative to coal coke. The results show that Bio-Coke can be produced from microalgae in the temperature range of 80–100 °C. The apparent density is between 1.253 and 1.261 g/cm³, comparable to the apparent density of lignocellulosic Bio-Coke. Additionally, the calorific value is higher than the calorific value of lignocellulosic Bio-Coke and within the range of the calorific value of subbituminous coal. Therefore, microalgae Bio-Coke can be utilized to replace coal coke usage in the future.

     

Molecular size as a limiting characteristic for bioconcentration in fish

The relationships between the bioconcentration factor (BCF) of chemicals in fish and their size, as characterized by molecular weight (MW), effective cross sectional diameter (Deff), and maximum diameter (Dmax) have been investigated using an experimental data set of 737 new and 441 existing chemicals monitored by the Japanese Chemical Substances Control Law (CSCL). Substances with BCF > or = 5000 (very high bioconcentration potential) typically have MW < 550, Deff < 1.1 nm and Dmax < 2.0 nm, respectively and the substances with BCF > or = 1000 (high bioconcentration potential) have MW < 550, Deff < 1.4 nm and Dmax < 2.9 nm, respectively Therefore, the previously suggested threshold values for Deff (0.95 nm) and Dmax (1.5 nm) used for discriminating between bioconcentrative and non-bioconcentrative substances were found to be somewhat small. We found that many substances with BCF > or = 1000 and Dmax > or = 1.5 nm have Deff < 0.95 nm.     

Distribution of tetrodotoxin in various organs of the starfish Astropecten polyacanthus

Tissues of various organs of the starfish Astropecten polyacanthus collected in the Hiroshima Prefecture from April 1985 to June 1986 were analyzed for lethal potency by the assay method for tetrodotoxin. The ovary showed the highest potency (47 to 1 450 MU g^-1), followed by the digestive organs (<10 to 960 MU g^-1) and the exoskeleton including spines and tube-feet (<10 to 170 MU g^-1). The pyloric caecum and testis were less toxic. Overall toxicity was remarkably higher in females (2 060±382 MU, mean±SE) than in males (1 106±214 MU).