Isolation of mesotrione-degrading bacteria from aquatic environments in Brazil

Mesotrione is a benzoylcyclohexane-1,3-dione herbicide that inhibits 4-hydroxyphenyl pyruvate dioxygenase in target plants. Although it has been used since 2000, only a limited number of degrading microorganisms have been reported. Mesotrione-degrading bacteria were selected among strains isolated from Brazilian aquatic environments, located near corn fields treated with this herbicide. Pantoea ananatis was found to rapidly and completely degrade mesotrione. Mesotrione did not serve as a sole C, N, or S source for growth of P. ananatis, and mesotrione catabolism required glucose supplementation to minimal media. LC-MS/MS analyses indicated that mesotrione degradation produced intermediates other than 2-amino-4-methylsulfonyl benzoic acid or 4-methylsulfonyl-2-nitrobenzoic acid, two metabolites previously identified in a mesotrione-degrading Bacillus strain. Since P. ananatis rapidly degraded mesotrione, this strain might be useful for bioremediation purposes.     

Soil nitrogen transformations under elevated atmospheric CO₂ and O₃ during the soybean growing season

We investigated the influence of elevated CO₂ and O₃ on soil N cycling within the soybean growing season and across soil environments (i.e., rhizosphere and bulk soil) at the Soybean Free Air Concentration Enrichment (SoyFACE) experiment in Illinois, USA. Elevated O₃ decreased soil mineral N likely through a reduction in plant material input and increased denitrification, which was evidenced by the greater abundance of the denitrifier gene nosZ. Elevated CO₂ did not alter the parameters evaluated and both elevated CO₂ and O₃ showed no interactive effects on nitrifier and denitrifier abundance, nor on total and mineral N concentrations. These results indicate that elevated CO₂ may have limited effects on N transformations in soybean agroecosystems. However, elevated O₃ can lead to a decrease in soil N availability in both bulk and rhizosphere soils, and this likely also affects ecosystem productivity by reducing the mineralization rates of plant-derived residues.     

Determining Sources of Fecal Bacteria in Waterways

The microbiological contamination of waterways by pathogenic microbes has been, and is still, a persistent public safety concern in the United States and in most countries of the world. As most enteric pathogens are transmitted through the fecal–oral route, fecal pollution is generally regarded as the major contributor of pathogens to waterways. Fecal pollution of waterways can originate from wastewater treatment facilities, septic tanks, domestic- and wild-animal feces, and pets. Because enteric pathogens are derived from human or animal sources, techniques capable of identifying and apportioning fecal sources have been intensively investigated for use in remediation efforts and to satisfy regulatory concerns. Pollution of human origin is of the most concern, since human feces is more likely to contain human-specific enteric pathogens. Fecal indicator bacteria have been used successfully as the primary tool for microbiologically based risk assessment. However measurement of fecal indicator bacteria does not define what pathogens are present, or define the sources of these bacteria. Microbial source tracking (MST) methods that have the ability to differentiate among sources of fecal pollution are currently under development. These methods will ultimately be useful for risk assessment purposes and to aid regulatory agencies in developing strategies to remediate microbiologically impaired waterways.     

Task type as a moderator of positive/negative feedback effects on motivation and performance: A regulatory focus perspective

Applying Higgins' regulatory focus theory, we hypothesized that the effect of positive/negative feedback on motivation and performance is moderated by task type, which is argued to be an antecedent to situational regulatory focus (promotion or prevention). Thus, first we demonstrated that some tasks (e.g., tasks requiring creativity) are perceived as promotion tasks, whereas others (e.g., those requiring vigilance and attention to detail) are perceived as prevention tasks. Second, as expected, our tests in two studies of the moderation hypothesis showed that positive feedback increased self‐reported motivation (meta‐analysis across samples: N = 315, d = 0.43) and actual performance (N = 55, d = 0.67) among people working on promotion tasks, relative to negative feedback. Positive feedback, however, decreased motivation (N = 318, d = ?0.33) and performance (N = 55, d = ?0.37) among individuals working on prevention tasks, relative to negative feedback. These findings suggest that (a) performance of different tasks can affect regulatory focus and (b) variability in positive/negative feedback effects can be partially explained by regulatory focus and task type. Copyright © 2010 John Wiley & Sons, Ltd.     

Study of the biouptake of labeled single-walled carbon nanotubes using fluorescence-based method

Single-wall carbon nanotubes (CNT) are one of the most attractive engineered nanomaterials due to their unique electrical, mechanical and thermal properties, and potential use in a variety of commercial products. Due to their small size, CNT could become easily airborne and reach the various environmental compartments and eventually the food chain and humans. However, the environmental fate processes and health impacts of CNT are not clear. This study investigated a method for the quantitative measurement of carbon nanotube (CNT) in natural media such soil and benthic organism tissues. Fluorescence dye Nile blue was used for noncovalent labeling of CNT to enable their fluorescence detection. Labeled nanotubes were successfully detected in soil samples as well as in worm tissue. We were also able to detect the presence of labeled carbon nanotubes in worms exposed for 1 week to CNT-laden soil, which indicates CNT may transfer through environmental food web. The method allows for laboratory measurements of CNT mass transfer and partitioning into various environmental systems.     

