De-novo formation of dioxins and furans and the memory effect in waste incineration flue gases

The formation of dioxin (polychlorinated-rho-dibenzodioxins - PCDD) and furan (polychlorinated dibenzofurans - PCDF) in waste incineration flyash in relation to temperature has been investigated in a bench scale reactor. The PCDD/PCDF released into the exhaust gases of the reactor and trapped in a condensation and vapour phase adsorption system were also determined. The concentrations of PCDD/PCDF in the flyash were analysed in detail for all congeners and isomers including the mono-, di- and tri-PCDD/PCDF. De-novo synthesis of PCDD/PCDF was clearly seen in the flyash with large changes in concentrations of PCDD/PCDF with only small changes in temperature. Exhaust gas PCDD/PCDF were detected at all temperatures, with the maximum emission occurring at a flyash temperature of 350 degrees C, where the equivalent of over 42 times the total dioxin/furan concentration of the original flyash was lost to the vapour phase per unit mass of initial flyash. Although the desorbed species were mainly the lower mono- to tri-congener group of dioxins and furans, the desorbed dioxin/furans had a considerable toxic equivalent value.     

PCDD/PCDF Isomer patterns in waste incinerator flyash and desorbed into the gas phase in relation to temperature

The influence of temperature on the PCDD and PCDF isomer profiles of a municipal waste incinerator flyash and the PCDD/PCDF desorbed from the ash under an inert atmosphere was investigated using a bench-scale reactor. Exposure to temperatures of 250 degrees C and above resulted in significant changes in the distribution of isomers within most dioxin and furan congener groups. The PCDD content tended to become more evenly distributed across the range of isomers than was the case for the raw flyash, while the PCDF content became concentrated across a relatively lower number of isomers. In most cases the desorbed PCDD/PCDF were mainly mono- to tri-chlorinated, and hence had a relatively low I-TEQ value. The isomer profiles of the desorbed species were also influenced by temperature. There were some significant differences between the PCDF isomer profiles of the desorbed species and those of the treated flyashes under the same conditions, but no clear differences between the PCDD isomer profiles.     

Desorption of PCDD/PCDF from municipal solid waste incinerator flyash under post-combustion plant conditions

The influence of temperature on the levels of PCDD and PCDF remaining in, and desorbed from, a municipal solid waste incinerator flyash was investigated by heating the ash to between 200 and 400 degrees C under a simulated flue gas for four days reaction time. Considerable desorption of PCDD/PCDF from the flyash was seen at 275 degrees C and above. Maximum desorption occurred at 350 degrees C, with the equivalent of nearly eight times the total PCDD/PCDF concentration of the original flyash being lost to the vapour phase per unit mass of initial flyash. The I-TEQ value of the desorbed PCDD/PCDF was considerable, being over fourteen times that of the original flyash at 325 degrees C. The results indicate that formation of PCDD/PCDF on flyash deposits in the post-combustion plant of incinerators can result in the release of significant amounts of PCDD/PCDF to the flue gas stream.     

Concentrations of organophosphate esters and brominated flame retardants in German indoor dust samples

While it is known that the ingestion of indoor dust contributes substantially to human exposure to the recently restricted polybrominated diphenyl ethers (PBDEs), the situation for one class of potential replacements, i.e. organophosphate esters (OPEs), used in a variety of applications including as flame retardants has yet to be fully characterised. In this study, surface dust from twelve different cars from various locations throughout Germany were analysed for eight OPEs, decabromodiphenyl ethane (DBDPE), and eight PBDEs. In five cars, tris-(1,3-dichloro-2-propyl) phosphate (TDCPP) was the dominant compound with concentrations up to 620 μg g(-1) dust. High concentrations of tri-cresyl phosphate (TCP) (up to 150 μg g(-1)) were also detected in two samples of car dust. Dust from ten offices in the same building in Ludwigsburg, Germany was also analysed. In these samples, tri (2-butoxyethyl) phosphate (TBEP) predominated with an average concentration of 7.0 μg g(-1) dust, followed by tris (1-chloro-2-propyl) phosphate (TCPP) at 3.0 μg g(-1) and triphenyl phosphate (TPhP) at 2.5 μg g(-1) dust. Although caution must be exercised given the relatively small database reported here; this study provides evidence that cars and offices from Germany are significantly more contaminated with OPEs than PBDEs. Average concentrations of ΣOPEs were ten times higher in car than in office dust. This is the first study to provide data on a wide range of OPE concentrations in German indoor dust samples.     

Does Including Soil Moisture Observations Improve Operational Streamflow Forecasts in Snow‐Dominated Watersheds?

Changing climate and growing water demand are increasing the need for robust streamflow forecasts. Historically, operational streamflow forecasts made by the Natural Resources Conservation Service have relied on precipitation and snow water equivalent observations from Snow Telemetry (SNOTEL) sites. We investigate whether also including SNOTEL soil moisture observations improve April‐July streamflow volume forecast accuracy at 0, 1, 2, and 3‐month lead times at 12 watersheds in Utah and California. We found statistically significant improvement in 0 and 3‐month lead time accuracy in 8 of 12 watersheds and 10 of 12 watersheds for 1 and 2‐month lead times. Surprisingly, these improvements were insensitive to soil moisture metrics derived from soil physical properties. Forecasts were made with volumetric water content (VWC) averaged from October 1 to the forecast date. By including VWC at the 0‐month lead time the forecasts explained 7.3% more variability and increased the streamflow volume accuracy by 8.4% on average compared to standard forecasts that already explained an average 77% of the variability. At 1 to 3‐month lead times, the inclusion of soil moisture explained 12.3‐26.3% more variability than the standard forecast on average. Our findings indicate including soil moisture observations increased statistical streamflow forecast accuracy and thus, could potentially improve water supply reliability in regions affected by changing snowpacks.     

