Comparative evaluation of sizing of metal hydride (MH) hydrogen storage tank filled with different alloys

This study presents a comparative analysis of sizing of metal hydride tank filled with different alloys. Alloys include solid solutions and intermetallic compounds of the generic families AB₅, AB₂, AB, A₂B. The effects of the different alloys on the sizing of metal hydride hydrogen storage tanks are complicated and depend on many factors. In this paper, a thermoeconomic optimization analysis with a simple algebraic formula was presented for the estimation of optimum metal hydride tank surface area for heat transfer enhancement. The optimum area of the metal hydride tank filled with commercially available different alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) was evaluated and compared by the developed method. The optimum net savings and the value of payback were determined for four alloys. It is found that mathematical model can be employed for the determination of optimum metal hydride tank design and increasing net savings according to alloy types. The optimum areas of the tanks filled with four alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) were calculated as 0.136, 0.130, 0.133, and 0.173 m², respectively. The optimum net savings for tanks filled with four alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) are about 461.0, 409.3, 419.6, and 979.6 $ and the values of payback are about 1.98, 2.1, 2.17, and 1.37 years, respectively. Excessive area of the metal hydride tank would not be as economical as the optimum tank area. Thermal management of metal hydride tank must be designed for optimum points calculated at which maximum savings occur.     

Evaluation of a fast wastewater odour characterisation procedure using a chemical sensor array

Sewage treatment works are one of the major sources that cause atmospheric odour pollution. The increase in the number of complaints about odour nuisance is due to the increase in environmental concerns. Unfortunately, the legislation on odour nuisance from sewage treatment works is very limited. In order to determine suitable thresholds on which to base legal standards, reliable and efficient odour measurement methods need to be defined. A chemical sensor array was developed for the purpose of measuring wastewater odour. This paper describes the development of the chemical sensor system which is specifically tuned to odours of wastewater origin and which can give an electronic measure of the wastewater odours. Odour emissions from a wastewater treatment facility were detected by using a quartz crystal microbalance (QCM) sensor array. The array consists of nine sensor elements, which were coated with different materials. In this paper, the usage of these novel instruments in the water industry was shown.     

The impact of COVID-19 pandemic in medical waste amounts: a case study from a high-populated city of Turkey

Journal of Material Cycles and Waste Management - In this study, the amount of medical waste generated in a high-populated city in Turkey between January 2018 and August 2021 was evaluated, and the...     

Higher number of microplastics in tumoral colon tissues from patients with colorectal adenocarcinoma

Environmental Chemistry Letters - Microplastics have been detected in marine and terrestrial ecosystems, yet the toxic effects of microplastics on living organisms are poorly known. In particular,...     

Gross alpha and beta activities in tap waters in Eastern Black Sea region of Turkey

Gross alpha and gross beta activities were determined for 27 different tap water samples collected from Eastern Black Sea region of Turkey. The instrumentation used to count the gross alpha and gross beta activities was a alpha/beta counter of the low background multiple detector type with 10 sample detectors (Berthold LB770). The obtained results showed that natural activity concentrations of alpha- and beta-emitting radionuclides in tap water samples did not exceed WHO and ITS recommended levels. Concentrations ranging from 0.2 mBq/l to 15 mBq/l and from 25.2 mBq/l to 264.4 mBq/l were observed for the gross alpha and gross beta activities, respectively. For all samples the gross beta activities were higher than the corresponding gross alpha activities.     

Case Studies from Turkey: Xenobiotic-containing Industries, Wastewater Treatment and Modeling

Xenobiotic compounds are widely used in several industries; hence they frequently appear in industrial wastewaters. It is a well-known fact that even the discharge of conventionally treated wastewater may have adverse effects on the receiving water environment. Turkey, a developing EU applicant country, has many industrial sectors producing large amounts of xenobiotic-containing wastewaters. The problem is only enlarged by the lack of monitoring of these substances due to the deficiencies associated with their analysis and detection. Thus, studies in Turkey are based on the use of some collective parameters as a substitute for the xenobiotic itself. Biological, physicochemical, and integrated treatment technologies have been investigated for the removal and/or minimization of the possible adverse effects of xenobiotics in industrial wastewaters. In this respect, this paper provides an overview of the studies conducted on xenobiotic-containing wastewaters from specific industries in Turkey. Although the studies add invaluable information to the scientific background on the subject, new research on the exact biochemical mechanisms of xenobiotic biodegradation will further extend our understanding for improving treatment.     

Radioactivity concentrations and dose assessment for soil samples around Adana, Turkey

The concentrations of natural radionuclides in surface soils around Adana, Turkey were determined using gamma ray spectrometry with an HPGe detector. The natural gamma ray radioactivity of the terrestrial radionuclides in air was calculated throughout different areas of Adana. The average activity concentrations of (238)U, (232)Th and (40)K were found to be 17.6, 21.1 and 297.5 Bq kg(-1), respectively. Outdoor gamma dose measurements in air 1m above ground level were determined by using a portable gamma scintillation detector. The gamma dose measurements in air were taken from the same places where soil samples were taken. Average outdoor gamma dose rates in sample stations were determined as 67 nGy h(-1). The annual effective dose to the public was found to be 82 microSv.     

Recycling the low-density polyethylene pellets in the pervious concrete production

Journal of Material Cycles and Waste Management - The main target of this study is to experimentally investigate the possibility of recycling of low-density polyethylene (LDPE) pellets as aggregate...