Hematology and Some Biochemical Parameters of Wild Rodents in Pistachio Gardens of Kerman Province, Southeast Iran

Wild rodents were collected using live snap traps in pistachio gardens of Kerman Province, Southeast Iran from 2007 to 2009, then some physiological parameters of them were measured. The samples were identified as follow: Nesokia indica, Meriones persicus, Meriones lybicus and Tatera indica. Blood samples were obtained from the heart, then the blood parameters (glucose, cholesterol, triglyceride, total protein, HDL, red and white blood cell number) in wild species of rodents and laboratory rat were compared. The results showed that there were no significant differences in serum glucose, triglyceride, HDL and total protein levels among different experimental groups. The concentration of cholesterol in T. indica was more than that in N. indica (P < 0.01). The total numbers of red blood cells also showed significant difference between wild garden rodent species and laboratory rat (P < 0.01), while the numbers of white blood cells showed no significant difference.     

Validation of spectral gas radiation models under oxyfuel conditions. Part A: Gas cell experiments

Combustion of hydrocarbon fuels with pure oxygen results in a different flue gas composition as combustion with air. Standard CFD spectral gas radiation models for air combustion are out of their validity range. The series of three articles provides a common spectral basis for the validation of new developed models. In part A of the series gas cell transmissivity spectra in the spectral range of 2.4–5.4 μm of water vapor and carbon dioxide in the temperature range from 727 to 1500 ° C and at different concentrations were compared at a nominal resolution of 32 cm^?1 to line-by-line models from different databases, two statistical-narrow-band models and the exponential wide band model. The two statistical-narrow-band models EM2C and RADCAL showed a good agreement with a maximal band transmissivity deviation of 3%. The exponential-wide-band model showed a deviation of 6%. The new line-by-line database HITEMP2010 had the lowest band transmissivity deviation of 2.2% and was recommended as a reference model for the validation of simplified CFD models.     

Legislative and environmental issues on the use of ash from coal and municipal sewage sludge co-firing as construction material

For the economy of any co-firing process, it is important that the common waste management options of ash remain practical. Ash from bituminous coal combustion is typically handed to the construction industry. This paper describes the current European legislation on use of ash for construction purposes. Also, it presents an experimental study on the suitability of fly ash from combustion of mixtures of bituminous coal and municipal sewage sludge as additive to cement and concrete, and for use in open-air construction works, based on the ash chemical composition and the characteristics of the extract of the ash. Presently, two European standards forbid the use of ash from co-firing as additive to cement or concrete. This study shows that ash derived from coal and sewage sludge co-firing contains generally less unburned carbon, alkali, magnesium oxide, chlorine, and sulfate than coal ash. Only the concentration of free lime in mixed ash is higher than in coal, even though, at least up to 25% of the thermal input, still below the requirements of the standards. This ash also meets the requirements for the use of fly ash in open-air construction works--concentration and mobility of few elements--although this management option is forbidden to ash from co-firing. The leaching of Cd, Cr, Cu, Ni, Pb and Zn was investigated with three leaching tests. The concentration of these metals in the extracts was below the detection limit in most cases. The concentration of Cu and Zn in the extract from fly ash was found to increase with increasing share of sewage sludge in the fuel mixture. However, the concentration of these two metals in the extract is not regulated. This study indicates that excluding a priori the use of ash from co-firing as a suitable additive for construction material could cause an unnecessary burden on the environment, since probably ash would have to be disposed of in landfill. However, allowing this requires the modification of current European standards to include limitations on all elements and compounds, absent in coal but which might be present in other fuels, that are deleterious for the quality of construction materials.     

Parametric investigation of the calcium looping process for CO2 capture in a 10 kWth dual fluidized bed

Calcium looping (CaL) is a promising post-combustion CO₂ capture technology which is carried out in a dual fluidized bed (DFB) system with continuous looping of CaO, the CO₂ carrier, between two beds. The system consists of a carbonator, where flue gas CO₂ is adsorbed by CaO and a regenerator, where captured CO₂ is released. The CO₂-rich regenerator flue gas can be sequestered after gas processing and compression. A parametric study was conducted on the 10 kW_th DFB facility at the University of Stuttgart, which consists of a bubbling fluidized bed carbonator and a riser regenerator. The effect of the following parameters on CO₂ capture efficiency was investigated: carbonator space time, carbonator temperature and calcium looping ratio. The active space time in the carbonator, which is a function of the space time and the calcium looping ratio, was found to strongly correlate with the CO₂ capture efficiency. BET and BJH techniques provided surface area and pore volume distribution data, respectively, for collected sorbent samples. The rate of sorbent attrition was found to be 2 wt.%/h which is below the expected sorbent make-up rate required to maintain sufficient sorbent activity. Steady-state CO₂ capture efficiencies greater than 90% were achieved for different combinations of operational parameters. Moreover, the experimental results obtained were briefly compared with results derived from reactor modeling studies. Finally, the implications of the experimental results with respect to commercialization of the CaL process have been assessed.     