Dioxins and furans in emissions from medical waste incinerators

Dioxins and furans were detected in emissions from eight medical waste incinerators tested in California. Total uncontrolled emissions ranged from 363 to 11, 811 nanograms per dry standard cubic meter. The most effective of three wet scrubbers achieved an emissions control efficiency of 95 percent for total PCDD and PCDF. A baghouse was less than 30 percent efficient in removing PCDD and PCDF from the incinerator emissions.     

Removal of biocide pentachlorophenol in water system by the spent mushroom compost of Pleurotus pulmonarius

Pentachlorophenol (PCP) has been widely used as a wood preservative since 1980s. Although it has been banned worldwide, residues of PCP are still commonly found. The spent compost of oyster mushroom Pleurotus pulmonarius (SMC) which was a degraded paddy straw-based substrate, contained 25% chitin. Five percentage of the SMC could remove 89.0 +/- 0.4% of 100 mg PCPl(-1) within 2 days at room temperature predominantly by biodegradation. The maximum removal capacity was 15.5 +/- 1.0 mg g(-1) SMC. The sorption kinetics of PCP by SMC can be described by the Freundlich monolayer model with a theoretical sorption capacity similar to that found for chitin. A PCP-degradative bacterium was isolated from the SMC. Yet, biodegradation was predominantly contributed by the immobilized ligninolytic enzymes secreted by the mushroom to the SMC. Degradation of PCP involves dechlorination, methylation, carboxylation and ring cleavage as verified by GC-MSD and ion chromatography. Thus, the SMC has a potential for treating PCP-contaminated water.     

From food to pest: Conversion factors determine switches between ecosystem services and disservices

Ecosystem research focuses on goods and services, thereby ascribing beneficial values to the ecosystems. Depending on the context, however, outputs from ecosystems can be both positive and negative. We examined how provisioning services of wild animals and plants can switch between being services and disservices. We studied agricultural communities in Laos to illustrate when and why these switches take place. Government restrictions on land use combined with economic and cultural changes have created perceptions of rodents and plants as problem species in some communities. In other communities that are maintaining shifting cultivation practices, the very same taxa were perceived as beneficial. We propose conversion factors that in a given context can determine where an individual taxon is located along a spectrum from ecosystem service to disservice, when, and for whom. We argue that the omission of disservices in ecosystem service accounts may lead governments to direct investments at inappropriate targets.

     

Local Arctic air pollution: Sources and impacts

Local emissions of Arctic air pollutants and their impacts on climate, ecosystems and health are poorly understood. Future increases due to Arctic warming or economic drivers may put additional pressures on the fragile Arctic environment already affected by mid-latitude air pollution. Aircraft data were collected, for the first time, downwind of shipping and petroleum extraction facilities in the European Arctic. Data analysis reveals discrepancies compared to commonly used emission inventories, highlighting missing emissions (e.g. drilling rigs) and the intermittent nature of certain emissions (e.g. flaring, shipping). Present-day shipping/petroleum extraction emissions already appear to be impacting pollutant (ozone, aerosols) levels along the Norwegian coast and are estimated to cool and warm the Arctic climate, respectively. Future increases in shipping may lead to short-term (long-term) warming (cooling) due to reduced sulphur (CO₂) emissions, and be detrimental to regional air quality (ozone). Further quantification of local Arctic emission impacts is needed.     

Dietary PBDE intake: a market-basket study in Belgium

A food market-basket, representative for the general Belgian population, containing various meat, fish and dairy food products, was assembled and analysed for its polybrominated diphenyl ether (PBDE) content. Additionally, fast food samples were also investigated. Based on the measured PBDE levels, an average daily dietary intake estimate of PBDEs was calculated. Of all foods analysed, fish had the highest average sum of PBDE levels (BDEs 28, 47, 99, 100, 153, 154, and 183; 460 pg/g ww), followed by dairy products and eggs (260 pg/g ww), fast food (86 pg/g ww) and meat products (70 pg/g ww). One fresh salmon filet had the highest total concentration of PBDEs (2360 pg/g ww), whereas levels in steak and chicken breast were the lowest of all foods analysed. BDE 209 was never found above LOQ in any food. PBDE intake calculations were based on the average daily food consumption in Belgium and were estimated between 23 and 48 ng/day of total PBDEs (lower and upper bound). This value is in accordance with what was previously reported for diets from geographical distinct areas, such as Canada, Finland, Spain, Sweden and the UK. Although it is only a minor constituent of the Belgian diet, fish is the major contributor to the total daily PBDE-intake (around 40%) due to the high PBDE levels in this type of food. Although low contaminated, meat products account for around 30% of the total dietary intake of PBDEs. Dairy products and eggs contribute to a lesser degree (less than 30%).