Allelopathic effects of weeds extracts against seed germination of some plants

This study investigated the allelopathic effects of various weeds extracts on seed germination of 11 crop species. Most of the weed extracts tested had inhibitory effects on seed germination of common bean, tomato, pepper, squash, onion, barley, wheat, and corn at different application rates as compared with the 10% acetone control. Chickpea seed germination was inhibited by extracts of Solanum nigrum L., Chenopodium album L., and Matricaria chamomilla L. (10%, 20% and 22.5%, respectively) at the end of 21 day incubation period. However, Glycyrrhiza glabra L., Sorghum halepense (L.) Pers., and Reseda lutea L. extracts stimulated chickpea seed germination at the rates of 95%, 94%, and 93%, respectively, compared to control. It was concluded that some of the weed extracts tested in this study could be used as inhibitor while others could be used as stimulator for the crops.     

Water quality assessment and meta model development in Melen watershed – Turkey

Istanbul, being one of the highly populated metropolitan areas of the world, has been facing water scarcity since the past decade. Water transfer from Melen Watershed was considered as the most feasible option to supply water to Istanbul due to its high water potential and relatively less degraded water quality. This study consists of two parts. In the first part, water quality data covering 26 parameters from 5 monitoring stations were analyzed and assessed due to the requirements of the “Quality Required of Surface Water Intended for the Abstraction of Drinking Water” regulation. In the second part, a one-dimensional stream water quality model with simple water quality kinetics was developed. It formed a basic design for more advanced water quality models for the watershed. The reason for assessing the water quality data and developing a model was to provide information for decision making on preliminary actions to prevent any further deterioration of existing water quality. According to the water quality assessment at the water abstraction point, Melen River has relatively poor water quality with regard to NH₄⁺, BOD₅, faecal streptococcus, manganese and phenol parameters, and is unsuitable for drinking water abstraction in terms of COD, PO₄^3?, total coliform, total suspended solids, mercury and total chromium parameters. The results derived from the model were found to be consistent with the water quality assessment. It also showed that relatively high inorganic nitrogen and phosphorus concentrations along the streams are related to diffuse nutrient loads that should be managed together with municipal and industrial wastewaters.     

Advanced oxidation treatment of physico-chemically pre-treated olive mill industry effluent

In this study, the applicability of physico-chemical methods was investigated for the pre-treatment of the olive mill effluents prior to the discharge into the common sewerage ending with a municipal wastewater treatment plant. The samples were taken from an olive oil industry operated as three-phase process located in Turkey. Various pre-treatment methods including acid craking, polyelectrolyte and lime additions were applied. Advanced oxidation study using Fenton's process was also investigated following pre-treatment by acid cracking and cationic polyelectrolyte. Acid cracking alone gave satisfactory treatment efficiencies and polyelectrolite additions to the acid-cracked samples enhanced treatment efficiency. Since a complete treatment plant is available at the end of the sewer system, results indicated that the effluents of the investigated industry could be discharged into the municipal sewerage in the case of total chemical oxygen demand (COD_tot), suspended solid (SS) and volatile suspended solid (VSS) concentrations according to the Turkish Water Pollution Control Regulation after pre-treatment with 5 ppm anionic polyelectrolyte following acid cracking. The minimum COD_tot, SS and VSS removals were observed when raw wastewater was pre-treated with lime and the discharge standards to the municipal sewer system could not be met. Advanced oxidation with Fenton's process was applied after acid cracking and cationic polyelectrolyte treatment in order to investigate further reduction in chemical oxygen demand (COD) concentration for minimizing the influence of this industrial discharge on the existing municipal wastewater treatment plant. Results indicated that COD_tot removal increased up to 89% from 74% after Fenton's oxidation for the acid cracked samples in which cationic polyelectrolite (10 ppm) was added.     

