Metal contents in the groundwater of Sahebgunj district, Jharkhand, India, with special reference to arsenic

A detailed study has been presented on groundwater metal contents of Sahebgunj district in the state of Jharkhand, India with special reference to arsenic. Both tubewell and well waters have been studied separately with greater emphasis on tubewell waters. Groundwaters of all the nine blocks of Sahebgunj district have been surveyed for iron, manganese, calcium, magnesium, copper and zinc in addition to arsenic. Normal distribution statistic, exploratory data analysis and robust Z-score analysis have been employed to find out the distribution pattern, localisation of data, outliers and other related information. Groundwaters of three blocks of Sahebgunj, namely, Sahebgunj, Rajmahal and Udhawa have been found to be alarmingly contaminated with arsenic present at or above 10 ppb. Arsenic distribution patterns in these blocks are highly asymmetric in nature with the common feature of increasing width from first to fourth quartile. A very broad fourth quartile in each case represents a long asymmetric tail on the right of the median. Tubewell waters of at least two more blocks require regular monitoring to identify the outbreak of arsenic at the onset. Groundwaters of Sahebgunj district in general contain high iron and manganese. It is by and large soft in nature. Well waters have been found to be better with regard to arsenic but iron and manganese contents do not vary significantly. Normal distribution analysis (NDA), box and whisker (BW) plot and Z-score analysis together can provide a reasonably complete statistical picture of metal contents in Sahebgunj district groundwaters.     

Heavy metals alter photosynthetic pigment profiles as well as activities of chlorophyllase and 5-aminolevulinic acid dehydratase (ALAD) in Amaranthus lividus seedlings

Varied concentrations of PbCl2 and CdCl2 in the germinating media reduced the total chlorophyll and carotenoid contents in primary leaves of Amaranthus lividus seedlings (168 h old). When chlorophyll a and chlorophyll b contents were measured separately, greater loss of chl b than chl a under the identical conditions of heavy metal treatment was observed In addition, the loss of total chlorophyll was more than carotenoids under the same magnitude of heavy metal treatment. The effect of heavy metal treatment at germination stage was further studied on chlorophyll accumulation in primary leaves in relation to the activities of 5-aminolevulinic acid dehydratase (ALAD) and chlorophyllase. The activities of ALAD gradually diminished in response to both the heavy metals in a concentration-guided manner, while the activities of chlorophyllase did not exhibit any significant change.     

Evaluation and standardisation of a simple HG-AAS method for rapid speciation of As(III) and As(V) in some contaminated groundwater samples of West Bengal, India

A simple HG-AAS technique has been evaluated and standardised for rapid speciation of As(III) and As(V) in a number of contaminated groundwater samples of West Bengal, India. Citric acid has been used for selective hydride formation of As(III). The sensitivity of the evaluated HG-AAS method is 7.91 mg(-1)l, standard deviation, 0.001 and detection limit, 0.4 microg l(-1). As(III) sensitivity remains constant in the sample pH range of 2.3-10.6. Concomitant mineral matrix of the water samples did not interfere with arsenic determination. Eight out of ten groundwater samples analysed for As(IlI)and As(V) contain more As(III), which lies in the range of 54-350 ppb. As(III) estimation in drinking water along with total arsenic should be invoked as a policy for a realistic risk assessment of the contaminated water.     

Statistical Optimization of Polyhydroxybutyrate Production by <Emphasis Type="Italic">Bacillus Pumilus</Emphasis> H9 Using Cow Dung as a Cheap Carbon Source by Response Surface Methodology

A gram positive bacterium (designated strain H9) found to be a potential polyhydroxybutyrate (biodegradable polymer) producer was isolated from the soil samples of a stress prone environment (municipal waste areas). This bacterium was identified as Bacillus pumilus H9 from its morphological, physiological and 16S rRNA gene sequence analysis. A four-factor central composite rotary design was employed to optimize the medium and to find out the interactive effects of four variables, viz. concentrations of cow dung, sucrose, peptone and pH on PHB production. Using response surface methodology, a second-order polynomial equation was obtained by multiple regression analysis and a yield of 2.47 g/L of PHB dry weight was achieved from the optimized medium at pH 7. Here, we report cow dung as a cheap carbon source for the production of PHB. Further, phbA, phbB and phbC genes were amplified by polymerase chain reaction which confirms the bacterium to be able to produce polyhydroxybutyrate.     

Protein-Polymer Grafts via a Soy Protein Derived Macro-RAFT Chain Transfer Agent

Methodology to produce materials derived from renewable resources is of great importance in decreasing both environmental impact as well as dependence on fossil fuels. We report a straightforward method of polymer grafting to soy protein hydrolysates, which are available in surplus. Benzylthiocarbonate moieties were installed on the protein surface via amidation of free amino groups, creating a protein macro chain transfer agent (CTA) for reversible addition fragmentation transfer (RAFT) polymerization. We found that subjection of this soy protein macro-CTA (SP-CTA) to RAFT polymerization conditions with polar acrylate monomers resulted in protein-polymer nanometer-scale particles with solubility properties dictated by monomer polarity. Polymer grafting, particle size and polymerization were characterized by elemental analysis, transmission electron microscopy and gel permeation chromatography. We anticipate that this method of grafting will be of use in generation of new materials based on renewable resources.     

