Using fuzzy set theory to address the uncertainty of susceptibility to drought

This paper presents the technical aspects of a new methodology for assessing the susceptibility of society to drought. The methodology consists of a combination of inference modelling and fuzzy logic applications. Four steps are followed: (1) model input variables are selected—these variables reflect the main factors influencing susceptibility in a social group, population or region, (2) fuzzification—the uncertainties of the input variables are made explicit by representing them as ‘fuzzy membership functions’, (3) inference modelling—the input variables are used to construct a model made up of linguistic rules, and (4) defuzzification—results from the model in linguistic form are translated into numerical form, also through the use of fuzzy membership functions. The disadvantages and advantages of this methodology became apparent when it was applied to the assessment of susceptibility from three disciplinary perspectives: Disadvantages include the difficulty in validating results and the subjectivity involved with specifying fuzzy membership functions and the rules of the inference model. Advantages of the methodology are its transparency, because all model assumptions have to be made explicit in the form of inference rules; its flexibility, in that informal and expert knowledge can be incorporated through ‘fuzzy membership functions’ and through the rules in the inference model; and its versatility, since numerical data can be converted to linguistic statements and vice versa through the procedures of ‘fuzzification’ and ‘defuzzification’.     

Combined influence of food level and inoculation density on competition between <Emphasis Type="Italic">Anuraeopsis fissa</Emphasis> and <Emphasis Type="Italic">Brachionus patulus</Emphasis> or <Emphasis Type="Italic">Brachionus macracanthus</Emphasis> (Rotifera: Brachionidae)

We tested separately the effect of two taxonomically related rotifers (B. patulus and B. macracanthus) on the population dynamics of another species (A. fissa) at low (0.5 ×10 ⁶) and high food levels (1.5 × 10⁶ cells/ml of Chlorella vulgaris) using different inoculation densities (0–100%). We also quantified the impact of A. fissa on the two brachionid species. Regardless of the presence of the competing species, an increase in the availability of food led to increase in the abundances of the three rotifers. The population growth of B. patulus, B. macracanthus, or A. fissa was affected negatively when cultured together with another species. An increase in the initial density of any one of the competing species became advantageous to maintain a certain population size. At a low algal food level, B. patulus was able to suppress A. fissa more strongly than B. macracanthus. On the other hand, at a high food level, B. macracanthus suppressed the population of A. fissa more strongly than B. patulus. Peak population densities for A. fissa varied from about 150 to 1000 ind./ml, depending on food density and the presence of competitors. The rate of population increase (r) of A. fissa, B. patulus, and B. macracanthus increased with an increase in food availability but decreased with increasing initial density of the competitor. Both Brachionus spp. experienced negative growth rates in the presence of A. fissa, especially at a high initial density of the latter. Published in Russian in Ekologiya, 2007, Vol. 38, No. 5, pp. 381–390. The article was submitted by the authors in English.     

RESEARCH: Shrub Propagation Techniques for Biological Control of Invading Tree Species

Cornus stolonifera, Salix petiolaris, and Spiraea alba clones already located within the corridor of an electrical power line. To establish the efficiency of treatments, we examined the statistical differences of growth traits between species and treatments. An analysis of the effects of layering shows, after the first growth season, differences for all growth traits in only one species, Spiraea alba. After the second growth season, we observed the development of new aerial stems. Layering favors horizontal expansion of shrubs over height development. The third year after treatment, the effect of layering is reduced except for Cornus stolonifera, which continuously increases, as shown by the significant progression of the clone issued from the layer even five years after treatments. With the cutting back technique, we expected a distinct vertical growth of the shrubs at the expense of increasing the crown diameter. This technique would be best associated with the rejuvenation of clones, followed by a layering of new shoots to allow a horizontal expansion of the shrubs. Therefore, the formation of a dense shrub community by layering should be considered a valuable approach for the biological control of undesirable trees in powerline rights-of-way.     

为了有效地控制波罗的海的污染:对当前一些污染减排政策失败的剖析及建议

我们应用生态-经济学模型,研究了波罗的海国家关于将每一个国家的营养物质排放总量减少一半的宣言.这一模型包括以国家为基础的减排污染物费用函数和描述磷和氮如何从一国流动到另一国的转移系数(由波罗的海水文学模型估算而得).结果表明,就氮而言,目前的减排政策和成本一效益政策相比,减排费用非常高,而且各国受益不平衡.可以预料,那些减排边际成本高的国家,其执行上述减排协定以及对氮的减排投资的兴趣不会太大,这一结论已被我们的数据所证实=因此,我们建议并概要地提出一种联合执行政策,以使减排具有成本效益并鼓励进行减排投资.     

Critical loads for Finnish lakes: comparison of three steady-state models

Three simple steady-state water-chemistry models are used to calculate critical loads of sulfur for lakes in Finland. Because of the high concentrations of organic matter in Finnish lakes, the influence of organic anions on the calculation of critical loads has been given special attention. The first two methods are well known ion-balance methods which have been used in many previous lake-acidification studies. The third method, developed for this study, includes the numerical solution of equilibrium equations for organic anions, inorganic carbon species and inorganic monomeric aluminum. The original pH and aluminum concentration of the lakes are estimated with this model, and a method to estimate the original acid neutralizing capacity (ANC) by simulating a Gran-titration is also tested on the lake data. Uncertainty in the predictions is estimated by varying the most critical model parameters.     

Yield and grain quality of spring wheat (Triticum aestivum L., cv. Drabant) exposed to different concentrations of ozone in open-top chambers

Spring wheat (Triticum aestivum L., cv. Drabant) was exposed to different concentrations of ozone in open-top chambers for two growing seasons, 1987 and 1988, at a site located in south-west Sweden. The chambers were placed in a field of commercially grown spring wheat. The treatments were charcoal-filtered air (CF), non-filtered air (NF) and non-filtered air plus extra ozone (NF(+)). In 1988, one additional ozone concentration (NF(++)) was used. Grain yield was affected by the ozone concentration of the air. Air filtration resulted in an increase in grain yield of about 7% in both years, compared to NF. The addition of ozone (NF(+), NF(++)) reduced grain yield and increased the content of crude protein of the grain in both years. Filtration of the air had no significant effect on the content of crude protein, compared to NF. The results showed a strong positive chamber effect on grain yield in the cold and wet summer of 1987. In 1988, there was no net chamber effect on grain yield. The relative differences between the CF, NF and NF(+) treatments with respect to grain yield were of the same magnitude in the two years, despite the very different weather conditions.     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.