Advanced physico-chemical treatment experiences on young municipal landfill leachates

In this study, Membrane Filtration (UF+RO), Struvite (MAP) precipitation and ammonia stripping alternatives were studied on biologically pre-treated Landfill Leachate. The results indicated that the system including the Upflow Anaerobic Sludge Blanket Reactor (UASBR) and Membrane Reactors (UF+RO) has been offered as an appropriate treatment alternative for young landfill leachates. This system provided high removals of COD, colour and conductivity (>98-99%). For ammonia removal, struvite precipitation was applied at the stoichiometric ratio (Mg:NH4:PO4=1:1:1) to anaerobically pre-treated raw landfill leachate effluent having an influent ammonium concentration of 2240 mg/l. Maximum ammonium nitrogen removal was observed as 85% at pH of 9.2. In ammonia stripping following 2 h of aeration, the removal was 72% at pH=12 while the removals were around 20% at pH=10 and pH=11. When membrane reactor, and struvite precipitation or ammonia stripping was applied to anaerobically pre-treated effluents, the results indicated that each system could be used as an appropriate post-treatment option for young landfill leachates. In economic aspect, ammonia stripping was found as the cheapest alternative with high ammonium removal. However, when both high COD and ammonium removals were to be achieved membrane technology such as UF+RO (SW) could be considered as the most appropriate system due to the fact that COD removal could be obtained very low by ammonia stripping.     

Effects of azadirachtin on Beet soilborne pomovirus and soil biological properties on sugar beet

Beet soilborne pomovirus (BSBV) is an important soilborne virus disease in growing areas of sugar beet. BSBV was transmitted by Polymyxa betae Keskin. Effects of azadirachtin on BSBV and soil biological properties were studied under a greenhouse. The presence of BSBV was tested in soil samples using bait plant test and triple antibody sandwich-enzyme-linked immunosorbent assay (TAS-ELISA). The concentration of BSBV in sugar beet roots was significantly reduced by the application of azadirachtin to the soils. TAS-ELISA absorption values in 1.52, 3.04, and 7.60 ppm were lower than that 0.38 and 0.76 ppm of azadirachtin. Furthermore, in this study, it was determined the 0.38, 0.76, and 1.52 ppm doses of azadirachtin in soils had high amounts of soil biological properties (Cmic, BSR, DHA), while the 3.04 and 7.60 ppm doses had no statistical significance compared to the control treatments.     

Advanced oxidation treatment of physico-chemically pre-treated olive mill industry effluent

In this study, the applicability of physico-chemical methods was investigated for the pre-treatment of the olive mill effluents prior to the discharge into the common sewerage ending with a municipal wastewater treatment plant. The samples were taken from an olive oil industry operated as three-phase process located in Turkey. Various pre-treatment methods including acid craking, polyelectrolyte and lime additions were applied. Advanced oxidation study using Fenton's process was also investigated following pre-treatment by acid cracking and cationic polyelectrolyte. Acid cracking alone gave satisfactory treatment efficiencies and polyelectrolite additions to the acid-cracked samples enhanced treatment efficiency. Since a complete treatment plant is available at the end of the sewer system, results indicated that the effluents of the investigated industry could be discharged into the municipal sewerage in the case of total chemical oxygen demand (COD(tot)), suspended solid (SS) and volatile suspended solid (VSS) concentrations according to the Turkish Water Pollution Control Regulation after pre-treatment with 5 ppm anionic polyelectrolyte following acid cracking. The minimum COD(tot), SS and VSS removals were observed when raw wastewater was pre-treated with lime and the discharge standards to the municipal sewer system could not be met. Advanced oxidation with Fenton's process was applied after acid cracking and cationic polyelectrolyte treatment in order to investigate further reduction in chemical oxygen demand (COD) concentration for minimizing the influence of this industrial discharge on the existing municipal wastewater treatment plant. Results indicated that COD(tot) removal increased up to 89% from 74% after Fenton's oxidation for the acid cracked samples in which cationic polyelectrolite (10 ppm) was added.     

Acute nitrate poisoning in two cattle

Abstract

The rate and product composition during photooxidation of aromatic hydrocarbons (toluene, o‐, m‐, p‐xylene and cumene) dissolved in n‐hexane and spread as a liquid film on water is reported. The photo degradability of these chemicals is 10–20%. The products identified are oxygenated aromatic compounds. It is observed that the absorption bands of the compounds under investigation depend upon the partial pressure of dissolved oxygen and these bands extend up to 290 nm. The new absorption band around 290 nm is probably due to broadening of ¹L_b bands which is responsible for direct photolysis.

stream. We have been especially interested in investigating the rate of disappearance and distribution of main oxidation products in two phases. Besides that an attempt has been made to throw some light on the reaction mechanism.