Improvement of the BCR three step sequential extraction procedure prior to the certification of new sediment and soil reference materials

The Standards, Measurements and Testing Programme (formerly BCR) of the European Commission proposed a three-step sequential extraction procedure for sediment analysis, following extensive expert consultations and two interlaboratory studies. This scheme was recently used to certify the extractable trace element contents of a sediment reference material (CRM 601). Although this procedure offers a means to ensure the comparability of data in this field, some difficulties concerning the interlaboratory reproducibility still remain, and a new project is currently being conducted to determine the causes of poor reproducibility in the extraction scheme. The final objective of the project is the certification of new sediment and soil reference materials for their extractable contents of Cd, Cr, Cu, Ni, Pb and Zn. This paper presents the results of a small-scale interlaboratory study, which aimed to test a revised version of the extraction schemes by comparing the original and the modified protocols using the CRM 601 sample. This work offers an improvement to the BCR sequential extraction procedure through intercomparison exercises. This improved procedure will allow the obtaining of CRMs to validate analytical data in the analysis of soils and sediments, and it will also facilitate comparability of data in the European Union.     

Encapsulation of Nerol Oil in Polycaprolactone Polymer and Stability Evaluation

Journal of Polymers and the Environment - The objective of this study was to obtain and characterize Nerol essential oil encapsulated in PCL. The miniemulsion and solvent evaporation method was...     

Comparison of leaching tests for the study of trace metals remobilisation in soils and sediments

Several leaching tests were applied and compared to study metal remobilisation on various unpolluted and contaminated soils and on several contaminated sediments. The trace elements considered were Cd, Cr, Cu, Ni, Pb and Zn, and leaching tests consisted of the application of reagents with contrasting characteristics and strengths in order to assess the information provided. An extraction with aqua regia permitted the estimation of the pseudo-total metal content in the sample. Mild extractants such as H2O, CaCl2 and NaNO3 showed low and similar leaching capacities. Acid (CH3COOH) and complexing (EDTA) agents were more effective in remobilising trace metals from soils and sediments. Cd and Zn showed similar extraction characteristics under both extractant solutions, whereas Cu and Pb were more sensitive to complexation, and Ni and Cr to acidification processes. Sequential chemical extractions provided additional information on the association of the trace elements with the different soil and sediment phases. Cd and Zn showed the highest mobility, Pb was associated to reducible solid phases, Cu and Ni to oxidisable phases, and Cr remained mostly in the residual fraction. The results obtained in this paper provided valuable information for choosing a leaching test, which is an instrument of environmental analysis for the estimation of trace metal mobility.     

Application of a modified BCR sequential extraction (three-step) procedure for the determination of extractable trace metal contents in a sewage sludge amended soil reference material (CRM 483), complemented by a three-year stability study of acetic acid and EDTA extractable metal content

This paper provides additional data on a sewage sludge amended soil certified reference material, CRM 483, which was certified in 1997 for its EDTA and acetic acid extractable contents of some trace metals, following standardised extraction procedures. The additional work aimed to test the long-term stability of the material and the applicability of an improved version of the BCR three-step sequential extraction procedure on the sewage sludge amended soil (CRM 483). The paper demonstrates the CRM 483 long-term stability for EDTA and acetic acid extractable contents of Cd, Cr, Cu, Ni, Pb and Zn and gives the results (obtained in the framework of an interlaboratory study) for the extractable contents of the same elements in the CRM 483, following the BCR three-step sequential extraction scheme. The aqua regia extractable contents following the ISO 11466 Standard are also given. The data are given as indicative (not certified) values.     

Prenatal diagnosis of mosaic tetrasomy 5p

We report the prenatal diagnosis of a fetus with tetrasomy 5p mosaicism resulting from a supernumerary isochromosome for the short arm of chromosome 5. The pregnancy was terminated and fetal autopsy revealed minor facial abnormalities (long philtrum, up-slanting palpebral fissures and a broad nasal bridge). Cultures were established from fetal skin, kidney, and pancreas for cytogenetic analysis; the i(5p) was observed only in the skin fibroblasts. To our knowledge, this is the fourth report of mosaic tetrasomy 5p and the first report of prenatal diagnosis of this abnormality. Copyright © 2001 John Wiley & Sons, Ltd.     

Health Impact Evaluation of Boron in Drinking Water: A Geographical Risk Assessment in Northern France

Objective: To evaluate health impact of boron in drinking water. Methods: A regional scale geographical study in Northern France was conducted. Assessment of boron blood levels in a group of 180 healthy individuals and correlation with boron content in drinking water were followed by an assessment of health indicators such as birth rates, mortality rates, and sex ratios in zones of different boron content in drinking water. Results: After necessary adjustments, men living in municipalities with more than 0.30 mg/L of boron in drinking water had elevated but not significant boron blood levels compared with those living in municipalities with boron water levels of less than 0.30 mg/L (159.1 versus 123.0 ng/g; p > 0.05). The standardized birth ratio adjusted for the reference geographic zone and calendar time period was 1.07 and 1.28 in the low and high (>0.3 mg/L) boron content municipalities, respectively. The birth rate in municipalities with high boron content in drinking water was higher than that of the reference geographic zone and of the French general population (p < 10^-4). The standardized mortality ratio adjusted for the reference geographic zone and calendar time period was 0.94 and 0.92 in the low and high boron content municipalities, respectively. The mortality rate in municipalities with high boron content in drinking water was less than that of the reference geographic zone and of the French general population (p < 10^-3). No statistical difference was noted in the male–female sex ratios between the different municipality zones (p = 0.45). Conclusions: The results of this study do not support the idea of a deleterious effect of boron on human health, at the boron water level contents found in this specific region. In fact, there is a tendency toward a beneficial effect with low-dose environmental exposure (less than 1 mg/L of boron) in drinking water.     

Effects of work surface and task difficulty on neck–shoulder posture and trapezius activity during a simulated mouse task

Objectives. The purpose of this study is to evaluate the influence of the work surface and task difficulty on the head, upper back and upper arm postures and activity of the descending trapezius during a simulated mouse task. Methods. Healthy female university students (N?=?15) were evaluated. The work surface was positioned at elbow height (EH) and above elbow height (AEH) and the task difficulty was set at low (LD) and high (HD) levels. The postures were recorded by inclinometers. Trapezius activity was normalized by the maximum voluntary isometric contraction (MVIC). Results. Significantly higher head flexion was found at EH compared to the AEH condition, with an average difference of 2°–5° at the same difficulty level. The HD task significantly increased head (3°–6°) and upper back flexion (6°–7°) at the same table height. For upper arm elevation and trapezius activation, the AEH condition presented higher upper arm elevation (about 6°–8°) and trapezius activity (0.8–1.4% of MVIC), regardless of the difficulty level of the task. Conclusions. Head posture was influenced by the table height and task difficulty; the upper back posture by high difficulty; and upper arm posture and trapezius activity were only influenced by table height.     

Inter-laboratory validation of an ISO test method for measuring enzyme activities in soil samples using colorimetric substrates

Environmental Science and Pollution Research - The evaluation of soil quality requires the use of robust methods to assess biologically based indicators. Among them, enzyme activities are used for...     

A review of the cost and effectiveness of solutions to address plastic pollution

Environmental Science and Pollution Research - Plastic usage increases year by year, and the growing trend is projected to continue. However as of 2017, only 9% of the 9 billion tons of plastic...