A preliminary study of temporal differences in serum concentrations of perfluoroalkyl acids,among New York anglers,in the absence of known changes in manufacturing practices

Perfluorinated compounds have been manufactured in large quantities and used in myriad industrial processes and commercial applications. The aim of this preliminary study was to generate hypotheses with regard to differences in body burdens of perfluoroalkyl acids, among a sub-sample of participants from the New York State Angler Cohort Study, over a time interval during which no known substantial changes occurred in US manufacturing practices or commercial use. Paired serum specimens, collected from 15 subjects in 1993–1994 (time 1), and in 1995–1997 (time 2), with a minimum interval of 2.5 years, were assayed for PFDA, PFHpA, PFHxS, PFNA, PFOA, PFOS, PFOSA and PFUnDA using HPLC with ES-MS/MS. By subject, differences in concentrations between time 1 and time 2 were estimated, employing paired t-tests, correlations, and multivariable linear regression to accommodate heterogeneity in duration between specimens, and in time 1 concentrations. A statistically significant (P < 0.05) adjusted mean decrease of 0.16 ng mL^?1 (18.8%) between time 1 and 2 was detected for PFNA, and an adjusted mean increase of 0.54 ng mL^?1 (56.8%) was detected for PFOA. The results of this study may be indicative of short-term changes in human body burdens of PFNA and PFOA in association with local exposure sources.     

Lead in New York City community garden chicken eggs: influential factors and health implications

Raising chickens for eggs in urban areas is becoming increasingly common. Urban chickens may be exposed to lead, a common urban soil contaminant. We measured lead concentrations in chicken eggs from New York City (NYC) community gardens and collected information on factors that might affect those concentrations. Lead was detected between 10 and 167 μg/kg in 48 % of NYC eggs. Measures of lead in eggs from a henhouse were significantly associated (p < 0.005) with lead concentrations in soil. The association between soil and egg lead has been evaluated only once before, by a study of a rural region in Belgium. In our study, the apparent lead soil-to-egg transfer efficiency was considerably lower than that found in Belgium, suggesting that there may be important geographic differences in this transfer. We developed models that suggested that, for sites like ours, lead concentrations in >50 % of eggs from a henhouse would exceed store-bought egg concentrations (<7–13 μg/kg; 3 % above detection limit) at soil lead concentrations >120 mg/kg and that the concentration in one of six eggs from a henhouse would exceed a 100 μg/kg guidance value at soil lead concentrations >410 mg/kg. Our models also suggested that the availability of dietary calcium supplements was another influential factor that reduced egg lead concentrations. Estimates of health risk from consuming eggs with the lead concentrations we measured generally were not significant. However, soil lead concentrations in this study were <600 mg/kg, and considerably higher concentrations are not uncommon. Efforts to reduce lead transfer to chicken eggs and associated exposure are recommended for urban chicken keepers.     

Validation of spectral gas radiation models under oxyfuel conditions—Part B: Natural gas flame experiments

Combustion of hydrocarbon fuels with pure oxygen results in a different flue gas composition as combustion with air. Standard CFD spectral gas radiation models for air blown combustion are out of their validity range. The series of three articles provides a common spectral basis for the validation of new developed models. Part B of the series presents spectral measurements in the spectral range of 2.4–5.4 μm of a 70 kW turbulent natural gas flame in air blown combustion and in wet and dry oxyfuel combustion. The experimentally measured intensity spectra were compared with simulated spectra based on measured gas atmospheres. The line-by-line database HITEMP2010 and the two statistical-narrow-band models EM2C and RADCAL were used for the numerical simulation. The measured spectra showed large fluctuations due to turbulence. The up to 75% increased averaged experimental intensity compared to the simulated intensity pointed out the importance of the effect of turbulence-radiation-interaction in combustion simulations.