Hele-Shaw beach creation by breaking waves: a mathematics-inspired experiment

Fundamentals of nonlinear wave-particle interactions are studied experimentally in a Hele-Shaw configuration with wave breaking and a dynamic bed. To design this configuration, we determine, mathematically, the gap width which allows inertial flows to survive the viscous damping due to the side walls. Damped wave sloshing experiments compared with simulations confirm that width-averaged potential-flow models with linear momentum damping are adequately capturing the large scale nonlinear wave motion. Subsequently, we show that the four types of wave breaking observed at real-world beaches also emerge on Hele-Shaw laboratory beaches, albeit in idealized forms. Finally, an experimental parameter study is undertaken to quantify the formation of quasi-steady beach morphologies due to nonlinear, breaking waves: berm or dune, beach and bar formation are all classified. Our research reveals that the Hele-Shaw beach configuration allows a wealth of experimental and modelling extensions, including benchmarking of forecast models used in the coastal engineering practice, especially for shingle beaches.     

Design of a Cost-Effective Weighing Facility for PM2.5 Quality Assurance

Abstract

The U.S. Environmental Protection Agency (EPA) Quality Assurance (QA) Guidance Document 2.12: Monitoring PM_2.5 in Ambient Air Using Designated Reference or Class I Equivalent Methods¹ (Document 2.12) requires conditioning of PM_2.5 filters at 20-23 °C and 30-40% relative humidity (RH) for 24 hr prior to gravimetric analysis. Variability of temperature and humidity may not exceed ±2 °C and ±5% RH during the conditioning period. The quality assurance team at EPA Region 2’s regional laboratory designed a PM_2.5 weighing facility that operates well within these strict performance requirements.

The traditional approach to meeting the performance requirements of Document 2.12 for PM_2.5 filter analysis is to build a walk-in room, with costs typically exceeding $100,000. The initial one-time capital cost for the laboratory at EPA’s Edison, NJ, facility was approximately $24,000. Annual costs [e.g., National Institute of Standards and Technology (NIST) recertifications and nitrogen replacement cylinders used for humidity control] are approximately $500. The average 24-hr variabilities in temperature and RH in the Region 2 weighing chamber are small, ±0.2 °C and ±0.8% RH, respectively. The mass detection limit for the PM_2.5 weighing system of 47-mm stretched Teflon (lab blank) filters is 6.3 μg. This facility demonstrates an effective and economical example for states and other organizations planning PM_2.5 weighing facilities.     

Reevaluation of the sex pheromone of the lesser date moth, Batrachedra amydraula, using autosampling SPME-GC/MS and field bioassays

In a previous study of the sex pheromone of the lesser date moth, Batrachedra amydraula, using laboratory females, (Z4,Z7)-4,7-decadien-1-yl acetate, Z4-decen-1-yl acetate, Z5-decen-1-yl acetate and decyl acetate were identified by sequential SPME-GC/MS analysis. Traces of Z5-decen-1-ol were detected only in airborne collections. Concomitant field tests and re-evaluation of the composition of the sex pheromone of B. amydraula with feral female moths, using an improved sequential SPME-GC/MS procedure revealed a complex mixture of candidate pheromonal compounds. The same unsaturated acetates and the corresponding alcohols: (Z4,Z7)-4,7-decadien-1-ol, Z4-decen-1-ol, Z5-decen-1-ol were positively identified. In addition, the corresponding aldehydes, octanol and octyl acetate were also detected. All compounds were found to be released in a circadian rhythm, in a narrow time window of 2 h, approximately 1 h before sunrise. Comprehensive field bioassays indicated that the optimal attractive blend is a three-component mixture of (Z4,Z7)-4,7-decadien-1-yl acetate, Z5-decen-1-yl acetate and Z5-decen-1-ol in a ratio of 1:2:2. This blend gave about fivefold higher trap catch of B. amydraula males as compared to the previously published binary blend of (Z4,Z7)-4,7-decadien-1-yl acetate and Z5-decen-1-yl acetate in a ratio of 1:2. The alcohol Z5-decen-1-ol is an essential synergistic component of the sex pheromone of B. amydraula. All other identified compounds are inert, being neither synergists nor inhibitors of the pheromone. The optimal pheromone blend will be a useful tool in monitoring and control of B. amydraula, which is a serious pest of date plantations throughout the Middle East and northern Africa.