Development of an ombrotrophic peat bog (low ash) reference material for the determination of elemental concentrations

Given the increasing interest in using peat bogs as archives of atmospheric metal deposition, the lack of validated sample preparation methods and suitable certified reference materials has hindered not only the quality assurance of the generated analytical data but also the interpretation and comparison of peat core metal profiles from different laboratories in the international community. Reference materials play an important role in the evaluation of the accuracy of analytical results and are essential parts of good laboratory practice. An ombrotrophic peat bog reference material has been developed by 14 laboratories from nine countries in an inter-laboratory comparison between February and October 2002. The material has been characterised for both acid-extractable and total concentrations of a range of elements, including Al, As, Ca, Cd, Cr, Cu, Fe, Hg, Mg, Mn, Na, Ni, P, Pb, Ti, V and Zn. The steps involved in the production of the reference material (i.e. collection and preparation, homogeneity and stability studies, and certification) are described in detail.     

Heavy Metal Toxicity Responses of Two Willow (Salix) Varieties Grown Hydroponically: Development of a Tolerance Screening Test

The E.U. funded BIORENEW project is investigating bioremediation of industrially degraded land using biomass fuel crops, including willow. One of its goals is to develop a rapid screening test to assess the metal tolerance of large numbers of willow varieties. This should reflect how a plant will respond to heavy metals under various field conditions and in the long term. A preliminary experiment tested two varieties of contrasting ability to thrive in metal-contaminated soils. Trees were exposed to a metal cocktail in three different strengths of background solution. An appropriate strength solution (1/4 strength Hoaglands) was identified for differentiating variety performance, based on its effect on the biomass of plant fractions relative to control fractions. This is a response to heavy metals which can be quantified rapidly and simply. The relative performance of the varieties was comparable to their performance in field studies. This test will be used to assess the tolerance of further varieties.     

Sorption of Cu and Zn by bone charcoal

Bone charcoal is being developed as a treatment for decontaminating polluted water. In particular, its potential to adsorb metal species from contaminated water supplies is being examined. In this study, bone charcoal was used in batch and column experiments designed to investigate the sorption of two cationic metals Cu and Zn. The data from batch experiments fitted the Langmuir isotherm and so theoretical maximum binding capacities could be obtained. These values were compared with experimental values derived from the column experiments. The mechanisms involved in the immobilisation were also investigated.     

Source term characterisation using concentration trends and geochemical associations of Pb and Zn in river sediments in the vicinity of a disused mine site: Implications for contaminant metal dispersion processes

River sediment at a disused lead-zinc mine was analysed to provide an understanding of the chemical nature of the source term for contaminated sediment exported from the site. Changes in concentration and geochemical associations of Pb and Zn were measured using aqua regia digestion and the BCR sequential extraction procedure. Sediment in the immediate vicinity of the mine was highly contaminated with Pb (max. c. 11,000 mg kg⁻¹) and Zn (max. c. 30,000 mg kg⁻¹), but these values declined rapidly within 1 km of the mine due to dilution and hydraulic sorting. Lead fractionation changed from being predominantly in the reducible fraction to being in the acetic acid-extractable fraction, whereas Zn was predominantly in the residual fraction. This material is transported as fine sediment in the river system.     

Phytoremediation of heavy metal-contaminated land by trees--a review

This paper reviews the potential for using trees for the phytoremediation of heavy metal-contaminated land. It considers the following aspects: metal tolerance in trees, heavy metal uptake by trees grown on contaminated substrates, heavy metal compartmentalisation within trees, phytoremediation using trees and the phytoremediation potential of willow (Salix spp.).     

Cycling of metals in desert soils: effects of Tamarix nilotica and inundation by lake water

Concentrations of Ca, Mg, K, Na, Cu, Zn, Al, Fe and Mn were measured in soils and in Tamarix nilotica from Wadi Allaqi on the shore of Lake Nasser in the Eastern Desert of Egypt. All of the elements were concentrated in the leaves of Tamarix relative to the stems and roots. Leaf:soil concentration ratios, used as an indicator of metal accumulation in the plant, showed high enrichment factors for Na (67.5), K (63.0) and Mg (35.0); of the trace elements measured, Zn had the highest enrichment factor (7.64). Comparison with other desert species suggested that Tamarix was exceptional only in the accumulation of sodium. Periodic inundation of the soil by Lake Nasser caused dilution and dispersion of the accumulated salts.     

Binding of heavy metal contaminants onto chitosans--an evaluation for remediation of metal contaminated soil and water

The binding efficiency of chitosan samples for Ag(+), Cd(2+), Cu(2+), Pb(2+) and Zn(2+) has been evaluated in order to consider their application to remediate metal contaminated soil and water. The sorption behaviour of metal ions was assessed using a batch technique at different contact time and initial metal concentration with different background electrolytes. The kinetics followed a pseudo-second-order model, while the equilibrium data correlated well with the Freundlich and Langmuir isotherm models. For example, the maximum sorption capacity (Q) for chitosan was estimated as 1.93 mmol/g for Ag(+), 1.61 mmol/g for Cu(2+), 0.94 mmol/g for Zn(2+), 0.72 mmol/g for Cd(2+) and 0.64 mmol/g for Pb(2+). Covalent interaction between metal ions and functional groups (amino and hydroxyl) of the chitosans was the main binding mechanism. Ion exchange is not an important process. Chitosan and cross-linked chitosans were able to bind metal ions in the presence of K(+), Cl(-) and NO(3)(-). The nature of Cl(-) and NO(3)(-) ions did not affect Zn(2+) binding by the chitosans. Even at 11x dilution, the chitosans were able to retain metal ions on their surfaces.     

Cadmium phytoextraction using short-rotation coppice Salix: the evidence trail

A substantial body of evidence has now accumulated that raises expectations that clean-up of Cd-contaminated land can be achieved through cultivation and harvest of selected clones of short-rotation coppice willow within a realistic crop lifecycle. Cd uptake rates into Salix are high compared to other trace elements and to other plant species. Effective phytoextraction would require (i) careful targeting of hotspots, (ii) repeated harvest prior to leaf fall and (iii) final removal of the root bole.