Comparative study of the microstructural and magnetic properties of fly ashes obtained from different thermal power plants in West Bengal, India

This paper deals with the physical nature of the fly ashes obtained from two thermal power plants, situated in West Bengal, India. The fly ash samples are characterized by using comprehensive techniques with an emphasis on their ultrafine nature. The particle sizes of the samples are estimated using scanning electron microcopy (SEM) and found to lie within 0.18–5.90 μm. For morphology and compositional analysis, we also use SEM coupled with energy dispersive X-ray spectrometry. From X-ray study of the fly ashes the nature of conglomeration is seen to be crystalline, and the major components are mullite (Al₆Si₂O₁₃) and quartz (SiO₂). The magnetic measurement of the fly ash samples was carried out by SQUID magnetometer. ⁵⁷Fe Mössbauer spectra are obtained using a conventional constant-acceleration spectrometer with a ⁵⁷Co/Rh Mössbauer source. The hyperfine parameters obtained, in general, support the findings as made from XRD analysis and provide a quantitative measure of different iron ions present in the samples. The paper presents experimental data on the physical aspects of the fly ash samples of the thermal power plants which comprise coarse, fine, and ultrafine magnetic particulate materials and attempts to provide an exhaustive analysis.     

Light-induced transformation of tribenuron-methyl on glass, soil, and plant surface

Photolysis of tribenuron-methyl (methyl 2-[[[[N-(4-methoxy-6-methyl-1,3,5triazin-2-yl)methylamino]carbonyl]amino]sulfonyl]benzoate), a sulfonylurea herbicide, was studied as thin film on glass surface, soil surface, and plant surface. A number of photoproducts such as 4-methoxy-6-methyl-2-aminomethyl-1,3,5-triazine; methyl-2-(aminosulfonyl) benzoate; N-(2-carbomethoxyphenyl)-N-(4-methoxy-6-methyl-1,3,5-triazin-2-yl)-N'-methylurea; N-(2-carbomethoxyphenyl sulfonyl)-N-methyl urea; o-benzoic sulfimide and 4-methoxy-6-methyl-2-amino-1,3,5-triazine were identified by comparison of their GC-MS with the authentic standards. The rate of degradation in all the cases followed first-order kinetics with a statistically significant correlation coefficient. Rate of photodegradation was greater on glass surface than on soil surface.     

Colloid transport in a geochemically heterogeneous porous medium: aquifer tank experiment and modeling

To examine colloid transport in geochemically heterogeneous porous media at a scale comparable to field experiments, we monitored the migration of silica-coated zirconia colloids in a two-dimensional layered porous media containing sand coated to three different extents by ferric oxyhydroxides. Transport of the colloids was measured over 1.65 m and 95 days. Colloid transport was modeled by an advection-dispersion-deposition equation incorporating geochemical heterogeneity and colloid deposition dynamics (blocking). Geochemical heterogeneity was represented as favorable (ferric oxyhydroxide-coated) and unfavorable (uncoated sand) deposition surface areas. Blocking was modeled as random sequential adsorption (RSA). Release of deposited colloids was negligible. The time to colloid breakthrough after the onset of blocking increased with increasing ferric oxyhydroxide-coated surface area. As the ferric oxyhydroxide surface area increased, the concentration of colloids in the breakthrough decreased. Model-fits to the experimental data were made by inverse solutions to determine the fraction of surface area favorable for deposition and the deposition rate coefficients for the favorable (ferric oxyhydroxide-coated) and unfavorable sites. The favorable deposition rate coefficient was also calculated by colloid filtration theory. The model described the time to colloid breakthrough and the blocking effect reasonably well and estimated the favorable surface area fraction very well for the two layers with more than 1% ferric oxyhydroxide coating. If mica edges in the uncoated sand were considered as favorable surface area in addition to the ferric oxyhydroxide coatings, the model predicted the favorable surface area fraction accurately for the layer with less than 1% ferric oxyhydroxide coating.     

Virus transport in physically and geochemically heterogeneous subsurface porous media

A two-dimensional model for virus transport in physically and geochemically heterogeneous subsurface porous media is presented. The model involves solution of the advection-dispersion equation, which additionally considers virus inactivation in the solution, as well as virus removal at the solid matrix surface due to attachment (deposition), release, and inactivation. Two surface inactivation models for the fate of attached inactive viruses and their subsequent role on virus attachment and release were considered. Geochemical heterogeneity, portrayed as patches of positively charged metal oxyhydroxide coatings on collector grain surfaces, and physical heterogeneity, portrayed as spatial variability of hydraulic conductivity, were incorporated in the model. Both layered and randomly (log-normally) distributed physical and geochemical heterogeneities were considered. The upstream weighted multiple cell balance method was employed to numerically solve the governing equations of groundwater flow and virus transport. Model predictions show that the presence of subsurface layered geochemical and physical heterogeneity results in preferential flow paths and thus significantly affect virus mobility. Random distributions of physical and geochemical heterogeneity have also notable influence on the virus transport behavior. While the solution inactivation rate was found to significantly influence the virus transport behavior, surface inactivation under realistic field conditions has probably a negligible influence on the overall virus transport. It was further demonstrated that large virus release rates result in extended periods of virus breakthrough over significant distances downstream from the injection sites. This behavior suggests that simpler models that account for virus adsorption through a retardation factor may yield a misleading assessment of virus transport in "hydrogeologically sensitive" subsurface environments.